Action Army AAC T11
Upgrades include:
AAC T11                                                                                  £159.99
Action Army red hop chamber                                               £49.99
Sniper mechanics flamingo 60 deg bucking                           £8.95
Stalker panthera CNC nub                                                       £9.95
Maple leaf 6.02 430mm barrel                                               £30.00
Maple leaf vortex cylinder                                                      £49.99
Action Army bearing spring guide                                          £22.99
Action Army M150 spring (cut down)                                     £12.95
TTI  90 degree airbrake piston                                                £27.95

Mods:
Custom steel seer (standard is some soft metal)
Can mod around spring guide and inside piston to reduce noise
Solder wrapped in electrical tape to increase piston weight
3D printed TDC wheel by csakip on thinyiverse (installed using epoxy)(uses 14mm bolt)

Accessories:
2x Action Army 50rd mags                                                      £25.98
Theta optics 3-9x40 scope                                                    £34.99
Nuprol Harris bipod                                                                  £29.99
Action Army 14mm CCW suppressor adapter                       £10.95
Novritsch classic rifle cover                                                    £29.06

Camo:
Was originally sprayed but is now wrapped in Jack Pyke camo tape and Scappa tape crafted lightly with a KMCS crafting pack

Spares:
Original hop chamber (few screws missing)                          
Original bucking (In old chamber)                                                                     
Original cylinder head
Maple leaf MR hop 70 deg                                                    
Custom made fps ring (increases fps/ joulage)                     
2x piston o rings
2x spare TDC turret (closed top)

1x spare TDC bolt (12mm bolt - shorter to allow for closed turret)

Backstory:                                                           

I got this rifle 2-3 years ago to get into sniping and I quickly went down the rabbit hole into upgrading and fine tuning my rifle. About 4 months ago I got an SRS as I kept getting stuck in hide positions at my local site. In that way the SRS suits me better and now I want to try a gbbr and I need funds so unfortunately the VSR has to go.

The gun is all in working order and shoots lovely. I ran it with a hexx suppressor but you'll have to get your own. If you wanted even more performance I’d get a sniper mechanics WASP and cylinder head for it but its plenty good enough as it is.

After last game I gave it a full service, re-greasing the o-rings and replacing the flamingo bucking
 

If you wanted to build this rifle new it would cost about £500 excluding any mods
Asking for £325

Collection in person or can be shipping for additional cost
UK buyers only. Message me for any further information or pictures.
Payment via PayPal