For sale is a brand new Arthurian Airsoft Excalibur Crusader M16. I purchased this with the 203 attached but  decided to go for a recoil and have fitted 203 to that. This didn’t come with front sling ring due to the 203 but will look to obtain one for it. I have fitted the front  rail system from recoil to this. Average FPS 334 as per test sheet.  
£250.00 Collection preferred south Lincolnshire, if postage is required buyer to cover costs. 
 

The outer barrel of this M16 AEG measures at 19″ with a 500mm inner barrel. The front sight is a fixed ‘A’ frame sight and it uses a standard delta ring.

Upper Receiver

The upper receiver on the Excalibur Crusader is equipped with the standard 20mm Picatinny rail on the top, and the usual carrying handle already attached. One thing that makes this gun stand out is that although the forward assist is a dummy version it still moves back and forth when pressed.

Dust Cover

The dust cover on this M16 AEG locks into place and flips down when the charging handle is pulled, this also reveals the hop-up unit. When the mock bolt plate comes back, it locks into place so the user can easily adjust the hop up without having to keep pulling the charging handle back. This can be released again by pressing the bolt stop on the lower receiver.

Lower Receiver

The lower receiver noticeably bears the ‘Excalibur’ logo laser engraved on the left side of the mag well. The bolt release, as mentioned before, releases the locking bolt plate. The fire selector settings are engraved with the standard ‘Safe’, ‘Semi’ & ‘Auto’ setting with a selector switch which clicks positively into place on each firing mode.

The Gearbox

The gearbox is very well constructed with components you’d expect from most mid-range AEGs, however, the Excalibur Crusader comes preinstalled with 8mm bearings, a 15 metal tooth piston, enhanced tappet plate and of course the E&C spring change system.