Tokyo Marui MWS URGI

[Bashir]

I had bought this gun from someone then realised i dont have time for the headache of looking after and taking care of a GBBR properly so before any problems arise i rather sell it for a good price to someone who will look after it properly

 

Please note:
Includes 1 Pmag which is leaking gas which i will give for free (unless i get it serviced and repaired before a buyer comes)

I can also add 1 green gas bottle for £7 each
Have 2. 

Scope not included

Upgrades:
Waldo dynamics return spring
Jaeger precision Hop Nub
Flamingo Bucking
Unicorn reinforced Nozzle Set
Federal concepts Npas
Recoil buffer

Wasdn torch and mount
Fore Grip

3x Gas tight mags, ( 1 original tm mag and 2 pmags
I also have which will come with the gun:
Spare waldo dynamics return spring
Waldo dynamics hop arm
Original return spring
Unicorn aluminium Nozzle Set.


Ive used it in garden and in game

good condition
Only mark on it is inside the magwell where a stone got caught on the mag as I was loading and caused a scratch which doesnt effect it in anyway and can't be seen unless looking inside the mag well
 

Edited 14 hours ago by Bashir
Forgot a detail

[Galvatron]

I'd estimate between £570 and £600.

 

The internal upgrades improve reliability and flexibility but from a value proposition, they add only add so huge amount as they're replacing original internals. If you have the original parts, you may see another £30-40. If the leaking P-Mag is repaired, that should add another £35.

 

For the benefit of sticklers for detail, do you know the brand and model of the recoil buffer, if the Flamingo bucking is 50 or 60 degree and if the JP nub is the polymer or aluminium spec?

 

It may also be worth pointing out which brand of green gas you're offering.

[Galvatron]

I assume you'd posted that also on Used Airsoft. At that price, you should get interest quickly as the MK18 URGI has shot up in retail price over the past few months. It's usually between £650 and £700 brand new.

Edited 13 hours ago by Galvatron

[shatis]

if it helps i bought mine a couple months back for around 640 with 3 mags and similar internal upgrades. mine did come with a sig red dot and suppressor tho.

[Bashir]

6 hours ago, Galvatron said:

I assume you'd posted that also on Used Airsoft. At that price, you should get interest quickly as the MK18 URGI has shot up in retail price over the past few months. It's usually between £650 and £700 brand new.

Thanks for your response! I will need to check after work. 
 

Also the original mws mag holds gas but when i do put the gas in, it hisses from the sides however when i remove the back plate then put the gas in it does not do that. Any idea why?

2 hours ago, shatis said:

if it helps i bought mine a couple months back for around 640 with 3 mags and similar internal upgrades. mine did come with a sig red dot and suppressor tho.

Ahh thanks for the reply, maybe i might put it up for £530-540 ish 

[Galvatron]

5 hours ago, Bashir said:

Also the original mws mag holds gas but when i do put the gas in, it hisses from the sides however when i remove the back plate then put the gas in it does not do that. Any idea why?

 

 

Do you mean the sides of the back plate or at the top of the mag? The O ring around the input valve or that around the stem may have worn or dried where its now pushed up by the plate and breaks the seal. The O ring may either need to be reseated or replaced entirely.

[Bashir]

35 minutes ago, Galvatron said:

 

Do you mean the sides of the back plate or at the top of the mag? The O ring around the input valve or that around the stem may have worn or dried where its now pushed up by the plate and breaks the seal. The O ring may either need to be reseated or replaced entirely.

From the back plate just where the valve sits. Visually i can’t see anything leak out but i do hear the gas escaping whilst filling. Also after testing its only able to shoot 10bbs roughly before running out of gas