Ulmocuk Posted April 11 Share Posted April 11 Ive been looking to buy FEDA npas for my noveske mws anyone knows a good site to buy? Unfortunatly I couldnt find any company sells that Npas within the uk any help appriciated. Link to comment Share on other sites More sharing options...
GiantKiwi Posted April 11 Share Posted April 11 21 minutes ago, Ulmocuk said: Ive been looking to buy FEDA npas for my noveske mws anyone knows a good site to buy? Unfortunatly I couldnt find any company sells that Npas within the uk any help appriciated. Get the Jaeger Precision one as it doesn't have squiffy QC issues, the updated one will fit in the stock nozzle, whereas the FEDA one requires you to replace the stock nozzle with a Guns Modify one. https://jaegerprecision.co.uk/products/jaeger-precision-mws-npas-adjustable-valve Link to comment Share on other sites More sharing options...
Ulmocuk Posted April 11 Author Share Posted April 11 55 minutes ago, GiantKiwi said: Get the Jaeger Precision one as it doesn't have squiffy QC issues, the updated one will fit in the stock nozzle, whereas the FEDA one requires you to replace the stock nozzle with a Guns Modify one. https://jaegerprecision.co.uk/products/jaeger-precision-mws-npas-adjustable-valve I did try this product but for some reason it did not fit perfectly. After one game destroyed totally maybe I made some mistake during the fitting in but did watch alot of video to fit that in maybe dosent fit for noveske m4 model? Lately I am researching alot for Npas because noveske too hot for most of the airsoft sites. So seeking any advice to lowering the fps. I tried 1.0 gas did not helped wasnt lucky with Npas situation as well so dont know what else I can do. Link to comment Share on other sites More sharing options...
Angelvill3 Posted April 11 Share Posted April 11 5 hours ago, Ulmocuk said: I did try this product but for some reason it did not fit perfectly. After one game destroyed totally maybe I made some mistake during the fitting in but did watch alot of video to fit that in maybe dosent fit for noveske m4 model? Lately I am researching alot for Npas because noveske too hot for most of the airsoft sites. So seeking any advice to lowering the fps. I tried 1.0 gas did not helped wasnt lucky with Npas situation as well so dont know what else I can do. If you use the stock DE nozzle you need to very slightly file the sides of the npas to fit apparently. It's designed around the TM stock nozzle as a drop in. Sims is dim explains this in his latest n4 mws upgrade video Link to comment Share on other sites More sharing options...
GiantKiwi Posted April 12 Share Posted April 12 18 hours ago, Ulmocuk said: I did try this product but for some reason it did not fit perfectly. After one game destroyed totally maybe I made some mistake during the fitting in but did watch alot of video to fit that in maybe dosent fit for noveske m4 model? Lately I am researching alot for Npas because noveske too hot for most of the airsoft sites. So seeking any advice to lowering the fps. I tried 1.0 gas did not helped wasnt lucky with Npas situation as well so dont know what else I can do. When did you try it? It was updated this week to make it work with the DE and Salvo precision stuff specifically, the older one also required replacing the nozzle with a GM just like the FEDA. I don't get how it was too hot though, as to get joule creep to bring it over the limit on the stock DE inner barrel, I had to use higher pressure gases + 0.43g BBs. Unless of course, you've accidentally gone and bought the not quite MWS CYMA Gas System version, at which point you're up shit creek without a paddle. Link to comment Share on other sites More sharing options...
Ulmocuk Posted April 13 Author Share Posted April 13 (edited) On 12/04/2025 at 07:55, GiantKiwi said: When did you try it? It was updated this week to make it work with the DE and Salvo precision stuff specifically, the older one also required replacing the nozzle with a GM just like the FEDA. I don't get how it was too hot though, as to get joule creep to bring it over the limit on the stock DE inner barrel, I had to use higher pressure gases + 0.43g BBs. Unless of course, you've accidentally gone and bought the not quite MWS CYMA Gas System version, at which point you're up shit creek without a paddle. When I got it as stock I did upgrade 60 flamingo , Jaeger Precision Titan Nub, Maple Leaf 250 GBB Crazy Jet straight away. then fps went up to 420+ I wanted to bring it down to 350 with Npas did try jaeger but didnt worked for me. I watched the video Angel told me from simsisdim but hes basically saying that need to shave off a little bit to fit it in. So I didnt wanted to hard mod my stock bolt carrier. So now I have purchase angrygun high speed bolt carrier with Gen2 MPA Nozzle completed set which comes with Npas to adjust the nozzle power lets see if thats gonna work. Edited April 13 by Ulmocuk Link to comment Share on other sites More sharing options...
Diablo675! Posted April 14 Share Posted April 14 If your fitting the Jaeger Npas into the DE nozzle you modify the NPAS not the bolt carrier or the nozzle. Or just replace the DE nozzle with a Tm one or G&P spec then the Npas will fit right in. I fitted the Jaeger into my partners mk18 and worked flawless fitted the Npas to my L119a2 and constant 1.1j on .32s using propane Ulmocuk 1 Link to comment Share on other sites More sharing options...
Ulmocuk Posted April 14 Author Share Posted April 14 19 minutes ago, Diablo675! said: If your fitting the Jaeger Npas into the DE nozzle you modify the NPAS not the bolt carrier or the nozzle. Or just replace the DE nozzle with a Tm one or G&P spec then the Npas will fit right in. I fitted the Jaeger into my partners mk18 and worked flawless fitted the Npas to my L119a2 and constant 1.1j on .32s using propane I still keep the Jaeger Npas after trying out Angry gun complete bolt carrier will see maybe I keep that as backup with the nozzle mod. Link to comment Share on other sites More sharing options...
Diablo675! Posted April 14 Share Posted April 14 1 hour ago, Ulmocuk said: I still keep the Jaeger Npas after trying out Angry gun complete bolt carrier will see maybe I keep that as backup with the nozzle mod. Yeah they are a great to keep spare. I have 3 spare one with a diy Npas and G&P nozzle setup I main my BCM Jaeger Npas and dynamic spring set Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now