Jump to content

ASG CZ P-09 polymer slide venting all gas after a few shots.


Pistolguy
 Share

Recommended Posts

Hello. I own a new ASG CZ  P09 GBB pistol with polymer slide. The problem is that it can barely  fire 3-5 shots before short stroking and then venting all the gas in the magazine. Even at the first couple of shots you can see the gas escaping through the slide and the pistol gets cold almost instantly. I have sent it back at the retailer but they did not help as they insist there is no problem with the pistol. I have tried different magazines, shot it lubed and oiled, shot it dry, changed the nozzle along with its o-rings, nothing changed. Can anyone suggest a possible solution? Thank you.

Link to comment
Share on other sites

Where did you test it that you had this problem? Giving the retailer the benefit of the doubt of testing it and seeing no problem, have you been using your pistol in outdoors or in an otherwise cold environment when you had this gas venting problem?

Link to comment
Share on other sites

 

 

 

I have tested it out both indoors and outdoors, summer and winter time. It fares marginally better during summer time, meaning it vents all the gas at about 7-8 shots instead of 5. Gas escape from the slide during firing is also present in the warmer weather.

Edited by Pistolguy
Link to comment
Share on other sites

Have you checked the hammer assembly? That's my next port of call after you've ruled out the magazine, the nozzle and its O-rings and ambient temperatures. I've had gas venting and firing in full auto (on a Hi-Capa) because a sear spring was seated incorrectly.

Link to comment
Share on other sites

1 hour ago, Galvatron said:

Have you checked the hammer assembly? That's my next port of call after you've ruled out the magazine, the nozzle and its O-rings and ambient temperatures. I've had gas venting and firing in full auto (on a Hi-Capa) because a sear spring was seated incorrectly.

 

I checked, t is certainly not that. It doesn't really go full auto, it just short strokes by itself after the first 3-5 shots without actually shooting anything. It usually happens at the point the pistol gets extremely cold, regardless of the previous temperature. If I insert a fresh magazine at that point I can fire for another 3-5 shots before short stroking and venting gas again.

Edited by Pistolguy
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...