Bro12 Posted August 9, 2019 Share Posted August 9, 2019 I am just after a little advice. I have been purchased a Modify XTC PDW and went to get batteries for it (11.1v). My gun tech was saying that I should not run them in it due to issues seen with CQB G1’s. Has anyone had any issues or heard of any? I haven’t seen anything about it. Thanks in advance Link to comment Share on other sites More sharing options...
Guest Yukarin Posted August 9, 2019 Share Posted August 9, 2019 Generally not a good idea to run a 11.1v LiPo in any gun unless it has a mosfet and both shimming and AOE have been corrected. It puts a lot more stress on the gearbox. Link to comment Share on other sites More sharing options...
Bro12 Posted August 9, 2019 Author Share Posted August 9, 2019 7 hours ago, UKCYukarin said: Generally not a good idea to run a 11.1v LiPo in any gun unless it has a mosfet and both shimming and AOE have been corrected. It puts a lot more stress on the gearbox. That's what I thought but going on the manufacturers advice 11.1s are recommended. May just go low until I do the upgrades. Link to comment Share on other sites More sharing options...
Guest Yukarin Posted August 9, 2019 Share Posted August 9, 2019 Nothing wrong with the performance of a 7.4v LiPo tbh. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.