spook Posted November 5, 2012 Share Posted November 5, 2012 Hi guys this is my 1st post here. I hope you guys can help. I have just bought an SRC G36c gen 3 as stated in the subject title. However, when i pull back the charging handle to reveal the hop-up system, it can be kinda stiff and does not release on its own. It has to be pushed foward again. Its not a big deal tbh but I wondered if any of you guys had a fix for this. Thanks Link to comment Share on other sites More sharing options...
rschris Posted November 5, 2012 Share Posted November 5, 2012 hi mate, Had the same thing on mine. If you have the knowledge on taking the gun apart then lube it on the inside and will slide alot smoother. Alternatively spray lube from above and just put it back and forth a bit and will loosen a bit Link to comment Share on other sites More sharing options...
spook Posted November 5, 2012 Author Share Posted November 5, 2012 Thanks for the reply. I will have a go and see if that sorts the problem. If you have any other advice about this gun then please pass it on because any help is much appreciated. Link to comment Share on other sites More sharing options...
rschris Posted November 5, 2012 Share Posted November 5, 2012 http://www.airsoft-forums.co.uk/index.php/topic/11172-src-g36c-gen-iii-making-it-that-bit-different-body-internals/ there you go mate. any questions let me know Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.