• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

What have you made?

Anonymoose said:
How long of a barrel do you end up with?
Click to expand...
Currently mine has the stock barrel still in it but from the end of the threads on the outer it adds maybe 50mm, 40mm of useable space if you wanted a longer inner. Of course now its done I can make it longer or shorter. I mainly did this to give me more room to hang onto it as a foregrip on the original handguard was cramped. 

 
yeah, the fake bolt release and the dimpled barrel are 3D printed. I need to finish modelling the fire selectors which will be 3D printed until my CNC machine turns up and then I'm planning on making them out of Aluminum. 

 
mightyjebus said:
yeah, the fake bolt release and the dimpled barrel are 3D printed. I need to finish modelling the fire selectors which will be 3D printed until my CNC machine turns up and then I'm planning on making them out of Aluminum. 
Click to expand...
Ah cool - out of interest, how much would one expect roughly on recreating such a thing of beauty please?  :D

 
Last edited by a moderator:
ruskitseller said:
Ah cool - out of interest, how much would one expect roughly on recreating such a thing of beauty please?  :D
Click to expand...
Sadly it's going to be a 1 of 1 simply because finding all the parts is becoming a pain and extra expensive as everything needs to be shipped from Asia. 

 
mightyjebus said:
Sadly it's going to be a 1 of 1 simply because finding all the parts is becoming a pain and extra expensive as everything needs to be shipped from Asia. 
Click to expand...
Yes I am not surprised, I was going to try making one myself and using the Lancer Tactical - 32 13" Gen 3 as a base but it would need a lot of work and money to get it close...if you half shut your eyes and look at it through binos the wrong way around...KS-1 from Wish  :D




 
Last edited by a moderator:
ButcherBill said:
Apart from... because I can.

can I ask why?
Click to expand...


Because i bought an AEG barrel for my MP5 not realising that they use an AEP barrel and bucking. Since i've bought another MP5 NGRS and i have this already it made sense to convert it. (And AEG barrels are half the damn price of MP5-specific ones.)

The only apparent difference being the two slots in the sides to locate the bucking and the groove up front for an O-ring.

 
Made a T238 Griffon tracer fit inside my TM MP7 suppressor 



20250111_200555.mp4
 
Last edited by a moderator:
A horizontal pouch to house a little 13CI HPA bottle, keeping it nicely tucked out of the way and not bouncing around on the back of the belt. Primarily for use with my recently converted L96 with a Mancraft SDIK. I couldn't find any ready made solutions on the market, so resorted to making my own with leftover bits and bobs that I had+ a 20 year old sewing machine!

View attachment 143854

 
Few little jobs today:

The barrel on my SCAR-H SSR has a necked down section just behind the flash hider that looked odd. Had a spare M16 thread protector that i bored out and cut down. Bit of test fitting and light cuts to get the flash hider clocked to have the flats vertical. It doesn't look quite right but it's better.

View attachment 143943

Also made an ally charging handle for it, instead of the plastic one it came with. Just needs painting now:

View attachment 143944

View attachment 143945

Then converted a spare 18C to a 17 G3 as i'm nicking the full-auto bits for another build. Some little milling cuts inside the slide and made a "spacer bar" that sits under the rear sight:

View attachment 143946

View attachment 143947

View attachment 143948

 
You must log in or register to reply here.

Similar threads

A
Calling all that have a 3D printer, MOSQUITO Open Beta test!
Replies
12
Views
5K
Speedbird_666
Speedbird_666
sp00n
What have you just 3d printed (for airsoft)
22 23 24
Replies
471
Views
86K
MrTea
MrTea
Hef Legend
Snipermechanics SRS Guide
Replies
0
Views
7K
Hef Legend
Hef Legend
jeremythegenius
Mil-Tec Ghillie suit review
Replies
5
Views
5K
Happy
Happy
Back
Top