• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

What have you made?

HuttArmouries said:
Working on making a hk21 machinegun out of an old jg g3. The handguard is nearly done but I still need to make the outer barrel and barrel swap handle. Then its onto makeing an adapter to make the magwell look like its belt fed. Planning to make a snap in piece that I can attach a modified cmag to with a box around it. Should be able to just pull the adaptor and switch to using normal mags just fine if I need. not going for 100% accurate. Im going for the overall look with a few quality of life things like picatinny for a foregrip and bipod. 
Click to expand...


I love it! Did you print the handguard? 

 
Been doing a bit more 3d modeling. got a fully functional slide for my glock 26 though its obviously not prettified yet. My aim is to make a dedicated red dot capable slide as I dont like how high adapter plates make them sit and I want it to be light as possible. To this end ive also got myself a cheap plastic bodied sro off aliexpress for this project. Also made some extended baseplates to slot over glock 19 mags as I dont really like grip extensions and think this looks better XD. planning to eventually do g17, g34 and g19 slides with doctor and rmr mount options. Also vaugely considering an integral muzzle break more for the fact it will reinforce the hole the spring guide goes.  Id ideally like to keep this package as compact as possible though. 

View attachment 117521View attachment 117517View attachment 117520View attachment 117519View attachment 117518

 
now ready to start making it more pretty. I am getting rid of the little overhang at the back. This sro is just a little chunky width wise. I also have some specialised nuts coming which should let me shave another mm off the height of the slide. 

View attachment 117597

 
I do love my lightweight and affordable ghillie builds. This is a summer ghillie, just in time for winter to come around :D . It's super lightweight, super breathable, nothing on my front to snag on and drag half the forest floor with me while I'm low crawling along the ground. Also has elastic loops on the base, so I can stick a bunch of natural vegetation in it too.

I have a 2nd webtex concealment vest and more than enough material to make a 2nd, so all in it'll be £120 for two ghillies, so £60 per ghillie and I'll have a summer one and a winter one. Used a lot of the green materials (not all), but still got the vast majority of the khaki and brown stuff, so a winter variant will be easy to do.

Build is:
Webtex concealment vest

Novritsch raffia (in total about 1 bag used, but mostly greens from two bags)

Novritsch camo material (less than half a bag used)

View attachment 117609View attachment 117610

 
Last edited by a moderator:
A 6x ACOG is something I really wish was more readily available and accurately copied, such a nice looking optic.

 
Last edited by a moderator:
@Egon_247 ... Australian, by any chance?  Or are you just intent on making my neck hurt?  ;)

I do love MP5's, gotta get me one some day.  Or an HK53.

 
Last edited by a moderator:
Sorry, the phone was doing odd things. I'll see if I can swap them over. ?

Edit: that's better. ??

I have a G3 that I'm slowly turning into a beastie too. Still overspinnininning but hey, I'll get it sorted. 

 
Last edited by a moderator:
Of all the pictures of objects posted on here that could be misconstrued, this post is up in the rankings it must be said.

Nice GL mate ?

 
Torn between CoolAF and Careful Now.  What sort of energy are we talking here?

 
Rogerborg said:
Torn between CoolAF and Careful Now.  What sort of energy are we talking here?
Click to expand...
Same as a normal tag shell. The co2 adapter is just a quick way to refil it between shots. Im not sure how doubling the barrel length will affect something like this but ill be running it over a chrono to compare when its built. The shells are designed to be the same weight as standard tag ones too. Ill probably lose a fair bit of pressure as 3d printed parts arent exactly air tight. Ideally id want something with about 2/3 of the velicity of a normal tag round. Regular ones are a bit spicy for me to risk using on bunkers and stuff

 
Last edited by a moderator:
3 different lengths of 3d printed glock slide. all rmr ready. Planning to do some more custom stuff now the base models are done but I also still need to get my hands on a 34

View attachment 119465

 
You must log in or register to reply here.

Similar threads

A
Calling all that have a 3D printer, MOSQUITO Open Beta test!
Replies
12
Views
5K
Speedbird_666
Speedbird_666
sp00n
What have you just 3d printed (for airsoft)
22 23 24
Replies
471
Views
86K
MrTea
MrTea
Hef Legend
Snipermechanics SRS Guide
Replies
0
Views
7K
Hef Legend
Hef Legend
jeremythegenius
Mil-Tec Ghillie suit review
Replies
5
Views
5K
Happy
Happy
Back
Top