WE/Cybergun M1A1 Thompson - Hopup Arm Dimensions/Replacements

[CoCost]

Hey All,

Been doing some work on the Pulse Rifle recently which unfortunately required a full take down. Sadly during this process i've only gone and made the foolish mistake of loosing the dam hopup arm -_ - Despite looking everywhere for it here (with no luck), as well as everywhere online for either a replacement part or 3D file, so far I have not found anything of use. Closest I could find was a 3D file for the "WE Scar GBBR Hopup Arm", but while it looks very similar externally, I suspect the dimensions are probably very different.

Bit of a big ask here! Does anyone happen to have the dimensions for this part, or would/could anyone (with callipers) dismantle and measure it for me? If so I can make and upload a 3D file so no one else has to endure this hassle. No worries if not, I'll just have to tediously reverse engineer it in that instance -_ - but figured it couldnt hurt to ask here first

Cheers

CoCost

_______________

 

[ButcherBill]

KY have a site in the UK, you might get lucky if they have the part in stock, if they don't... I got some WE parts from ebay very easily so they might be worth a shout.

 

[Austeyr]

KY have a site in the UK, you might get lucky if they have the part in stock, if they don't... I got some WE parts from ebay very easily so they might be worth a shout.

Click to shrink...

KY's UK warehouse only stock replicas. That being said, KYAirsoft will 100% have the part needed. Shipping from HK doesn't take that long either

 

[CoCost]

Thanks for the input & advise guys

Got a part on order from KY HK now so will likely have to wait a bit for it's arrival, but it'll solve the problem at least. I still intend on measuring, (3D) mapping, and printing a spare one once it arrives. Will stick the 3D file up on Cults3D/Thingverse/etc, because you (and I) know i'm going to loose it again during the next take-down

CoCost