V2 Gearbox Issue New (Second Hand Gun)

[Welshd1k]

Biught a gun off this site advertised 35ros 330fps 

Arrived Friday test fired in garden shot nice and straight 

Took it to my local. Cqb site and outdoor site today chronod 220fps 54rps!

Spoke to the seller said spring must be worn  asked around found somone with a new 100 spring and then got the on site tech to install the spring on tear down discovered the air cylinder wasn't sealing on the cylinder head and appears to be  cut on the squiff (or has bashed it self like it??) 

The pistol nozzle has been filed down?? 

And no barrel spring on the hop unit 

Spoke to seller had no reply. What would people's advice be on this situation 

Is there anytbing I could have done to cause this in 1 magazine of. 28s with the battery provided with the gun (also puffed up) 

Second used gun I've been "had with now"  maby I should just spend 160 on a new gun?? 



View attachment 65224

View attachment 65220

View attachment 65221

View attachment 65222



View attachment 65223

 

[Asomodai]

That looks pretty "Bodged to get it working enough" to me. 

I mean replacing the air seal stuff isn't the end of the world. But the seller should be paying for this stuff or offering a refund. 

 

[Sitting Duck]

YES - buy a new gun

is that gearbox an APS QC v2 with a hairline crack start to show above cylinder head ???

The first clip/pic seems to show the startings of a small crack appearing to me

though it could be a casting defect

APS boxes are known to crack if pushed though

wtf is an APS doing in a Classic Army M4

what happened to original box

how old is this gun (for real, not just 9 months old bollox)

sorry you had a bad purchase

(didn't buy it from a bloke in Ireland by chance ???)

had dealings with a fine tech seller there many years ago...

did the bloke put sawdust in the box to quieten down the gear shimming ???

 

[Welshd1k]

It was sold as fully working off this site I was happy with how it sounded it shot straight but no distance  was gutted when it chronod so low  but the rps was mental 

Only thing I see may be a issue is if the gearbox has taken damage from the cylinder smashing around 

What would be a  acceptable price to pay to get this rectified as I ain't too keen on pulling a box appart with the shims etx 

sorry you had a bad purchase

(didn't buy it from a bloke in Ireland by chance ???)

Not sure what the box is and no was from 

 

[ak2m4]

£25 - £30 for 1 hour tech work, plus parts cost.  New cylinder head, new nozzle plus what else is wrong so £50 - £60 min.  You won't really know till someone open's it up.  Also as @Sitting Duck says could be a gearbox replacement as well, add another £25 on for that.

How much did you pay in total?

 

[Welshd1k]

164 delivered  one of the lipos is down a cell and the one tgats working is puffed 

 

[Sitting Duck]

if that has a big dragon M160 motor in there it will fire like fucking high speed 45k rpm

on a spring producing 240fps that is a third of the power

but some of that is likely due to nozzle filed too short and not sealing against bucking 101%

but regardless...

the motor is over double the speed of a regular stock/std motor

or 50% more than a balanced 25~30k motor

low fps/spring, weak spring - yeah you would be hitting even more...

motor alone would shoot 25rps on 18:1 gears @ say 340fps

add in high speed gears you could acheive say 33rps on 7.4v

or 50rps on 11.1v but would be risky on 11.1v

weak spring would take it higher

money has been spent on it - perhaps

but seems like a piss poor tech assembled it

OR it WAS assembled correctly onnce but some wanna be has fucked it up

& just decided to flogg it on, cutting their losses with it and off loading it

motor if a Big Dragon M160 is way too fast, should have strong silver neodym magnets

or if not is crappy M120 with weak ferrite - very fast still but not as much grunt

(they both tend to draw too much current and run hot - m140 is best motor)

gears/box - don't know but looks like it assembled in the dark

that could be a hairline cracking starting to appear

sooooo if that is correct, then you will need to look at a new gearbox shell £25

https://www.taiwangun.com/gearbox-shell/ver-2-hybrid-gearbox-shell-aps

& time to fit it & rectify other issues

BUT I would NOT get a APS shell tbh...

you want something robust that works than a metal speed mofo in a shell that cracks if you fart near it

you can try to contact the seller and at the VERY LEAST seek the cost of a new shell

(if that is a fracture appearing - looks like it)

or a tech's time say 1hr @ £25 to sort the thing

failing that - start a paypal dispute

(please don't tell me you gifted the seller money)

I'd like to give seller benefit of the doubt & hope this issue can be resolved

but at times people selling stuff that is far from description or offloading stuff/shit on its last legs

well - that doesn't sit too well with me personally

especially when newcomers get left a little bit stung perhaps

The issue with some newcomers apart from being a bit naieve

if their UKARA hasn't come through, there are people keen to flog shit

& ask no questions or you got less comeback

(I got stung like that when I first started)

get UKARA, buy new shit and forget buying broken guns from moody sellers

(now I simply break all my own guns instead  )

 

[Robert James]

And thats why I never buy on this site  generally, from people that have no profile picture, zero posts etc. They just come on here to sell spaf

 

[ak2m4]

Where are you based mate?  Wales I'm guessing.  Maybe there's a tech based close by as shipping these things complete can get expensive.  Maybe someone on here close by?

 

[Welshd1k]

It is a m160. Motor very strong and torquey

I'll get more picturesin regards to the air cylinder and box what should I be looking to retrieve financially for it? 

So g box 25 ish 

Cylinder 10andnthen tech timso 60 70? Or just a full refund 

Paid goods (learnt with the last gun) 

 

[Sitting Duck]

And thats why I never buy on this site  generally, from people that have no profile picture, zero posts etc. They just come on here to sell spaf

I guess Zero In or Zero One forums was down that day

min 100/250/500 posts

hand note with name/date etc...

soz but many different forums adopt this rule

and any exemptions - there are some should pm mod with say ebay feedback or something

to verify their integrity

dodgy sellers can carry on with Free Ad's & other sites, but most of us on here

have a bit of integrity & not fleece others, treat as you find & all that

 

[Welshd1k]

South wales pal got a technon the site I need to ask (he discovered the issues) 

 

[ak2m4]

South wales pal got a technon the site I need to ask (he discovered the issues) 

that's good at least, if it was me I'd either want a full refund or £60 back - is the body metal or plastic?

 

[Welshd1k]

And this is the reply I get he sent a video of it shooting tracers in the night  so it's my issue the internals are broken 

View attachment 65227

 

[Sitting Duck]

was the gun shooting tracers in the dark the SAME GUN he sold you though ???

and just coz BB's come out doesn't mean it ain't near fucked

 

[Welshd1k]

I must attract all the time wasters/people that like to mug people off first my predator with a siezed gearbox now this 

View attachment 65228

 

[Sitting Duck]

If it was a G&G Predator then that has ETU

so 50% blame goes to G&G to be fair

but I wish kids trying be wannabe techs

would stop fucking up their classmates guns

(or their own - but blame it on their experienced imaginary tech)

 

[Welshd1k]

The air nozzle (aftermarket one) was jammed solid and wouldn't move and motor wires had been bodged 

 

[Sitting Duck]

how do you jam a nozzle - even tappet plate should fly freely

as ETU has no convential trigger trolley shuttling below it

must have been assembled by Stevie Wonder & Ray Charles

maybe aftermarket nozzle was way too loose on G&G tappet and got borked in use ???

wires chewed up - well by motor they can get chewed

and tbh on ETU they should run both the motor wires down back

and just have the ETU signal wire/cable by motor entry point on v2 box

 

[Welshd1k]

The nozzle was stupidly tight to pull off thinking wrong lube dried out? I'll find the video now 



View attachment 65229
Had 0 luck

View attachment 65230

View attachment 65231