TM NGRS 416

[SeniorSpaz87]

Hello,

I have the opportunity to trade of of my guns for a really nice-looking TM NGRS 416. I am 99% going to go through with it already, but figured Id get yall's opinion since they are so rare on this side of the pond.

Build list:

Tokyo Marui Next-Gen Recoil Shock 416

Gate MOSFET

Magpul CTR

suppressor

5 mags

View attachment 42473

 

[clumpyedge]

Get it

 

[Guyver1]

Pls take the following the way it is meant, as a heads up, not a criticism of your choice.

I would be slightly concerned about the wire and the "thing" wire tied to the stock.

It is either wired for self destruction and that's a bomb attached to the stock (unlikely but you never know)

Or (more likely) a battery pack. It looks to me like, the thicker wiring from the Gate that hasn't been passed through the channel in the buffer tube and under the locking ring (which is a PITA to do, but IMO looks nicer).

This could be an indicator of a 1/2 arsed job fitting the Gate.

HTH

alan

 

[SeniorSpaz87]

Pls take the following the way it is meant, as a heads up, not a criticism of your choice.

I would be slightly concerned about the wire and the "thing" wire tied to the stock.

It is either wired for self destruction and that's a bomb attached to the stock (unlikely but you never know)

Or (more likely) a battery pack. It looks to me like, the thicker wiring from the Gate that hasn't been passed through the channel in the buffer tube and under the locking ring (which is a PITA to do, but IMO looks nicer).

This could be an indicator of a 1/2 arsed job fitting the Gate.

HTH

alan

Rewiring isn’t an issue for me. Due to me work I am chummy with my

lical shop so they’ll redo it for me if I need it 

 

[Prisce]

What gun will be traded for this? I suppose that’s the most important thing.

 

[Druid799]

Agree with Guyver , if they’ve done that piss poor a job of re-wireing it what nightmares will be found inside? 

 

[SeniorSpaz87]

Pls take the following the way it is meant, as a heads up, not a criticism of your choice.

I would be slightly concerned about the wire and the "thing" wire tied to the stock.

It is either wired for self destruction and that's a bomb attached to the stock (unlikely but you never know)

Or (more likely) a battery pack. It looks to me like, the thicker wiring from the Gate that hasn't been passed through the channel in the buffer tube and under the locking ring (which is a PITA to do, but IMO looks nicer).

This could be an indicator of a 1/2 arsed job fitting the Gate.

HTH

alan

Agree with Guyver , if they’ve done that piss poor a job of re-wireing it what nightmares will be found inside? 

I asked him, and yes that's where he would run the battery. I plan to use 11.1s inside the buffer tube so I won't need that. He also said the GATE install was done by his shop and he personally hasn't opened it. So we should be good there. 

 

[jcheeseright]

You won't be running anything inside the buffer tube! I can guarantee that! 

 

[SeniorSpaz87]

You won't be running anything inside the buffer tube! I can guarantee that! 

Oh? Small tube? I guess I can run external, but Ill definitely move that wire so its not dangling. 

 

[jcheeseright]

The buffer tube is filled with the recoil weight and springs.  Best bet for a TM recoil shock is a crane stock of some kind. If you're dead set on running a CTR you can hollow out a 0.75" extended buttpad and fit a 7.4v LiPo in there.  

Wouldn't recommend running 11.1v either, firing at too high a RPS can run into problems with the recoil weight returning out of sync with the piston resulting in a very smashed piston.  

 

[SeniorSpaz87]

The buffer tube is filled with the recoil weight and springs.  Best bet for a TM recoil shock is a crane stock of some kind. If you're dead set on running a CTR you can hollow out a 0.75" extended buttpad and fit a 7.4v LiPo in there.  

Wouldn't recommend running 11.1v either, firing at too high a RPS can run into problems with the recoil weight returning out of sync with the piston resulting in a very smashed piston.  

Thanks for the info. When I lived in the UK I never even considered getting a Marui Recoil so never really looked into them, and over here they're ever rarer. I dont care at all about the CTR stock, it just comes with the package. I can use a crane no problem.

 

[jcheeseright]

Crane is the way I've gone, more room for a bigger battery.  With the Gate Titan in there 7.4v will be absolutely fine, it'll pre-cock the piston so you could run it on a janky old 7v NiMh and still get near instant trigger response ?