• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

TM MP5 NGRS Owners

Hi all, anyone know how to clean the barrel on the MP5 ngrs. Should I be removing it before cleaning to avoid damaging the hop up. I thought your meant to use the cleaning rod inserting from the hop up side to the front. 

Cheers 

 
'The standard' is to turn your hop fully off then just go from the front.  Long as you're not using anything abrasive and are careful/gentle/don't go ham fisted at it then it'll be absolutely fine, nothing adverse is going to happen.

 
Hi all,

just checking if there is anyone can point me to an Odin adapter for the slightly wider NGRS MP5 Mags?  Seems the few avil ahave sold out ? 

ta in advance

 
Caik said:
How many games have you run with this? Just got it for mine and the batteries are scarily close to the slots. don't want someone getting an actual kill on me by hitting them lol
Click to expand...
a couple of games so far. if you are worried about a bb strike then go a bit macgyver and add some black card between the rail and the battery. the card should take the sting out of the bb before it hits the battery.

 
mightyjebus said:
a couple of games so far. if you are worried about a bb strike then go a bit macgyver and add some black card between the rail and the battery. the card should take the sting out of the bb before it hits the battery.
Click to expand...
Thin plastic like the lid off a celebrations tub etc cut to size & shape will bend around the inside of your hand guard. just a thought.

 
mightyjebus said:
a couple of games so far. if you are worried about a bb strike then go a bit macgyver and add some black card between the rail and the battery. the card should take the sting out of the bb before it hits the battery.
Click to expand...
Sounds like a plan. I was just a bit worried that a lucky shot or a rental renegade would get one between the gaps and turn my gun into a melted mantlepiece.

 
Would have to say, in the first instance the chances of that are soooo close to zero, honestly wouldn't worry about it.  In the second instance, LiPos very much aren't the ultra-unstable UXOs that some (fortunately rare these days) people make them out to be; again almost no chance that a bb strike would cause your battery to ignite.

 
Last edited by a moderator:
Hey all, has anyone tried upgrading the spring to boost the fps? I'd like to run it at 345 Fps on 0.2g. I've seen the eagle6 springs for sale. Any advice would be appreciated. 

 
Does anyone (particularly A4 owners) have any photos or links as to how the rear wiring is done? I've just picked up the VFC rear stock and am looking at moving the battery to there to allow for different front handguards. I'm not clear on if this is a totally different wiring job on the mosfet, or if they just wire to the front and then do some sort of extended cable run to the back.

 
Hatchet said:
Does anyone (particularly A4 owners) have any photos or links as to how the rear wiring is done? I've just picked up the VFC rear stock and am looking at moving the battery to there to allow for different front handguards. I'm not clear on if this is a totally different wiring job on the mosfet, or if they just wire to the front and then do some sort of extended cable run to the back.
Click to expand...


The cables are slightly longer to come out the back, and there's a little plate that screws on the back to hold the cable. I don't have pics as i convered my A4 to front wired and fitted a folding stock, but might have the plate sonewhere.

How the wiring comes out the mosfet is identical, it just goes whichever direction the battery is. I've had both my SD6 and A4 apart.

 
Picked up the Midwest industries handguard and it looks awesome on the mp5A5 version. But won't fit 1300 nunchuck battery :( I'm on deans as well. So have I just bought an expensive show piece or is there any battery that fits with conversion to deans? I can't find an answer to that.

 
TheMeekon said:
Picked up the Midwest industries handguard and it looks awesome on the mp5A5 version. But won't fit 1300 nunchuck battery :( I'm on deans as well. So have I just bought an expensive show piece or is there any battery that fits with conversion to deans? I can't find an answer to that.
Click to expand...
I don't think that any of the skinny handguards support batteries there is literally no space between them and the outer barrel. It's not a show piece though because you can sell it with some loss obviously. Lots of people are into RS stuff here and it's a drop-in in most cases regarding gbb mp5's.

I bought a cheap clone of that particular handguard and had the same issues. Your best bet is the genuine magpul handguard or if you feel adventurous you could try something like this:
https://www.sixmm.com/en-gb/products/army-force-mp-style-mp5-m-lok-handguard-for-tokyo-marui-mp5-ngrs-gbb-seriesblk.

 

 
Last edited by a moderator:
You must log in or register to reply here.

Similar threads

N
Krytac PDW M MKII - Custom Stock & Drop Stock - Mod
Replies
2
Views
3K
NeonMidnight
N
C-Diddy
Tm 416 Ngrs Changing Stock
Replies
7
Views
3K
AlphaBear
AlphaBear
Ben Savage
MP5 Project Build
Replies
3
Views
2K
PopRocket123
P
1
VFC/Umarex G3 4 years later
Replies
8
Views
6K
1st commando
1
Adolf Hamster
Hamster Buys an Lct, and Isn't Entirely Impressed……
2
Replies
20
Views
5K
Adolf Hamster
Adolf Hamster
Back
Top