• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

TM MP5 NGRS Owners

I put a VFC surefire on mine . It fitted without mod but I chiseled out the two reinforcing ribs inside to allow a bit more space for batteries and wiring 

 
My A4 turned up today.

Interesting (i say the word loosely) The Midwest mlok rail repro rail is a bit lose compared to the A5, probably because there is no wire coming out the front to keep it pushed against the frame. A bit of a bodge will be required with tubing and lekky tape.

 
rj1986 said:
My A4 turned up today.

Interesting (i say the word loosely) The Midwest mlok rail repro rail is a bit lose compared to the A5, probably because there is no wire coming out the front to keep it pushed against the frame. A bit of a bodge will be required with tubing and lekky tape.
Click to expand...
Congrats!

I too got my A4 today. ?
 

———-

edit: A4 is now an SD5. 
 

all Marui haha!

 
Last edited by a moderator:
Group shot of the Marui MP5 NGRS collection. Gots the A4, A5, SD6 and  put together an SD5 (made from a next Gen A4 and SD6). Other Mp5 is kitted out with Magpul stuff. Finally done buying these things. ?

View attachment 122070
 

edit:

vfc flashlight handguard had a slight front/back play which is annoying as the hole for the pin is oblong-ish.

I removed the two strips of plastic to allow for battery space for mounting it on the A5. I cut a small piece from those plastic pieces and glued it at the back of

the rear tab (which hook into the upper receiver). No more front-rear play anymore. No creaking. I now use the stock push pin instead of the locking pin that came with my Magpul SL handguard for the mp5.

 
Last edited by a moderator:
Just checking - all of them (a4/a5/sd6) use 229mm AEG barrels, but AEP rubbers, yeah?

 
For the Mp5sd6 users... what are you using to fit a torch? I have seen the Wii Tech rail which fits onto the suppressor but looking for cheaper alternatives (not keen to have it positioned on the top rail).

Thanks. 

 
Suppressor mount, B&T or LPE.

B&T railed forend for the SD, Wiitech make one, I have one inbound.

Gibbous outfitters do a rather nice mount that goes around the front sight, including a mount for your switches.

 
Last edited by a moderator:
Unless my google-fu has failed the LPE one is discontinued which is irritating given the price and shipping of RS ones from the states and the lack of the old skool surefire ones and the VFC clones thereof.

 
Last edited by a moderator:
Wavey_Gravey said:
Suppressor mount, B&T or LPE.

B&T railed forend for the SD, Wiitech make one, I have one inbound.

Gibbous outfitters do a rather nice mount that goes around the front sight, including a mount for your switches.
Click to expand...
Thanks for the insight. Can I ask where you managed to find the Wii tech handguard? All retailers that I have seen are sold out... 

 
Ok so as you may have seen. Courtesy of Airsoft Competitions i am the proud owner of a brand new tm mp5 sd6 ngrs.

The sadist in me is hoping to run it like a back up/side army to my tm g3 that has been hpa'd and i use primarily as a dmr. I have ordered a knock off of the sas style concealed holster in the hope it will help keep the mp5 out of the way a bit more (will need to rework my entire woodland webbing kit. I think the thigh holster will be too low for use with the sd6 and currently the kydex one is a bit too pricey at £170.

However my main question is regarding mag compatibilty.

Aside from the tm ngrs mags that activate the cut off. What other mags are compatible as i was looking at the ares 95round mid caps or maybe the battleaxe aut winding mag. I know they will take away the empty cut off feature. But has anyone used them in the ngrs mp5's

 
As far as I’m aware there’s no mags other than the TM ones.

Also yes, sadist is the word, the SD is heft to lug around as a backup!

 
Wavey_Gravey said:
As far as I’m aware there’s no mags other than the TM ones.

Also yes, sadist is the word, the SD is heft to lug around as a backup!
Click to expand...
have heard this. Wont know how hefty until the nice man from parcel force delivers it tomorrow.

When you say no mags other than the tm ones are you meaning that work with the cut off. Or full stop. As i can handle the loss of cutoff (he says knowing every mag for his kwa rm4 is a pts one to trigger the cut off)

 
From what I remember the feed lips on the NGRS mp5 mags are in a different place to the feed lips on legacy mp5 mags.

 
cheers guys. Ordered 1 of the 200rd high caps just for now. Will have to order some of the midcaps when im not so poor lol.

 
Shame about the mags. I have one of the newer ICS MP5A5s (CES-P model), with the etu and short stroke trigger and have found it an excellent, high quality gun. Recommend them, and much cheaper than the TM. Saying that, seeing these new TM MP5 has really tempted me to one of their SDs though. However the thought of buying a totally new set of mags when i already have over 10 standard MP5 mags really puts me off sadly. If they made mag converters like they do for their M4 mags, it might tip me over the fence. 

 
You must log in or register to reply here.

Similar threads

N
Krytac PDW M MKII - Custom Stock & Drop Stock - Mod
Replies
2
Views
3K
NeonMidnight
N
C-Diddy
Tm 416 Ngrs Changing Stock
Replies
7
Views
3K
AlphaBear
AlphaBear
Ben Savage
MP5 Project Build
Replies
3
Views
2K
PopRocket123
P
1
VFC/Umarex G3 4 years later
Replies
8
Views
6K
1st commando
1
Adolf Hamster
Hamster Buys an Lct, and Isn't Entirely Impressed……
2
Replies
20
Views
5K
Adolf Hamster
Adolf Hamster
Back
Top