• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

The 'What have you just bought' Thread

You'll have to just launch the entire gat right in to the sea at this point mate, sorry!

 
TheFull9 said:
You'll have to just launch the entire gat right in to the sea at this point mate, sorry!
Click to expand...
Been one of them days and do feel like it , finished a night shift can't sleep over suspected busted ribs .. this arrives go to fit it .. so then decided fit some parts on another 1911 only for the slide lock block screw to cross thread and strip .. time to step away ? 

 
Bit of a splurge this week :). 

Airtac MWS HPA adapter 

Airtac Mag catch in black 

Airtac AT200 Tank, reg and line kit 

PTS EPM1-S x 3

Vortex spitfire hd gen ii

Army armament R604

GothicGhost said:
New handguard to start my MWS PDW build ?

It's really nice quality and comes with different outer barrel lengths plus the nice gas block.
Click to expand...
Where did you get the gas block from I need one for my MWS block 1. 

 
 Headed to a reenactment event last weekend and picked up an original fibreglass heat shield for an M14 (Been looking for one, for years) but sadly no M14 as I broke the Cyma one trying to upgrade it (Oops… may make an appearance as a boneyard project soon ?)

Popped into my local shop yesterday and was informed the G&G M14 could be acquired with some magazines (Regretted selling my veteran but couldn’t get mags at the time) - Collected it from them today and it’s so beautiful ? Sadly plastic stock but it doesn’t feel that bad.

View attachment 134248

 
JinxDuh said:
 Headed to a reenactment event last weekend and picked up an original fibreglass heat shield for an M14 (Been looking for one, for years) but sadly no M14 as I broke the Cyma one trying to upgrade it (Oops… may make an appearance as a boneyard project soon ?)

Popped into my local shop yesterday and was informed the G&G M14 could be acquired with some magazines (Regretted selling my veteran but couldn’t get mags at the time) - Collected it from them today and it’s so beautiful ? Sadly plastic stock but it doesn’t feel that bad.

View attachment 134248
Click to expand...




Nice. M14 for the win.

 
Long story long...

Bought my L85A3 from Extremeairsoft back in Nov/Dec 2022 & within a couple of dozen shots the charging handle fell off (a typical fault apparently), when I went to repair it I noticed a burst thread on one of the dissassembly screws so I summised it was a returned pew then sold to me as new. after emailing extremeairsoft I got zero replies & thought... fuck. determined to fix it I ordered a charging handle set which I 'hoped' would fit (it didn't), earlier this year I ordered a different one (didn't fit), finally emailed Ares direct and ordered the correct one... it came today & WOOHOO, it fits.

For those that need one, this cost £20.10 inc postage from Hong Kong, parts numbers... FC-M3x8 and the UB-478

View attachment 134322

 
Last edited by a moderator:
I don't usually like getting metal slides for my TM pistols because I love how efficient the plastic slides are... but my hi-capa slide snapped at the front when the front sight was ripped out by some very determined brambles that I was wading through (the bottom part of the Worthing Airsoft site is basically unplayable at the moment...)

So my hi-capa now has a metal slide. Surprisingly snappy still on green gas at room temperature thanks to the lightweight blowback unit and probably feels the best to shoot due to the fact it's still snappy but the metal slide has some weight to it; might get a bigger recoil spring, but we'll see. Will be running it on propane anyway, so here's hoping it'll be fine in the winter too.

View attachment 134347

 
Impulse said:
I don't usually like getting metal slides for my TM pistols because I love how efficient the plastic slides are... but my hi-capa slide snapped at the front when the front sight was ripped out by some very determined brambles that I was wading through (the bottom part of the Worthing Airsoft site is basically unplayable at the moment...)

So my hi-capa now has a metal slide. Surprisingly snappy still on green gas at room temperature thanks to the lightweight blowback unit and probably feels the best to shoot due to the fact it's still snappy but the metal slide has some weight to it; might get a bigger recoil spring, but we'll see. Will be running it on propane anyway, so here's hoping it'll be fine in the winter too.

View attachment 134347
Click to expand...
Not normally a fan of 2011s to be honest but this one has tickled my fancy - any clue where you got that supressor from? Looks ace

 
Impulse said:
I don't usually like getting metal slides for my TM pistols because I love how efficient the plastic slides are... but my hi-capa slide snapped at the front when the front sight was ripped out by some very determined brambles that I was wading through (the bottom part of the Worthing Airsoft site is basically unplayable at the moment...)

So my hi-capa now has a metal slide. Surprisingly snappy still on green gas at room temperature thanks to the lightweight blowback unit and probably feels the best to shoot due to the fact it's still snappy but the metal slide has some weight to it; might get a bigger recoil spring, but we'll see. Will be running it on propane anyway, so here's hoping it'll be fine in the winter too.

View attachment 134347
Click to expand...
Gunsmith Bros?

 
pyromancer6 said:
Not normally a fan of 2011s to be honest but this one has tickled my fancy - any clue where you got that supressor from? Looks ace
Click to expand...


It's one of ak2m4's ones. It's out of stock at the moment, but it's really nice:

https://www.ak2m4.co.uk/external-parts/suppressors/xt-suppressor-long-155mm

emilianoksa said:
Gunsmith Bros?
Click to expand...


Yeah. It's the Gunsmith Bros XCarry 5.1 slide. I didn't like a lot of the metal slides because they just looked a bit too... much? I like my simple guns, so all the metal slides with holes all over them and weird geometric patterns... no thank you :D  

 
You must log in or register to reply here.

Similar threads

pyromancer6
The ASG Armalite M15A4 saga
Replies
3
Views
507
pyromancer6
pyromancer6
Beorn
Beginner sling sorrows...
Replies
15
Views
4K
Rogerborg
Rogerborg
andersson
Old original G&G L85a2 - What can be done to it?
Replies
4
Views
585
Anonymoose
Anonymoose
MrTea
'Mk18' style AEG Build
Replies
1
Views
701
Rogerborg
Rogerborg
RostokMcSpoons
JG SA58/LK58 30000 FAL carbine owner's thread
Replies
4
Views
1K
JinxDuh
J
Back
Top