• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

The 'What have you just bought' Thread

Wavey_Gravey said:
That’s not great ☹️ …where you running that on somthing with a little to much pressure or was it totally random?
Click to expand...


I was running it with Vorsk V8.You can just about see the bottle in my pouch. 

View attachment 88251

Got a series of bolt locks during the first game and out of nowhere the gun stopped feeding completely. Cracked her open and the nozzle was completely mangled. 

I was using WE 2X high pressure premium gas previously and I'm certain not even 3000 rounds have been spent since I bought the rif.

This new "reinforced nozzle" doesn't inspire confidence either, feels no different from the stock TM one.

Khyber said:
Think you just had bad luck there. I have been running my MWS on green gas have had around 5000 rounds through it so far and nothing has broke yet. Any way good luck with the new nozzle.

Ran it for the first time with the npas on sunday. Worked a treat. Did you buy one yet?
Click to expand...


I hope so. Nah haven't grabbed an npas yet but it's on my checklist for sure.?

 
I’ve only ran mine on ASG ultra air so far, works like a charm. Even at 1 degree on Sunday it was running pretty well.

 
Wavey_Gravey said:
I’ve only ran mine on ASG ultra air so far, works like a charm. Even at 1 degree on Sunday it was running pretty well.
Click to expand...
A lot of these gas products claim "low - temperature" consistency but the amount of mags exploding in guns I saw on Saturday was hilarious. Miss fires and sluggish cycles galore. Funny thing is when I went to chrono my gun the marshal was like....."oh you're using a GBBR this time huh?" before handing it back to me.

Kevin_in_Sin_City_2005.jpg


(Marshals face)

it's like he could foresee what would happen. Kinda sucks though I'd love to use this GBBR all year around but damn. It wasn't even that cold last Saturday.

 
Last edited:
Mr. No_Face said:
GBB or AEG? ?
Click to expand...
GBB gen 2

3 round burst on a gas blow back is insane, and the build quality of this gun is incredible. I actually prefer it to my MWS, and everyone that I have shown it to, prefers it over the MWS. Yes there is a little stock wobble but this can be remedied by pushing the release lever in the opposite direction.

how reliable is it? Time will tell. @Badabing has some awesome videos detailing this gun on his YouTube channel, for anyone interested check them out.

 
Reap said:
GBB gen 2

3 round burst on a gas blow back is insane, and the build quality of this gun is incredible. I actually prefer it to my MWS, and everyone that I have shown it to, prefers it over the MWS. Yes there is a little stock wobble but this can be remedied by pushing the release lever in the opposite direction.

how reliable is it? Time will tell. @Badabing has some awesome videos detailing this gun on his YouTube channel, for anyone interested check them out.
Click to expand...
It’s genuinely very nice, where did you source it? I’m assuming it’s the new spec VFC with full steel internals?

 
Here ready for a run out this weekend, the Angry Gun suppressor for my TM MP7 GBB. 

This is the dummy version without the tracer unit (I don't plsy CQB or night time so don't see the point) and it seems pretty good. It does have the well known barrel wobb;e, but this isn't as bad as I was anticipating, and a bit of black maskers will fix that anyway.

Usual great service from Fire Support.

View attachment 88339

View attachment 88340

View attachment 88341

 
C-Diddy said:
Here ready for a run out this weekend, the Angry Gun suppressor for my TM MP7 GBB. 

This is the dummy version without the tracer unit (I don't plsy CQB or night time so don't see the point) and it seems pretty good. It does have the well known barrel wobb;e, but this isn't as bad as I was anticipating, and a bit of black maskers will fix that anyway.

Usual great service from Fire Support.

View attachment 88339

View attachment 88340

View attachment 88341
Click to expand...
I have the same on mine , no issues with fitment and a good looking replica too :)

 
Reap said:
GBB gen 2

3 round burst on a gas blow back is insane, and the build quality of this gun is incredible. I actually prefer it to my MWS, and everyone that I have shown it to, prefers it over the MWS. Yes there is a little stock wobble but this can be remedied by pushing the release lever in the opposite direction.

how reliable is it? Time will tell. @Badabing has some awesome videos detailing this gun on his YouTube channel, for anyone interested check them out.
Click to expand...


Nice, Will be looking into this too. ?

Well RA NPAS Kit arrived. Also bought a pair of rare death grip full finger gloves to go with the loadout

View attachment 88499

View attachment 88500

View attachment 88501

 
Mr. No_Face said:
 Well RA NPAS Kit arrived.

View attachment 88499
Click to expand...
Hopefully this will sort your issues you have been having. Start with it fully closed and slowly test increasing the power until you hit the FPS you want. Hopefully this will restrict the power of the higher powered gas to something that wont keep breaking your nozzles.

 
LCT LTS Keymod 13.5

This wasn't supposed to arrive for another week, so I'm very pleased.

Strangely serendipitous as someone is coming to buy my Silverback today.

I'm totally new to the AK platform, but after having had a crack on a few at the battlesim the other week I had to have one.

But I love my tactical bling so I went modern AK.

Unboxing/first impressions video to follow.

View attachment 88515

 
Last edited by a moderator:
I give my guns/projects codenames, and I call my SCAR-H the 'Broadsword' - it is a heavy fucker for sure!

 
You must log in or register to reply here.

Similar threads

pyromancer6
The ASG Armalite M15A4 saga
Replies
3
Views
513
pyromancer6
pyromancer6
Beorn
Beginner sling sorrows...
Replies
15
Views
4K
Rogerborg
Rogerborg
andersson
Old original G&G L85a2 - What can be done to it?
Replies
4
Views
587
Anonymoose
Anonymoose
MrTea
'Mk18' style AEG Build
Replies
1
Views
704
Rogerborg
Rogerborg
RostokMcSpoons
JG SA58/LK58 30000 FAL carbine owner's thread
Replies
4
Views
1K
JinxDuh
J
Back
Top