The 'What have you just bought' Thread

[C-Diddy]

Took me a full 5 seconds to work out what you were on about until I spotted the Haribo. ?

If you don't like the stock, I'll have it off you if you choose to sell it.....?

You never know. Keep your eyes on the ads! Got the airsoft equivalent of ADHD when it comes to gear and loadouts...although I think that's just normal for airsofters isnt it?

 

[Tackle]

Duff sounds like an interesting guy. 

View attachment 70936

I didn't frequent these forums much at the point when things kicked off with him, but I've heard he's quite a character.

 

[Cr0-Magnon]

Very much given up on being 'all in' on sniping, but I wanted to have a cheaper boltie on deck that I don't feel guilty if I don't use it for months... but have it there when the urge comes calling.

I hear ya', I'd rather having a £150 DE Honey Badger sitting unused as a spare than a £1200 on Marui NGR's.

 

[alxndrhll]

I hear ya', I'd rather having a £150 DE Honey Badger sitting unused as a spare than a £1200 on Marui NGR's.

Aye, more than happy to throw a decent chunk of change at my RIFs which see regular use. But having that much cash sunk into an SRS just left me feeling like I had to use it as much as possible, something made significantly harder by the fact there is a limited number of woodland sites that I'd consider local... some of which are only open half the year. Once I've got my ZenitCo'd up AK74SU sorted I dare say I'm done with buying anything RIF wise for the foreseeable future, words I'm sure I'll live to regret but very much content for the time being.

 

[Adolf Hamster]

on the subject of zenitco'd aksu's

grabbed a combat union hop and flash hider for my latest acquisition.

 

[PopRocket123]

Aye, more than happy to throw a decent chunk of change at my RIFs which see regular use. But having that much cash sunk into an SRS just left me feeling like I had to use it as much as possible, something made significantly harder by the fact there is a limited number of woodland sites that I'd consider local... some of which are only open half the year. Once I've got my ZenitCo'd up AK74SU sorted I dare say I'm done with buying anything RIF wise for the foreseeable future, words I'm sure I'll live to regret but very much content for the time being.

I'm can't afford any more rods for a long time, however I have a bunch of spare parts and access to a 3d printer so I've resolved to make as many custom AEGs as possible. 

 

[Spartan09]

Just bought 6 PTS EPM1 midcap mags to replace my hi caps for ise on both my nuprol m4 and tippmann m4 in HPA configuration...    (6x250rd midcaps vs 4 300rd hicaps plus no battle rattle)

Plus 2 p90 hi cap mags. All from patrolbase

Also, if i can afford it (doubtful), i am going to buy an m320 to replace my m203, mainly for looks, but also because the 320 has sights i can use with tag rounds =P

 

[Keithlag]

Just got this cyma ak47s

View attachment 70954

 

[Dracon]

My new ghk urgi first from new gbb.

Looking forward to sites opening to get it going

View attachment 70965

 

[Cyberlawyer]

Just took delivery of a custom kydex holster with L2 retention for my FNX 45. It’s fitted on a safariland qls fork so I can quickly swap it out on my belt.

View attachment 70973

View attachment 70974

 

[Druid799]

A pink Bizon ! Was going to strip the pink and repaint but once No2 son saw it he said “like f*ck you are ! We’re doing a theme on that to freak out all the Russian kit geardo’s !” I love my son ! ?????

PS the seller on these very forum @VonGrimmeven chucked in a free silver PBS suppressor with it and I have to say the quality of his 3D printing skills are amazing ! 

View attachment 70995

 

[paradoxum]

https://www.egtactical.com/red-dot/277-423-a-aevolutiongear-2020ver-exps3-0-sight-mil-spec-marking.html#/41-color-fde

https://www.egtactical.com/magnifier/342-618-g43.html#/41-color-fde

Gonna make a review of them both since I can't find any, wanna try this 2020ver EXPS before I drop money on a real one.

 

[Druid799]

I hear ya', I'd rather having a £150 DE Honey Badger sitting unused as a spare than a £1200 on Marui NGR's.

BUT playing devils advocate the good thing with having the TM recoil sat in a cupboard unused for mths and mths is when you do finally pick it up again you 100% know it’s going to work just as perfectly as when you bought it , whereas with the cheap gun the gods of airsoft will cast there bones of good and bad luck to decide wether it’ll still work just to feck with you ? ?

 

[Cr0-Magnon]

BUT playing devils advocate the good thing with having the TM recoil sat in a cupboard unused for mths and mths is when you do finally pick it up again you 100% know it’s going to work just as perfectly as when you bought it , whereas with the cheap gun the gods of airsoft will cast there bones of good and bad luck to decide wether it’ll still work just to feck with you ? ?

I would disagree with that. Fancy gun = fancy problems.

 

[C-Diddy]

https://www.egtactical.com/red-dot/277-423-a-aevolutiongear-2020ver-exps3-0-sight-mil-spec-marking.html#/41-color-fde

https://www.egtactical.com/magnifier/342-618-g43.html#/41-color-fde





Gonna make a review of them both since I can't find any, wanna try this 2020ver EXPS before I drop money on a real one.

I recently picked up these from Real Airsoft UK on eBay:View attachment 70998

For clones they're pretty good. Only issue i have is, to get the correct eye relief on the G43 I've had to remove the rear iron sight. the G33 may have been a better option for me. Package had the 558, G43, batteries, Scopecoat, EoTech stickers and a really solid storage box.

View attachment 70999

 

[alxndrhll]

I would disagree with that. Fancy gun = fancy problems.

Eh, I'm assuming the initial sentiment from @Druid799 was more aimed toward a TM NGRS rather than a Prommy NGRS. The biggest element of the equation being QC (whether it's a stock RIF or one with aftermarket bits in it), generally speaking experience would tell me TM QC is superior to mostly everyone elses so assuming you're running it with the recommended amount of juice and the like I think I agree with the initial statement... but as with anything airsoft there is a healthy degree of luck in there either way. I'm very much out of the loop on AEG things but I'd assume the main things that would die while an AEG is in storage would be electronics (lingering moisture) and o-rings (drying out)?

 

[Druid799]

I would disagree with that. Fancy gun = fancy problems.

And I would disagree with your disagreement ? (@alxndrhll is spot on hadn’t picked up your on about ‘upgraded’ TM’s due to the wording?)I have 7 TM recoils all are totally stock Bar deans adapters and there all functioning fine and the oldest will be 14yr old this yr and 2nd will be 12yr old and all the rest fit in between those ages and 3yrs for the youngest . The oldest will some times not be touched for over a year due to its specific set up(the others can run for mths and mths with out use) but pick it up stick a battery in it and it runs fine . Yet a Dboys SR I bought for a movie themed loadout was used for a couple of mths then left for 6 or 7mths ? And on trying it to sell it was totally locked and the same thing happened to an army armourment SA80 I had , left for near a year wouldn’t work when tried . ?

 

[Ad_]

I would disagree with that. Fancy gun = fancy problems.

In my experience the cheap pot metal has a tendency to become brittle over time (and in some cases expand & cause lockups). I bought some Chinese guns pre-VCRA and while they were all fine to begin with they all suffered from this issue over time and needed replacement parts after a few years or so regardless of use.

OTOH all of the Tokyo Marui guns I have from that time are still fine, with the oldest being close to 20 years old now.

 

[hitmanNo2]

Same.  I had the rail on a plastic bodied M4 warp with enough power to snap at the retaining screw and curl up like a Quaver.  Just sitting in storage.  Warped CYMA Thompson receiver, weakened Galaxy MP5K mag release.  Bloody monkey metal.

I've had no issues with TM or WA stuff though.

 

[Cr0-Magnon]

Eh, I'm assuming the initial sentiment from @Druid799 was more aimed toward a TM NGRS rather than a Prommy NGRS.

Fair enough, guess my mind just immediately thought of a Gate Titan etc. In all my years playing airsoft, I think I've only ever come across one stock NGRS and one stock VSR.