• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

The 'What have you just bought' Thread

rocketdogbert said:
Is your battery OK? Sounds like the circuit/battery protection is kicking in
Click to expand...
Yep or the mechbox is locking up/broken. But most likely electrical if it cycles once.

Musica said:
My imax charges both of them without issue not sure of any other way to test them. Been at a storage charge since the day I got them until now.
Click to expand...
If there was any problems with your batteries the imax would show a fault. You do balance charge them not fast charge I take it?

 
Last edited by a moderator:
Urgh that sounds so frustrating. Hope they get it sorted quick for you if you send it back.

 
Arwen said:
Urgh that sounds so frustrating. Hope they get it sorted quick for you if you send it back.
Click to expand...


Seems like the problem is mechanical so I have emailed the retailer (jdairsoft). I hope so too I booked a game for the 14th as bring my own kit. It's literally my worst case scenario. 

Heres a video of the horrific noise it makes when I get to fire it after inserting a battery. 

View attachment 44234

 
Last edited by a moderator:
rocketdogbert said:
4x32 Scope with digital rangefinder, accurate to 500m in 0.5m increments
Click to expand...


Can you switch it between regular metres and airsoft metres?

Musica said:
fires once after connecting battery then 2 beeps and a red light in mag well
Click to expand...


NOOOOOOOOOOOOoooooooooooooooo!  Aw, that's awful, you buy an EVO to avoid that sort of tosh. :(

You might try asking Ryan / Silver Fox if he's got any ideas.  Worst case,  I should have a spare something or other on the 14th.

 
Last edited by a moderator:
As advised in the Evo Owner's Group, contact JD today. They'll replace it or repair it under warranty. Just make sure that you were using the recommended power of battery, or it could invalidate your warranty. Almost every Evo suffers from weak gears, but once upgraded, they're fantastic and reliable. My gen.1 first batch Evo shat its gearbox a few months into ownership. I had it repaired by Landwarrior, but paid to have it upgraded at the same time and I've had no issues with it since and that was years ago. Best AEG I've ever owned in 10 years, Marui's included.

 
Rogerborg said:
Can you switch it between regular metres and airsoft metres?

NOOOOOOOOOOOOoooooooooooooooo!  Aw, that's awful, you buy an EVO to avoid that sort of tosh. :(

You might try asking Ryan / Silver Fox if he's got any ideas.  Worst case,  I should have a spare something or other on the 14th.
Click to expand...


Yea I can't believe how stupid I was to book the 14th as I had this in the back of my head.

ryaw said:
As advised in the Evo Owner's Group, contact JD today. They'll replace it or repair it under warranty. Just make sure that you were using the recommended power of battery, or it could invalidate your warranty. Almost every Evo suffers from weak gears, but once upgraded, they're fantastic and reliable. My gen.1 first batch Evo shat its gearbox a few months into ownership. I had it repaired by Landwarrior, but paid to have it upgraded at the same time and I've had no issues with it since and that was years ago. Best AEG I've ever owned in 10 years, Marui's included.
Click to expand...


Yea I was hoping it was anything but the gears.  I put the mil spec spring and ball bearing spring guide in and ran it on 11.1v only so that's not an issue as thats what is required. It does say it recommends minimum weight of 0.25g  but it has the same issue dry firing as well as with my asg blaster 0.20gs.  Was it just ultimate gears you had added? 

Check out the box it arrived in 

View attachment 44242

 
Last edited by a moderator:
Musica said:
Yea I can't believe how stupid I was to book the 14th as I had this in the back of my head.

Yea I was hoping it was anything but the gears.  I put the mil spec spring and ball bearing spring guide in and ran it on 11.1v only so that's not an issue as thats what is required. It does say it recommends minimum weight of 0.25g  but it has the same issue dry firing as well as with my asg blaster 0.20gs.  Was it just ultimate gears you had added? 

Check out the box it arrived in 
Click to expand...
BB weight wont be an issue.

It sounds like it is trying to burst fire on semi?

This has become the problem with the evo that there are too many bad ones creeping through. I know of lots that have worked fine with never an issue but far too many do. Which is a shame as they are great when working.

As for fine when the gears are upgraded that is a joke on a £300+ gun. Ultimate gears are crap though so not much of an upgrade. I would insist on a replacement and if that dies get a refund and buy something you can trust.

 
I honestly can't recall what gears were put in mine, but probably steel Ultimates. I'd personally advise that you get it upgraded and stick with it. It'll be the only AEG you'll ever need and it's certainly the only one I've had for years now. Excellent indoors and out.

 
ImTriggerHappy said:
As for fine when the gears are upgraded that is a joke on a £300+ gun. Ultimate gears are crap though so not much of an upgrade. I would insist on a replacement and if that dies get a refund and buy something you can trust.
Click to expand...


ryaw said:
I honestly can't recall what gears were put in mine, but probably steel Ultimates. I'd personally advise that you get it upgraded and stick with it. It'll be the only AEG you'll ever need and it's certainly the only one I've had for years now. Excellent indoors and out.
Click to expand...


I agree with both points it's a bit of a joke for such an expensive gun but piece of mind would do me wonders and I am pretty picky about guns. I like stop on empty and SMGs so I don't have a huge choice to pick from. If I can work out some discount I might go for a set of decent gears in there as I have done a lot of reading before buying it and this is the only fault people mention that really lets it down. 

The retailer have said they will email me a label and arrange collection so far. Will do a full review on the appropriate thread when I get to the end of the line with the retailer as they have been speedy and informative responses so far. 

 
ryaw said:
I honestly can't recall what gears were put in mine, but probably steel Ultimates. I'd personally advise that you get it upgraded and stick with it. It'll be the only AEG you'll ever need and it's certainly the only one I've had for years now. Excellent indoors and out.
Click to expand...
It is not an upgrade though if it is something that is required to fix an inherent flaw. If there is a problem with the manufacturing that means the Evo has a high rate of gear failure then ASG should be replacing the weak area for free as the original product is not fit for purpose.

No one should have to spend more money just to make their gun work the same as it is meant to originally.

 
Bunch of parts from @ak2m4

These are for my MG36 build. Where there is a X2, means one of them is going to my ARX160 which already has upgrade parts ready to go in, just need the last pieces of the puzzle. 

SHS (RA) G36 Cylinder Head Aluminium

Acetech AceMOS Plus Mosfet X2

SLD High Torque Motor 22TPA (Short)

SHS (RA) Stainless steel Cylinder (4/5Hole) X2

ZCI Piston head (8 Vent Aluminium)

SLD 14 Tooth Piston (Lightweight)

ZCI Gear Set (Advanced) 16:1

 
You must log in or register to reply here.

Similar threads

pyromancer6
The ASG Armalite M15A4 saga
Replies
3
Views
513
pyromancer6
pyromancer6
Beorn
Beginner sling sorrows...
Replies
15
Views
4K
Rogerborg
Rogerborg
andersson
Old original G&G L85a2 - What can be done to it?
Replies
4
Views
587
Anonymoose
Anonymoose
MrTea
'Mk18' style AEG Build
Replies
1
Views
704
Rogerborg
Rogerborg
RostokMcSpoons
JG SA58/LK58 30000 FAL carbine owner's thread
Replies
4
Views
1K
JinxDuh
J
Back
Top