• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

The 'What have you just bought' Thread

Oh right, I get you. Can you tell me how long it is from one end of the pad to the other then, please.

Yeah, I've got 3 single XML T-6 LED torches: 1 is dodgy, 2 are great, so I spose i'll go with Meatloaf on that :lol:

I'm hoping for 'kin ridiculous from this new'un tho!

Edit: actually I've just remembered I have 4 - so 3 out of 4 beats Meatloaf :lol:

 
Last edited by a moderator:
Just got my guarder sp120 spring ready for my mp5k rebuild only a lonex a2 motor to get

 
Ian_Gere said:
Oh right, I get you. Can you tell me how long it is from one end of the pad to the other then, please.

Yeah, I've got 3 single XML T-6 LED torches: 1 is dodgy, 2 are great, so I spose i'll go with Meatloaf on that :lol:

I'm hoping for 'kin ridiculous from this new'un tho!

Edit: actually I've just remembered I have 4 - so 3 out of 4 beats Meatloaf :lol:
Click to expand...
It's 34" long and 6" wide around the back. I just looked at the website and I think I got the last one, they're out of stock.

 
Ian_Gere said:
Oh right, I get you. Can you tell me how long it is from one end of the pad to the other then, please.

Yeah, I've got 3 single XML T-6 LED torches: 1 is dodgy, 2 are great, so I spose i'll go with Meatloaf on that :lol:

I'm hoping for 'kin ridiculous from this new'un tho!

Edit: actually I've just remembered I have 4 - so 3 out of 4 beats Meatloaf :lol:
Click to expand...
How bright are the good ones? I'm using a small 1600lm ultrafire. It's a good light but I don't think its 1600lms.

 
Yeah, they used to offer cashback through topcashback too, but no more. I think my best bet might be to get some MTP ripstop nylon or something similarly lightweight and make a cover for my proper back support. I'll be able to do a few different covers. It's just getting round to it :lol:

 
This is a single 18650 battery one vs a dual 18650:

u0mk.jpg
sj2s.jpg
​
In the outdoor one, the ambient light has made my phone camera screw up the contrast - the porch lamp across the road isn't really as bright as it seems, the brighter torch can easily light up the wall next to that lamp, but my phone can't see it :lol:

I was surprised to learn a few months ago that there is no accepted standard way of measuring lumen output, but what I also found out is that 1600 is what a single XML T6 is capable of, according to the manufacturer, not what the torches kick out. I forget the deets now, but I'm pretty sure the voltage wasn't the same as used in these torches anyway...

 
Ian_Gere said:
This is a single 18650 battery one vs a dual 18650:

In the outdoor one, the ambient light has made my phone camera screw up the contrast - the porch lamp across the road isn't really as bright as it seems, the brighter torch can easily light up the wall next to that lamp, but my phone can't see it :lol:

I was surprised to learn a few months ago that there is no accepted standard way of measuring lumen output, but what I also found out is that 1600 is what a single XML T6 is capable of, according to the manufacturer, not what the torches kick out. I forget the deets now, but I'm pretty sure the voltage wasn't the same as used in these torches anyway...
Click to expand...
I have a single and a dual one. The dual one is rated 1800lm and the single is 1600lm. I really like the output of the dual but that's the faulty one. Don't suppose you have an extra one? I know they're cheap from china but they take so long to arrive!

I thought when the police test out the tint in car windows the machine they use measures lumens?

 
Yeah, I think that's right, but I spose their method uses pre-calibrated gear. The thing with commercially available LED's is that there is no standard distance of meter from light source, nor surroundings/reflectors, etc. so while we can reasonably hope that the figures for the products of a given manufacturer should be be consistent with each other, once it comes to various Chinese factories putting LED's in torches, even if the figures they were quoting were the output from the torch, rather than the potential of the LED, we could hardly trust them anyway. It's not just Chinese manufacturers though - that was my main point really: there is no internationally recognised standard for any manufacturer to adhere to so they just make up their own tests.

 
Ian_Gere said:
Yeah, they used to offer cashback through topcashback too, but no more. I think my best bet might be to get some MTP ripstop nylon or something similarly lightweight and make a cover for my proper back support. I'll be able to do a few different covers. It's just getting round to it :lol:
Click to expand...
It's a MTP battle belt for use with the Osprey Ian, they go for around £20 on ebay, I just had a quick look for you and they come in a few different sizes aswell. Could save you the hassle mate!

 
Cheers Ted. Cheeky, could you measure the width of the bit that the belt goes through, please? Maybe i can just slide my back protector through one.

You could buy my dodgy double battery one off me cheap. It works fine on full power, but the other modes don't work.

 
It's made for a 55mm belt to go through. How wide is your back protector? I'm at work today so will have to check later.

 
Couldn't find a tmc one in stock so got the flyye LT6094 instead



 
You mean like this?

fldmp3nx500b.jpg
odwwb2ux500a.jpg
It looks to me as if the vest will take 2 pouches on either side horizontally.

 
Wrong thread, Ian :)

Maybe that's the case- it'd behave a lot more like a standard US LBV in that way as all the pouches on those are at angles to the rest of the rig. If you didn't like it you could always put more grommets in.

But if the pouches did mount onto that LBV horizontally, where would the locking plate* go through to get to the studs?

I'm guessing that *bellend-shaped metal part at the bottom bends round to lock onto the bottom 2 studs- you'd have to put cuts through the cordura holding the grommets to actually mount the pouches.

 
Ian_Gere said:
Really? Not like any I've seen...
Click to expand...
:lol: Weeelll... it was easier to describe them that way than,"stereotypical bone shaped end with 2 oval slots on either side which have a larger diameter at the bottom than they do at the top." :D

 
TacMaster said:
:lol: Weeelll... it was easier to describe them that way than,"stereotypical bone shaped end with 2 oval slots on either side which have a larger diameter at the bottom than they do at the top." :D
Click to expand...
Nah, now you're just making excuses. Go see the doctor, mate. You know it makes sense :lol:

 
You must log in or register to reply here.

Similar threads

pyromancer6
The ASG Armalite M15A4 saga
Replies
3
Views
528
pyromancer6
pyromancer6
Beorn
Beginner sling sorrows...
Replies
15
Views
4K
Rogerborg
Rogerborg
andersson
Old original G&G L85a2 - What can be done to it?
Replies
4
Views
607
Anonymoose
Anonymoose
MrTea
'Mk18' style AEG Build
Replies
1
Views
714
Rogerborg
Rogerborg
RostokMcSpoons
JG SA58/LK58 30000 FAL carbine owner's thread
Replies
4
Views
1K
JinxDuh
J
Back
Top