• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

The 'What have you just bought' Thread

Maple leaf whisper supressor with extra baffle inserts. 

Had a whale of a time rocking my g3 this weekend just gone and wanted to turn the already quiet sound of it into almost silent.

 
I used the smoke silencer in anger today and had a blast. I really need to sort out a tracer as well as at one point I was in a dark corridor in a prison and firing semi with no idea if my BB's were hitting the target because of all the smoke and flash (this was a whole lot of fun and no I wasn't blind firing, I'd put the red dot on the target and fires a couple of BB's but fook knows if my BB's went on target as I couldn't see a thing because of the smoke and flash effect).

Oh and I seem to have ended up with a Spectna Arms Mk18 with the Gate mosfet fitted.

 
Not quite what have I just bought but its all been in the last few days. 

Valken Kilo RIF. Used

SkyRC S65 Balance charger. New

Dean to XT60 adapters. New

6000 x Nuprol RZR BBs. New (lol)

Nuprol Large wheeled hard case. Used

Bolle Tracker 2 eye pro. New

DeltaMike Mini. New

Feeling good with myself.

 
@Herrgh   Get lots of those batteries, I seem to go through them way too fast.  I'm not sure if the Sotac has an auto-off feature - if it doesn't, my experience says it's too easy to leave a sight left switched on, and the battery is dead within a week!

My recent purchases...  already mentioned elsewhere, but well feck it ;)

Double Eagle M904G from the classifieds... thanks @Speedbird_666, the gnu came in beautiful condition - it gave me that New Gnu unboxing buzz when I got it, very enjoyable :)

Double Eagle Falcon control unit - thanks @JVacation, allowed me to swap the newer, shimmed and lubed gearbox from the 904 to my 906, and end up with two working toys rather than one!  

As I'm now in possession of a 906 and a 904, I'll probably run up a quick comparison (perhaps with video) of the two gats, which might be useful for future DE purchasers.

 
RostokMcSpoons said:
I'm not sure if the Sotac has an auto-off feature
Click to expand...
It doesn't. At least, i've never found mine turned off between games but my Holy Warrior must have narcolepsy because within 30 seconds of having my rifle hanging then bringing up to aim it's already off and i've got to use my clumsy big gloved finger to try and press the brightness to turn it back on. Annoying when you aim at someone and there's just empty glass framing them.

That said, the first thing I do at the end of every session is remove batteries from everything.

 
Last edited by a moderator:
MrTea said:
Annoying when you aim at someone and there's just empty glass framing them
Click to expand...


... probably makes you about 5% less accurate than if it was switched on ;)   But yeah, auto-off would be almost as annoying as the battery being dead.

 
RostokMcSpoons said:
@Herrgh   Get lots of those batteries, I seem to go through them way too fast.  I'm not sure if the Sotac has an auto-off feature - if it doesn't, my experience says it's too easy to leave a sight left switched on, and the battery is dead within a week!
Click to expand...


I planned ahead! Got me some rechargeable CR123As. Sick of having a red dot that only takes a weird uncommon button battery I can only get from Halfords (or online). Gonna throw it up on the Classifieds in a moment.

Really enjoying the M906C itself so far. Just the receiver alone is a treat, compared to the 10 year old G&P AR15 receivers I'm used to:

- Ambi controls!

- Functional dust cover!

- Functional bolt hold-open! (VERY bloody useful.)

- QD Spring (admittedly more to do with the gearbox but still)

- QD sling attachment points built in!

And it's quite replica-ish in looks instead of being a horrible non-replica skeletonised sportsball/speedsoft affair that the likes of G&G have focused on over the last few year. It'll serve me well until my main AEG is back from being subject to the "Trigger's Broom" protocol.

 
Herrgh said:
Really enjoying the M906C itself so far. Just the receiver alone is a treat, compared to the 10 year old G&P AR15 receivers I'm used to:

- Ambi controls!

- Functional dust cover!

- Functional bolt hold-open! (VERY bloody useful.)

- QD Spring (admittedly more to do with the gearbox but still)

- QD sling attachment points built in!

And it's quite replica-ish in looks instead of being a horrible non-replica skeletonised sportsball/speedsoft affair that the likes of G&G have focused on over the last few year. It'll serve me well until my main AEG is back from being subject to the "Trigger's Broom" protocol.
Click to expand...


Yes, without wishing to bolster everyone's opinion that I'm on commission from Double Eagle (because I've recommended the 906 willy-nilly), it's great isn't it?  :D

I would say have some caution with using the QD sling points on the hand guard... my (probably too cheap) sling swivel only fits poorly in those and a good bump to the gun or a yank of the sling and it's out.  (I attached an offset sling hook to the top RIS rail instead)   

The ones on the receiver itself are absolutely fine though. 

The ambi controls and the mag catch made for a few fun-and-games when I first took the thing apart and then tried to re-assemble it, but it's nicely put together and the gearbox (specifically the trigger) is much easier to deal with than the mechanical V3 thing in my F2000 and AK47.   The good news is - you shouldn't need to pull it apart for a good long while.

 
Last edited by a moderator:
Bought this M4 from here a wee while ago, wanted to set it up as an M4A1 clone using an Acog, PEQ & fore grip I had in my spares box, got the wasdn, butt stock & RIS rail from ebay & amazon. Quite happy with it (except from the sticker on the mag well).

Go this E&l akakm essential to replace the plastic one's I got before my UKARA kicked in. Wasn't easy finding a battery to fit it tho but the one in the pic is perfect.

Taken a fancy to some Flecktarn Field Gear, time will tell if the webbing belt fits round my ample gut (pics to follow).

View attachment 115476

View attachment 115477

 
Last edited by a moderator:
A MK18 upper for the MWS, decked out the same as my MK16…thing is chonk, why do people buy these?! ?

 
Got myself some West German field gear, G36 pouches fitted for now but some G3 pouches are on their way.

It's a bit tight on me (must have shrunk in the wash) but should be easy to get altered so I have room to breath or even move.

Feel the need for either another water bottle pouch or 2, and possibly an e-tool pouch, there doesn't seem to be a huge selection of pouches available for this or info about them, a couple of yt vids is pretty much all I could find. If anyone has more info about this PLCE please let me know.

View attachment 115581

View attachment 115582

View attachment 115583

 
C-Diddy said:
View attachment 115857

Not wanting to hijack @SSPKalistatus update any more, time to be more adventurous with fuel for the MWS. 

For anyone interested, this is the temp chart from the can, giving approx psi output against temperatures

View attachment 115858
Click to expand...
A simple idea and very helpful to the user

I wonder if others will follow?

Definately my next gas purchase, as been through the brands and now I only use Ultrair ?

 
You must log in or register to reply here.

Similar threads

pyromancer6
The ASG Armalite M15A4 saga
Replies
3
Views
506
pyromancer6
pyromancer6
Beorn
Beginner sling sorrows...
Replies
15
Views
4K
Rogerborg
Rogerborg
andersson
Old original G&G L85a2 - What can be done to it?
Replies
4
Views
583
Anonymoose
Anonymoose
MrTea
'Mk18' style AEG Build
Replies
1
Views
699
Rogerborg
Rogerborg
RostokMcSpoons
JG SA58/LK58 30000 FAL carbine owner's thread
Replies
4
Views
1K
JinxDuh
J
Back
Top