The GBBR Thread

[Mr Monkey Nuts]

4 mags seem to be the magic number, as that's also what I run quite comfortably.

Plus if you do run out you get to use your side arm more, which often gets neglected when spamming Hicaps

 

[airsoftwarrior147]

Funny thing is I don't carry a side arm anymore as it weighs my legs down and I can't get it out of a holster without it being on secured by my pc

 

[jcheeseright]

put it on your belt instead, leg rigs are awful.

 

[airsoftwarrior147]

At the moment I run a battle belt, but that's set up with my 417 gear so there's not much space, also I have no molle holster adaptor

 

[airsoftwarrior147]

Also what weight bbs do people use, as i usually run with .25 but am thinking of trying some .28 or heavier

 

[dapprman]

I run 0.30g normally, or 0.25 tracer for indoors.

 

[cavninja]

At the moment I run a battle belt, but that's set up with my 417 gear so there's not much space, also I have no molle holster adaptor

Sounds like someone needs to go shopping??!! Yaaaaaaaaayyyy!!!!

 

[airsoftwarrior147]

Shopping, the battle belts 3 weeks old and cost £200 for the set up, the 17 was £600+mags etc

And I've just brought a we 416 for £200 plus £200 ish on 6 extra mags.

I may try to get it onto my PC but that will restrict the number of mad I can use, also In all honesty I don't use the pistol much anyway

 

[cavninja]

Shopping, the battle belts 3 weeks old and cost £200 for the set up, the 17 was £600+mags etc

And I've just brought a we 416 for £200 plus £200 ish on 6 extra mags.

I may try to get it onto my PC but that will restrict the number of mad I can use, also In all honesty I don't use the pistol much anyway

Shopping? isn't that what we do inbetween airsofting??!!

I've got a WE 416, it's awesome!

I found that to make my side arms accessable with a PC I use the IMI low rise tactical belt adaptor:

http://full-ops.com/index.php/equipment-tactique/holstres/imi-low-ride-belt-loop.html

You can also fit the holster on to a paddle type fitting, or a molle adaptor, it works for what ever you want to run!

 

[airsoftwarrior147]

Also sorry for the abundance of questions but what has do people use, I'm going I get some as an emergency thing so I can get some propane at a later date, but which I has do you use and is we nurpol 2.0 decent. Also where's the best place to buy propane and silicon oil plus a propane adaptor

 

[airsoftwarrior147]

Fair enought I might try a low ride belt loop and slot it onto the belt I run though my battle belt, but I'd have to get a holster for my bulldog or do they fit in px4 holsters?

 

[M_P]

Also sorry for the abundance of questions but what has do people use, I'm going I get some as an emergency thing so I can get some propane at a later date, but which I has do you use and is we nurpol 2.0 decent. Also where's the best place to buy propane and silicon oil plus a propane adaptor

The nuprol stuff does the job, just green gas at the end of the day, don't let the fancy cans fool you into thinking otherwise. I've got a few cans of it and it'll sort you till you get propane etc.

Go outdoors is pretty cheap for propane, especially if you have their discount card thing.

 

[airsoftwarrior147]

Nice I think I have one some where, it's just trying to find the adaptor and silicon oil before sunday

 

[TheGrover]

does anyone know a good T1 dot sight replica suitable for use on a GBB? someone earlier mentioned the Swiss arms replica but i want a replica that has a high mount so i dont need to faff around with a riser.

Thanks

 

[M_P]

does anyone know a good T1 dot sight replica suitable for use on a GBB? someone earlier mentioned the Swiss arms replica but i want a replica that has a high mount so i dont need to faff around with a riser.

Thanks

I think primary arms will probably do something, they're low end real steel so shouldn't break due to the kick.

 

[TheGrover]

I think primary arms will probably do something, they're low end real steel so shouldn't break due to the kick.

cant seem to find any in the UK, and a post on another forum mentions that they only ship to the US

 

[dapprman]

Might be worth looking at Vector Optics (another low end real steel) - they do sell in the UK via Amazon - not sure if they do a T1 clone though.

 

[jcheeseright]

Dytac ones are pretty hardwearing, I've had one on my MP7 GBB for nearly 2 years now and it's still working.

 

[cavninja]

Fair enought I might try a low ride belt loop and slot it onto the belt I run though my battle belt, but I'd have to get a holster for my bulldog or do they fit in px4 holsters?

The holsters attach via an allen screw, obviously IMI holsters fit, not sure on other brands, IMI do a holster for pretty much all the main modern hand guns, they're real steal holsters and ancils, I've seen them used by many police forces in various parts of the world.

 

[straffham]

Might be worth looking at Vector Optics (another low end real steel) - they do sell in the UK via Amazon - not sure if they do a T1 clone though.

Cheers for that link, ordered myself a Condor 2x42 for a DMR project.