• 2FA temporarily disabled, emails not working

    Two factor authentication (for most of you 'email a code') has been temporarily disabled while we figure out why emails are not being received by large numbers of users. Emails are not sending site-wide. Please continue to use AF-UK as normal but note that you may be asked to log back in once this is re-enabled.

Sig 320 X Carry

novioman

Members
Joined
May 12, 2012
Messages
1,024
Reaction score
394
Just bought one of the VFC made Sig 320 x carry.

Nice pistol, one concern if you put a gassed up mag in the pistol when the gun hasn’t been cocked the mag valve is obviously making contact with the valve knocker as the pistol firers, not powerfully, but another for the slide to move forward and back very quickly, just like when you lower the hammer on a gassed up mag.

Cant find out if this is a faulty pistol or just how this one is designed.

 
Just bought one of the VFC made Sig 320 x carry.

Nice pistol, one concern if you put a gassed up mag in the pistol when the gun hasn’t been cocked the mag valve is obviously making contact with the valve knocker as the pistol firers, not powerfully, but another for the slide to move forward and back very quickly, just like when you lower the hammer on a gassed up mag.

Cant find out if this is a faulty pistol or just how this one is designed.
I can't understand the message here.

 
It's a common fault with the VFC Sigs - the springs & valves are too strong and need replacing immediately as the pistol is designed to run on the CO2 mags, so it just causes light striking on green gas ones.

 
Last edited by a moderator:
It's a common fault with the VFC Sigs - the springs & valves are too strong and need replacing immediately as the pistol is designed to run on the CO2 mags, so it just causes light striking on green gas ones.
Thanks for that, I didn’t know about this issue.

 
Just bought one of the VFC made Sig 320 x carry.

Nice pistol, one concern if you put a gassed up mag in the pistol when the gun hasn’t been cocked the mag valve is obviously making contact with the valve knocker as the pistol firers, not powerfully, but another for the slide to move forward and back very quickly, just like when you lower the hammer on a gassed up mag.

Cant find out if this is a faulty pistol or just how this one is designed.
Check the strike valve on the magazine with a valve tool, i find some are not fully screwed in 

 
Back
Top