Quick Questions & Simple Answers.

Burny said:
Thanks for the reply, I guess what's confusing me is that when connected the wires no longer match:

View attachment 43520

That's battery on the left charger on the right. Is this normal?

Thanks
Click to expand...
Click to shrink...
That would concern me yeah, looks like the charger is the wrong way round, a lot of rc stuff uses the plugs that was so it'll need swapping over so the wires match

 
Valentine said:
That would concern me yeah, looks like the charger is the wrong way round, a lot of rc stuff uses the plugs that was so it'll need swapping over so the wires match
Click to expand...
Click to shrink...
Yeah. I think I'll start a dedicated thread so as to not clog up the quick question thread. This is all new to me and this smart charger is like something out of apollo 13. Thanks for the help.

 
Round is red normally. There was one brand many years ago who put them on as on your photo, but the standard in airsoft is red is the round one.

Switch to deans or XT60.

 
Nuprol 2.0 or 3.0 gas in a WE Glock at 11 degrees celsius.

Can I get away with the green or will I need the red to empty a magazine?

 
FreeFrag.UK said:
Currently suffering a brain fart, is it recommended to clean & lubricate a pistol (in this case a TM) prior to first use?

I feel a bit embarrassed asking but I figure better a bit of embarrassment than destroying my new pistol. Been a long day and the old brain tissue isn't working.
Click to expand...
Click to shrink...
Yes. When I first bought my TM Strike Warrior it wouldn't fully cycle as the slide had zero lube. Lube the slide and then use it til it breaks. 

 
Am I correct thinking that all single stack, slim 1911 mags are prettyuch the same? Need some new ones for a src 1911 meu but the we mags are half the price so would rather grab a couple of those if they'll definitely work

 
Valentine said:
Am I correct thinking that all single stack, slim 1911 mags are prettyuch the same? Need some new ones for a src 1911 meu but the we mags are half the price so would rather grab a couple of those if they'll definitely work
Click to expand...
Click to shrink...
Short answer they should be. long answer though the src is meant to be a tokyo marui clone like the WE construction tolerances maybe off and the mags might no perform properly. Also WE 1911s are garbage so you might be tter off getting SRC mags any way.   

 
Does make me wonder if the Double stack ones would work then or if they are too wide to fit ?

 
Marui 1911 is double stack. I don't think anything is compatible with the WE 1911s.

 
Buying my first AEG is there a good checklist to go through to make sure it's working 100% and I didn't get  a Friday gun? 

 
From a retailer? Just use it

Private? Run through the fire selector, check range, check power, check grouping.

 
rocketdogbert said:
From a retailer? Just use it

Private? Run through the fire selector, check range, check power, check grouping.
Click to expand...
Click to shrink...
Retailer, 

I just don't want to pay for a game day and end up with a non functional gun if I could of done a few tests to at least confirm it's working to an acceptable level on delivery. 

 
Is there a simple way to install and remove this type of rail cover? I've already snapped off the end of one of them and would rather not damage the rest. 

s-l1600.jpg


 
Last edited by a moderator:
just push down on the clip and slide, never had any issues with these.... also, if you have these fitted, why not just remove the rails as they not being used?

 
You must log in or register to reply here.
Back
Top