overvoluming on dmr and aeg at the same time

Shitatairsoft

Members
Joined
Aug 3, 2025
Messages
2
Reaction score
0
Recently, I've been using a 2j dmr build on aeg with 0.3g bbs but like to change out the springs regularly on the same aegto turn it into a 1.1j aeg build. I use a overvolumed setup (a full cylinder with a 363mm barrel and a 16tooth 16:1 gearset). Will this stress out my gearset too much if the shimming is fine as I like to semi auto spam my dmr due to the overvoluming as I am worried that my 2j setup will damage my gearset if I swap the full cylinder and m120 out to a ported cylinder with a shs m135 spring.
 
Recently, I've been using a 2j dmr build on aeg with 0.3g bbs but like to change out the springs regularly on the same aegto turn it into a 1.1j aeg build. I like to semi auto spam my dmr.

Uh? The sites you're playing at don't have a "one in the air at a time" rule for DMRs/bolt action?

The point of that and semi-locking (besided the law) is so you don't pepper someone with a barrage of 2j hits.

The two main sites i play at would ban you for that shit. 😕
 
Recently, I've been using a 2j dmr build on aeg with 0.3g bbs but like to change out the springs regularly on the same aegto turn it into a 1.1j aeg build. I use a overvolumed setup (a full cylinder with a 363mm barrel and a 16tooth 16:1 gearset). Will this stress out my gearset too much if the shimming is fine as I like to semi auto spam my dmr due to the overvoluming as I am worried that my 2j setup will damage my gearset if I swap the full cylinder and m120 out to a ported cylinder with a shs m135 spring.
Are you in the UK?
Is your rifle locked to semi only when you are running it at 2J?
Do you semi auto spam it at 2J?

Are the answered to those questions:
Yes
No
Yes?

If they are, you would be breaking the rules at (hopefully) every site in the UK and potentially admitting to a criminal offence.
 
Back
Top