Next project - DMR or Sniper??

Philby21

AF-UK patch owner
Joined
Aug 14, 2015
Messages
379
Reaction score
76
Hi folks,

About to finish off the rebuild of my G36C (opportunity for new internals courtesy of a snapped gear and knackered piston) then I've decided to grab myself an ASR111 Guardian to be a bit different - after which I'm planning on either a DMR or sniper option, just not sure which way to go?

So, suggestions please, I want to start with a reasonably priced base gun that I'll then work to upgrade. The site I play at has limits of 450fps for DMR and 500 for sniper (with MED of course) so I have some scope within these power limits.

I want to go for something not too unwieldy but with good scope to upgrade, I'll work on it quite a bit before skirmishing it in anger and I'll be going for as good a combination of range and accuracy as I can get without buying a Real Sword SVD!

Any advice greatly appreciated :D

No doubt this is going to be a fun can of worms!!

Thanks,

Phil

 
I'd recommend the DMR route as it is more skirmishable. I currently have 2 snipers (a vsr and an srs) both are lots of fun but I am enjoying making a DMR at the moment too with a Krytac

 
E5B13409-2030-4887-B43E-46DDE7CC1892_zpswdacimml.jpg


sorry i had too :lol: :lol: :lol: :lol: :lol: :lol:

in all serious, there both expensive, annoying, frustrating ..... yet infinitely satisfying when you connect with your target :ph34r: more so when you get away with it :lol: :lol:

 
Last edited by a moderator:
DMR - you got quick change spring so go back to aeg when you get the hump option

Sniper - bolt action is what mofo's go for, will cost time & money and you are stuck with a sniper

(or sell it, shelve it etc.....)

I'd test the water with DMR first and see how you get on

 
Last edited by a moderator:
Well, I'm leaning towards the DMR option, the next question is obviously which base gun?

I fancy something a bit different as I keep seeing 417s DMR'd so I'm thinking either SL8 or Steyr Aug?

 
I fancy something a bit different as I keep seeing 417s DMR'd so I'm thinking either SL8 or Steyr Aug?
Steyr Aug - this seems weird... I've seen someone use an aug in game, and it had a very high fire rate, so I'm presuming that gun is more for CQB, get in there sort of thing..

Be cool to see you do it, just was kind of confused, but what do I know about guns... (Nothing)

 
L86 LSW, built in bi-pod......... Hmmmm might do one myself this year

 
Well, I'm leaning towards the DMR option, the next question is obviously which base gun?

I fancy something a bit different as I keep seeing 417s DMR'd so I'm thinking either SL8 or Steyr Aug?
M14 am bestest DMR.

SL8 would be cool but tricky/expensive to get the parts. I seem to remember you can get a kit to turn a G36 into one but I don't know if any one does a whole one off the shelf anymore. If you go AUG get the one with the long barrel and funky .50 cal style flashhider!

 
L86 LSW, built in bi-pod......... Hmmmm might do one myself this year
Not an L129A1? Im looking at doing one as a project gun over a few years but dont really know what to start with.
Although an L86 would be tempting if you could get it somewhere like the one in the middle. Albeit id ditch the bipod for a grip pod and ditch the rear grip.

LSW+and+Sharpshooter+.JPG


 
Last edited by a moderator:
offtopic: Held a real sa80 at my towns military showoff thing and it had that grip on the back but for me there was no way I could hold it with the grip? someone please explain :mellow:

l86 with an elcan would look tasty :wub:

 
Last edited by a moderator:
Not an L129A1? Im looking at doing one as a project gun over a few years but dont really know what to start with.

Although an L86 would be tempting if you could get it somewhere like the one in the middle. Albeit id ditch the bipod for a grip pod and ditch the rear grip.

LSW+and+Sharpshooter+.JPG
I already have a P* Jack'ed SR25, which is close enough to a L129A1 for me :)

I just really like the idea of a l86 dmr .... Been doing some reading up and someone has converted/adapted/hacked a we l85 and ics l86, now there is temptation!

 
JG makes a sl8 and I've got to admit myself if i had the money it would be verrrrry tempting

 
Hmmm. I cant decide if my project should be a British loadout in which case it'd likely be a L192A1. Or whether to go down a PMC style tactical AK. Which will probably be cheaper.

Anyway, as to not hijack this thread... i really like the new HK G28.

 
Last edited by a moderator:
Back
Top