New Airsoft player in town looking for some gun advice!

[Daniel248]

Hi all. New to Airsoft and this forum. Hope everyone is doing good.

As the topic title states I'm looking for some advice. It's almost time I finally buy my first gun. And I've been doing my head in about what to buy. What brand to buy etc etc.

My biggest things about the gun is durability, accuracy, and power. Which has lead me to believing Tokyo Marui is one of my best bets? I may be wrong. Please correct me if I am.

However more importantly it has lead me to the Tokyo Marui Pro Line AEG SOPMOD

http://www.zerooneairsoft.com/product_info.php?products_id=4833

What's everyone's thoughts? Worth the money? Will I get what I'm looking for? Or are there better options out there?

Many thanks in advance. Appreciate your help and advice.

 

[JakeD200297]

Look at VFC weapons if you have like a 500 quid budget there guns don't shoot too hard for UK regs at most fields and there guns have probably the best externals and very good internals. TM are very good but I feel there guns are over priced.

 

[JakeD200297]

The gun manufacture most people will point you towards will be KWA for those specs but if you want to play with it you will have to downgrade the GPS which is and added cost. They are also very hard to find with a RIS rail on.

 

[Airsoft_Mr B]

I hardly ever see any recommendations for KWA. TM are definitely worth it, if you can afford. Externally and especially internally.

 

[JakeD200297]

Fair enough yea TMs are great as they are almost the innovators of airsoft you could say. I've personally just heard great things about VFC

 

[PT247]

PTS RM4 ERG

Cheaper than the TM, has recoil, shoots dead straight, may be a little hot out the box but run 500 BBs through it and see what it chronos at, mine with the hop dialled in for 0.3g BBs is bang on 350fps which is my site limit for AEGs.

Probs the best RIF you can buy for the money if you can find one in stock.

 

[Esoterick]

Any of the TM recoil guns are a solid choice, with the SOPMODs you might want to consider getting it rewired to a deans connector as the SOPMOD proprietary batteries aren't very good and are very expensive. You should be able to fit at least a 7.4V 1250 mAh stick LiPo in the stock, which can be picked up for about £15 and will last you between 1/2 and a full day depending on how much ammo you get through.

 

[clumpyedge]

heres a little thing i did with my recoil, I used a CTR stock and wired it to the outside and i use a fake Garmin GPS to contain the battery that way i can have the stock all the way down or up and still have plenty of battery power and the ease of changing a battery without taking the stock apart! If you can afford it go for the TM mate you wont regret it (yours sincerely a TM fan boy)

View attachment 15956

 

[Colonel Kurtz]

Look at VFC weapons if you have like a 500 quid budget there guns don't shoot too hard for UK regs at most fields and there guns have probably the best externals and very good internals. TM are very good but I feel there guns are over priced.

Click to shrink...

VFC is the one that's overpriced, paying loads extra just for real-steel logo's on the gun. As for people commonly recommending KWA, the only recommendations about them i've ever heard was don't buy. Sounds like you've gotten all your advice from your local small-time retailer, or people who took said advice.

 

[Ian_Gere]

I haven't had a TM Recoil Shock apart, but their usual gearboxes are pants. Not just poor value for money, I mean worse quality parts than the cheap Chinese clones based on them.

 

[Cold3lit3]

PTS RM4 ERG

Cheaper than the TM, has recoil, shoots dead straight, may be a little hot out the box but run 500 BBs through it and see what it chronos at, mine with the hop dialled in for 0.3g BBs is bang on 350fps which is my site limit for AEGs.

Probs the best RIF you can buy for the money if you can find one in stock.

Click to shrink...

So in fact it's still hot then

then?

Do you not chrono with 0.2's?

 

[Deek]

TM everyday if you can afford it.

My regular skirmishing weapon is a Tokyo Marui MC51 which I had imported from Japan about 17 years ago.

I thought she died recently, but it was just the hop rubber had perished (can't think why?).

A friend of mine has a large collection of airsoft weapons (we are talking over 100) and has several TM weapons that are over 15 years old, and they fire without missing a beat. Granted, they aren't skirmished with, but still...

 

[PT247]

So in fact it's still hot then

then?

Do you not chrono with 0.2's?

Click to shrink...

no it is not hot, it is bang on 350 FPS on site mags and BBs, which is around 285 FPS on 0.3g BBs

 

[Alex34]

You cannot go wrong with TM... plain and simple.

Are they worth the money? I haven't heard a REAL TM owner complain yet.

Do yourself a favour and have a test drive of TM recoils and other AEGs at your local shop. Even if you don't get to shoot them, handle them and shake them about... decide for yourself.

 

[Colonel Kurtz]

Half of the comparative extra expense from TM is in the exchange rate, so don't think they're really that much more expensive, it's just bad economic luck for us. Also it's easier for retailers to profit from anything sold in dollars or made in china so they have to add their margin on to what is an already unhealthy exchange rate.

They just keep working, I recently bought a 2nd hand MP7 that looks like it's been lovingly used for a decade and it still works flawlessly. I took it entirely apart and found a couple wear/tear issues in the gearbox that should have stopped it but nope, just kept on trucking.

It's not like there's significant extra tech in them or anything, they've just been doing it long enough and well enough to get the manufacturing process sorted and iron out all the little issues between the balance of parts.

 

[Sacarathe]

Half of the comparative extra expense from TM is in the exchange rate, so don't think they're really that much more expensive, it's just bad economic luck for us. Also it's easier for retailers to profit from anything sold in dollars or made in china so they have to add their margin on to what is an already unhealthy exchange rate.

Click to shrink...

Aye, could kill the industry with a "for the people, by the people", airsoft store.

Crowd source 100k, open shop in certain European country, kill off other retailers /sadface

 

[Tad]

Hi all. New to Airsoft and this forum. Hope everyone is doing good.

As the topic title states I'm looking for some advice. It's almost time I finally buy my first gun. And I've been doing my head in about what to buy. What brand to buy etc etc.

My biggest things about the gun is durability, accuracy, and power. Which has lead me to believing Tokyo Marui is one of my best bets? I may be wrong. Please correct me if I am.

However more importantly it has lead me to the Tokyo Marui Pro Line AEG SOPMOD

http://www.zerooneairsoft.com/product_info.php?products_id=4833

What's everyone's thoughts? Worth the money? Will I get what I'm looking for? Or are there better options out there?

Many thanks in advance. Appreciate your help and advice.

Click to shrink...

You will buy that, then get bored because it will be everything you want.

Yes TM are good for the brand, however there are more then a few who have pointed out issues with their internals.

I am going to be the voice of reason here..

Since you are newer to airsoft, why not get a decent entry level (£120) or Amateur (£240) and then learn about the sport. Put that extra money aside for things like gear / holsters, a side arm / Uprgades.. Heck you can get all of that for less then that gun, and then you can start learning the internals and upgrading them. If it all goes badly you've not spent £££ on something that you may not want.

 

[Colonel Kurtz]

Aye, could kill the industry with a "for the people, by the people", airsoft store.

Crowd source 100k, open shop in certain European country, kill off other retailers /sadface

Click to shrink...

Yeah agreed, I'm happy to pay 10-20% extra knowing it's keeping lots of the people who founded the sport going, rather than get it all dirt cheap in a Walmart forced the local grocer to shut-down kinda way

 

[Colonel Kurtz]

You will buy that, then get bored because it will be everything you want.

Yes TM are good for the brand, however there are more then a few who have pointed out issues with their internals.

I am going to be the voice of reason here..

Since you are newer to airsoft, why not get a decent entry level (£120) or Amateur (£240) and then learn about the sport. Put that extra money aside for things like gear / holsters, a side arm / Uprgades.. Heck you can get all of that for less then that gun, and then you can start learning the internals and upgrading them. If it all goes badly you've not spent £££ on something that you may not want.

Click to shrink...

It is a tough choice than can go either way, buy the ultimate gun and risk not liking airsoft, or buy an entry-level gun and end up buying the ultimate one later and making it redundant, or spending more to upgrade the entry level gun to pimped standards (always costs fair bit more to do bit by aftermarket bit than all in one go to start)

I'd agree what you suggest is the safer bet, as if you like the game enough to buy a £500 gun you wont mind having a £150 one sat unused in the closet, or can always flog it. Depends how certain you are that airsoft is for you I guess

I haven;t seen many people complain about the internals, and never seen anything wrong with them myself. The only complaint/warning i ever see is that you will have issues with TM when you start messing with them, even just a harder spring (which almost everyone seems to get, the guy at Zero One was shocked when i didn't want this option with a new TM, it's like a default for them). Problem is this isn't what it is designed/balanced to do, and TM's work well because this balance has been so finely tuned by them over the years, so TM certainly isn't a tinkerers choice (unless you replace everything with laylax parts or similar and find your own balance). But they are perfect if you just want a tool for the job you dont have to worry about.

 

[Daniel248]

Thanks for the advice guys. Tad great words of wisdom and you sound exactly like my mate who got me into this wonderful sport. I will take what you guys have said. Try a £200/£250 gun like a G&G or Kings Arms. Maybe even a WE or something kit myself out then later towards then end of the year when I've found out if its for me. Buy a monster of a gun.

Many thanks guys. Really appreciate the advice.