MrCheesman94
Supporters
- Jul 23, 2013
- 301
- 19
i need to find a mosfet for my scar but i need a good size one as i can't get it into the gearbox and it wont fit in the stock because of the prongs, any idea's
need a MosFet for G&G Scar-L
- Thread starter MrCheesman94
- Start date
MrCheesman94
Supporters
- Jul 23, 2013
- 301
- 19
- Thread starter
- #3
i was thinking this http://www.ebay.co.uk/itm/GATE-NANO-SSR-AIRSOFT-MOSFET-LIPO-NIMH-/321418498829?pt=UK_SportingGoods_Hunting_ShootingSports_ET&hash=item4ad609130d
same make but it's just plug in
same make but it's just plug in
Lozart
Supporters
- Jun 24, 2013
- 8,493
- 4,942
They're still quite big to fit into the SCAR-L though. I have a Nano AB, it's way larger than the Pico.
MrCheesman94
Supporters
- Jul 23, 2013
- 301
- 19
- Thread starter
- #6
the thing i was thinking was it would mean no wiring(which i'm not very good at) and all i would have to do is plug it in
Lozart
Supporters
- Jun 24, 2013
- 8,493
- 4,942
MrCheesman94
Supporters
- Jul 23, 2013
- 301
- 19
- Thread starter
- #8
no but i want to use a 11.1v lipo and i can't use it for to long as it will burn out my trigger contacts and then all i need is a high torque motor and 13:1 gears and it will be perfect
Lozart
Supporters
- Jun 24, 2013
- 8,493
- 4,942
So how about getting the Pico SSR and wiring it in but on the fixed side of the stock? As in the bit that stays attached to the gun when you take the battery out.
MrCheesman94
Supporters
- Jul 23, 2013
- 301
- 19
- Thread starter
- #10
the only bit that stays attached is the prongs so there is no way to wire one in thats why i thought the nano would be perfect because i can attach it to the battery and wire in the back part of the stock
Lozart
Supporters
- Jun 24, 2013
- 8,493
- 4,942
Ah yeah, just looked at mine - no space is there.
Maybe if you put the Nano in where the fuse sits? Only problem is that without wiring in the trigger contact you don't get the improved trigger response.
MrCheesman94
Supporters
- Jul 23, 2013
- 301
- 19
- Thread starter
- #12
the improved trigger response isn't to bad standard
Lozart
Supporters
- Jun 24, 2013
- 8,493
- 4,942
True, but as dex just said, without wiring it in you will still be passing full current through the trigger contacts plus you'll have to wait for the mosfet to react before you get a shot out. It'll be a small increase in time but it's there nonetheless.
Unrustle_Thine_Jimmies
Members
- Mar 3, 2013
- 1,074
- 424
Lozart
Supporters
- Jun 24, 2013
- 8,493
- 4,942
I can see the problem with fitting to the SCAR though. I had a look at mine and there's a couple of issues - there's bugger all space in the stock other than where the fuse holder is and then you need to bridge the hinge on the stock. Personally I think I'd look at opening it up and seeing if there's any space in the receiver but I'd still go with the Gate Pico.
Mr Monkey Nuts
Members
- Mar 30, 2014
- 841
- 611
The pico ssr is no bigger than 4 bbs in a row, I'm sure there is somewhere you can find to fit that. if not, you have no chance of fitting any mosfet anywhere.
The problem isn't so much the size of the mosfet (the Pico mosfet is easy to lose in the stock) but the fact that the stock hinges and the battery in the sliding rear stock connects/ disconnects via fixrd plug/sockets. The mosfet trigger wire/wires either need to be capable of hinging (therefore vunerable) or being unplugged. Both options aren't ideal.
Mr Monkey Nuts
Members
- Mar 30, 2014
- 841
- 611
Ah I see, the asg ultimate mosfet has spade connectors, designed with front wired m4 in mind.
Similar threads
