• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

My BB gun

Cain_hill

Members
Joined
May 29, 2016
Messages
2
Reaction score
0
It's not shooting I have been charging the battery for some time now and I put it in my gun and it's not shooting can someone help me

 
Think you're going to be needing a little more detail bud, based on the information you've given us we've got "My X[absolutely anything] does not work".

What type of battery is it, when did you first notice a problem, do you have another battery, do you have a friend with another battery, did anything unusual happen (to the battery or the gun) before it stopped working?

 
Last edited by a moderator:
Sounds like a dodgy flange, wrap your gun in towels and blow a hairdryer up for 3x 80second bursts.

 
Are you mad? An 80 second burst is going to ruin the flange knob. I'd stick to 70 seconds max.

And use tea towels and not bath towels unless you want the same results as that other guy who messed his up.

 
Last edited by a moderator:
Are you mad? An 80 second burst is going to ruin the flange knob. I'd stick to 70 seconds max.

And use tea towels and not bath towels unless you want the same results as that other guy who messed his up.
Don't be silly 80 is perfect unless it's a shitty g&g or ICS.

 
That would depend on wether the giggle pin has come loose from big end or not

 
The important question is, whats the best LiPo to run the hairdryer?

 
Last edited by a moderator:
LiPO? You mad?

Run LiFe only, minimum voltage of 8.4GV or the air thruster might end up inside the stereo filter coils.

 
Don't be silly. LiPo is fine unless you have one of the crap models like Tokyo Marui or Systema PTW.

 
I've got a Systema level TM ;-)

I've always found that any problems with the LiPo can be solved by stabbing them with a knife. Pierce them to vent them and you'll never have a problem with them again ?

 
Last edited by a moderator:
I've got a Systema level TM ;-)

I've always found that any problems with the LiPo can be solved by stabbing them with a knife. Pierce them to vent them and you'll never have a problem with them again ?
Ah you had puffy battery syndrome (PBS) I wouldn't use a knife a pin or needle would be better IMO.

OP have you fixed it yet? Clean the Wang chamber it starts smelling after alot of use and generates alot of slime which then goes crusty and stop things working.

 
Ah you had puffy battery syndrome (PBS) I wouldn't use a knife a pin or needle would be better IMO.

OP have you fixed it yet? Clean the Wang chamber it starts smelling after alot of use and generates alot of slime which then goes crusty and stop things working.
Yep, something which puts your hands closer to the battery is bound to be safer.

ALOT.png


 
Back
Top