• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Mp5k parts swapability

Roundel91

Members
Joined
Sep 25, 2016
Messages
177
Reaction score
2
In short, it won't fit....easily. The grooves down the side of the receiver where the stock rails slide are blocked with a welded on metal plate towards the back end. This is recreated on the replicas so if you were determined to fit a sliding stock, you'd need to grind these out to allow the rails to slide.

 
Get the folding stock varient, as it replaces the baseplate.

 
I got JG MP5 PDW version and I tried to fit CYMA buttplate to transform it to MP5K. It looked alright at the pictures.... And it ended up with me customising it for 2 hours. It was aluminium so no big issue but just general world of warning that even that they clone each other there is high chance that you will need some work to make it fit.

 
Thanks for the advice all. Managed to find a forum post on another website that somebody did what id like to do. In short the work was alot more than just swapping parts out and a bit of jiggery pokery, well beyond my skillset anyway.

Will see if i can get my hands on a pdw for a look/feel before thinking about something else instead

 
Back
Top