• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Load-Out / Loadout Picture topic

Yeah DPM was mine too, but moving with the times for airsoft. 

Although have been thinking of getting some DPM again.  

 
Yeah I was just messing about, if you want to know what parts will fit your gun just start a thread to ask and detail the brand with some proper pictures of the area in question (not in a locker etc).  If you buy a long enough screwdriver to get the buffer tube off then if it's setup like a standard AEG most likely you can get a sling plate to fit the rear of the lower receiver.

 
Last edited by a moderator:
CKinnerley said:
Yeah I was just messing about, if you want to know what parts will fit your gun just start a thread to ask and detail the brand with some proper pictures of the area in question (not in a locker etc).  If you buy a long enough screw driver to get the buffer tube off then if it's setup like a standard AEG then most likely you can get a sling plate to fit the rear of the lower receiver.
Click to expand...
Damnit! Why do i need to take eberything so literal ? lol. yeah the buffer tube seems to be held like that. On my Classic Army the castle nut actually can be fastened.

 
Last edited:
These days I'm rocking a US Army UCP Digital Camouflage loadout.

I fancied something different and wasn't bothered by having camouflage that's basically useless, so I figured I'd wear the US Army's $5Billion mistake.

View attachment 41317

I stand out like a sore thumb, but I love the look. Haters gonna hate though, eh?

The loadout comprises:

  • US Army ACH Helmet, Issued UCP camouflage Cover and Revision Wolfspider Goggles
  • US Army Interceptor OTV protective vest system
  • US Army issue wicking combat shirt
  • US Army issue ACU combat trousers
  • US Army issue knee pads
  • Lowa desert combat boots
  • Mechanix M-Pact gloves
View attachment 41318

The camouflage actually does work quite well against the concrete buildings at my local site, but in grass I may as well wear luminous orange...

I'd say the key positive of the loadout is that the US Army put a lot of time, money and effort into making the kit comfortable. So despite the weight of the kit, it feels great to wear and isn't crazy warm either.

View attachment 41319

The sniper in the photos is my Ares Amoeba Striker AS01.

  • Ares Amoeba Striker AS01
  • Short outer barrel
  • Action Army hop unit
  • CrazyJet inner barrel
  • Bespoke Airsoft cylinder kit
  • 90 degree GAP sear
  • Ares flash hider
  • 3.5x - 10x scope
  • Maple Leaf Deception bucking
  • Maple Leaf concave nub


Photos in this post were taken by the lovely @Arwen at yesterday's game day. (Viper Strike Airsoft in Dundee.)

 
Last edited by a moderator:
Skara said:
Nice to see something different than MTP/Multicam or black..
Click to expand...
Cheers man, that's what I thought.

There's loads of MTP and black at the sites I play at, so it's nice to be the odd one out.

My other go-to loadout is also something a bit different...

German army Tropentarn:

View attachment 41320

 
Last edited by a moderator:
Actually played a game at the weekend.

P9YKN4ArKBMhAsHNFISA--Hxc_HS0G4tyuwT33LQyQGBd5wpkdRs8W-bwDy3EQK2-gxgsp9rYwD0ojD1hLXiZU1OdeDuZkTXVO9mtZP7Xk6qDVzxfd04VaCuGRico_ChrHiP1NAt8tJmp8CaKmbZMld_ZwewZNV9Gt1Pwwb7XpEuutcGrAZ0aAsKpcg7RPTQ496ATm0lfXhomNhFiDXmRH0FBc5I5hLi3cMAkPZokR0D_xoR6vsb9Tn7orO7BYhPqlA9byAxwzfr9Nf4dTJugqQOJT3hHVQzV-rnGb0aLtFSESpuov5HOs9x4qcwTunA6L1bn0RZSQu7aJ6sab79imd7jrEQ8enf0bhFlPH3m0JhbAkj-y6si2iKokOnJpKtuM8M34l3Tz9ktdhpF7A-5f5pIqfaci8vvgKMMHTEKp08T34vnKZx6Bgj3Wxph-LGK9Q7TBtDBpdNY2FgKvLVIFkKTaOWW14cItHv2esXDCEXaAYA14uvU9If0zw02cGTaYd7HewtD_hEKrDJYl3UiO-i29b8UsRFzrDmsA5qaGVMs8lhJI1bhAUALds-xCOjrlXvB49Cl1Ifu_LhOY8GwFQPPT0acZydfTsN9c-RmouPVWiLXtsS407Y-A-RvfMVBh8LQMhaPuBTOR3dwcFCtVnh=w769-h1264-no


 
Sawyer said:
What lid is that, the helmet mount looks fairly robust and I'm looking for one.
Click to expand...
It's a wilcox three hole shroud but you can get repro ones made by FMA, it did not come with the helmet (the helmet is an oper8 helmet that I got from socom tactical).

https://www.fire-support.co.uk/product/fma-wilcox-3-hole-night-vision-mount-black

Edit: not sure when you say helmet mount if you mean the adapter or the night vision mount but the night vision mount is an FMA INVG and the adapter is a norotos dual dovetail (they are expensive though and can only be found on facebook groups). 

 
Last edited by a moderator:
You must log in or register to reply here.

Similar threads

Impulse
Returning to the hobby after a 7 year hiatus
Replies
4
Views
894
Too0ld
T
Adolf Hamster
Hamster’s guide to the (sort of) science of pew pewing!
2
Replies
21
Views
8K
Adolf Hamster
Adolf Hamster
TheFull9
FirstSpear Strandhögg Plate Carrier
Replies
8
Views
6K
TPI
TPI
Back
Top