Lozart
Supporters
- Jun 24, 2013
- 8,495
- 4,944
Is my chest rig too low?
Depends...how low is your chest?
Facetious comments aside, if it works for you, it's where it needs to be. Simple.
-
Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.
The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here
If you have any issues please post about them in the Forum Feedback thread: Go Here
Load-Out / Loadout Picture topic
- Thread starter Nutster
- Start date
Depends...how low is your chest?
Facetious comments aside, if it works for you, it's where it needs to be. Simple.
SgtTalbert
Members
- Jan 26, 2012
- 871
- 373
Is my chest rig too low?
Technically probably should be around 2-3 inches higher. However, as lozart said, if it works for you and you can get to everything quickly, why change it
Last edited by a moderator:
Skara
Members
- Oct 20, 2017
- 3,231
- 1,240
Yes.
The top should sit right in line with your nipples, so that your belly is clear of anything.
Depends primarily on how comfortable you feel though. I like my rigs to sit high, others like them low and sloppy around their bellies
- Oct 7, 2017
- 6,070
- 5,360
Looks fine, as has been pointed out it's about you being comfortable & being able to access mags etc, as well as move & bend comfortably.
Is my chest rig too low?
i wear mine quite low, cos I'm a porker ?.
paradoxum
Members
- Feb 7, 2019
- 523
- 227
General question re; harness+belt vs. a plate carrier - does a plate carrier setup help much in the winter we're now getting into? In the summer I'd sweat buckets with just my harness and belt, I suppose a shirt under my invader gear top might help in winter but yeah just wondering how they fare for you guys in different weather.
Edit: Might aswell post my helm. Got my new TMC RAC headset in tan today, looks a lot better imo;
vs old;
Edit: Might aswell post my helm. Got my new TMC RAC headset in tan today, looks a lot better imo;
vs old;
Last edited by a moderator:
TheFull9
Supporters
- Dec 17, 2011
- 3,571
- 2,341
Depends what you mean by help, any sort of PC, Armour carrier, vest or large chest rig will inherently hold in heat. It's just a couple of layers of thick, non-breathable fabric - physics.
Technically speaking when you don't need to protect your vital organs from bullets and frag a belt rig and layering with some jackets is better overall because you control how you layer up or down (and adjust heat retention with zips), whereas a piece of load-bearing equipment on your torso just retains a fixed amount of heat and sweat with no capacity for adjustment.
Which layers to wear on your torso all depends on activity levels, ambient temp and precipitation/wind, plus it's also kind of a personal thing depending on how hot you personally 'run'. If you're always red and sweaty and rarely stand still then probably just a wicking t-shirt with uniform shirt/softshell jacket. If you're cold blooded and lay on the ground a lot then a long-sleeve insulated base layer followed by mid-layer (PCU L3 thick fleece, PCS issue 'buffalo' etc) with a smock or softshell over the top might be good. That would be a super simple breakdown of the bare bones for a typical UK autumn/winter day.
paradoxum
Members
- Feb 7, 2019
- 523
- 227
That's actually pretty helpful thanks. I tend to sweat a lot in general so I'm just worried about running about in the cold, sweating, and then stopping and freezing my ass off from the cold sweat.
TheFull9
Supporters
- Dec 17, 2011
- 3,571
- 2,341
Load bearing kit won't really play in to that as much as your clothing, though obviously any rig will not allow sweat to evaporate through it unless it's like a vest that's mostly mesh. Primarily don't wear anything with cotton in it, cotton fibres love soaking up water, go for pure synthetics (poly and nylon) especially on the base layers so you don't have a moisture sat next to your skin, but this applies to all layers. Almost all camo uniforms are poly/nylon and cotton blended together, if you really want to stay dry get a cheap UK mil issue t-shirt (they wick and dry as quick as any gucci kit if not better) and wear a non-insulated softshell of the best quality you can afford (the fleece insulated ones hold on to sweat and makes it take far longer to be transported from the inside to the outside of the jacket). If you add in a mid-layer make sure it's highly breathable and lets air through, not something thick and dense that'll hold on to that evaporated sweat.
Last edited by a moderator:
PopRocket123
Members
- Dec 12, 2016
- 1,518
- 773
Looks awesome. How are you finding those headphones?
Look, I'm having a tidy up and I tried to crop it out okay!? ?
Also, on that note, the really useful 9l storage boxes are perfectly sized for magazine storage.
Enid_Puceflange
Members
- Jun 23, 2018
- 2,327
- 2,344
Last edited by a moderator:
Lozart
Supporters
- Jun 24, 2013
- 8,495
- 4,944
My Daniel Defense MK18 AEG ? hope yall like it.
Should I keep the covers on or off from the sides of the rail?
View attachment 50762
View attachment 50763
Should I keep the covers on or off from the sides of the rail?
View attachment 50762
View attachment 50763
Lozart
Supporters
- Jun 24, 2013
- 8,495
- 4,944
Very nice, I'd leave them off but I wear gloves so that may make the difference for comfort.
