- Thread starter
- #21
Last edited by a moderator:
Navigation
Install the app
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
More options
Style variation
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
KWA Kriss Vector issue
- Thread starter Schultz
- Start date
G
Guest
Guest
Haven’t watched the video as I’m at work, but it won’t fire unless you press the bottom of the auto sear, as that releases the hammer when the recoil buffer rises.
IF you hold the auto sear release up, and manually cock the hammer, then pull the trigger, the hammer releases. (Allow it to do it gently, not snap, or you may damage the spring).
Keep the trigger pulled, and re-rack the hammer.
You should first see the semi auto sear drop into the hammer groove, then as you release the trigger the primary sear (trigger bar) first engages the hammer groove, then lifts the semi sear clear of the hammer groove.
IF you hold the auto sear release up, and manually cock the hammer, then pull the trigger, the hammer releases. (Allow it to do it gently, not snap, or you may damage the spring).
Keep the trigger pulled, and re-rack the hammer.
You should first see the semi auto sear drop into the hammer groove, then as you release the trigger the primary sear (trigger bar) first engages the hammer groove, then lifts the semi sear clear of the hammer groove.
- Thread starter
- #23
Yes that is what i see. Changed the previous video.IF you hold the auto sear release up, and manually cock the hammer, then pull the trigger, the hammer releases. (Allow it to do it gently, not snap, or you may damage the spring).
Keep the trigger pulled, and re-rack the hammer.
You should first see the semi auto sear drop into the hammer groove, then as you release the trigger the primary sear (trigger bar) first engages the hammer groove, then lifts the semi sear clear of the hammer groove.
G
Guest
Guest
It looks like it is functioning correctly, though possibly a little stiff.
Describe your original problem again, hammer not resetting?
Is the recoil buffer returning fully to the up position? No damage to the spring or buffer?
If the gun is firing burst or auto on semi setting, it’s definitely the sears though.
All three sear return springs in correctly?
Describe your original problem again, hammer not resetting?
Is the recoil buffer returning fully to the up position? No damage to the spring or buffer?
If the gun is firing burst or auto on semi setting, it’s definitely the sears though.
All three sear return springs in correctly?
Last edited:
- Thread starter
- #25
Problem is that after firing a few shots on semi it will not fire again until i pull the trigger again (sometimes after pulling the trigger more then twice).
Burst fires burst, no problem here.
Auto fires auto, no problem here.
The recoil buffer is returning fully, must say if i assemble everything the blowback housing needs some extra help to get in correctly (making the turn from the bottom section to the upper section).
Burst fires burst, no problem here.
Auto fires auto, no problem here.
The recoil buffer is returning fully, must say if i assemble everything the blowback housing needs some extra help to get in correctly (making the turn from the bottom section to the upper section).
G
Guest
Guest
Like I said, primary sear and/or hammer.
You need to clean and lube your frames and bolt, not sure how the recoil buffer is returning to full height if the bolt isn’t returning properly, the two are inter-dependant.
You need to clean and lube your frames and bolt, not sure how the recoil buffer is returning to full height if the bolt isn’t returning properly, the two are inter-dependant.
J
Jayshhli
Guest
I have the exact same problem.
Has as anyone figured it out?
Has as anyone figured it out?
G
Guest
Guest
What problem?
Hey guys... really need some help.
My guns trigger, after a few shots in semi will stop working and I’ll have to spam the trigger for it to reset before I can shoot again. I can feel the trigger ‘click’ back then I can fire again.
2 round burst and full auto are totally fine.
Anyone else have this issue?
ive checked my trigger bar, Sears, cleaned and lubed... what else can it be? Issue is only in semi.
Has anyone figured it out? I have the same issue!
My guns trigger, after a few shots in semi will stop working and I’ll have to spam the trigger for it to reset before I can shoot again. I can feel the trigger ‘click’ back then I can fire again.
2 round burst and full auto are totally fine.
Anyone else have this issue?
ive checked my trigger bar, Sears, cleaned and lubed... what else can it be? Issue is only in semi.
Has anyone figured it out? I have the same issue!
- Thread starter
- #32
So i did sand the sear. Problem is still there. What i noticed is that when it stops firing and i open here i must push the trigger bar to the top of the gun to reset the trigger. When resetting also the full-auto sear moved a bit. Any ideas on this @rocketdogbert?
G
Guest
Guest
So i did sand the sear. Problem is still there. What i noticed is that when it stops firing and i open here i must push the trigger bar to the top of the gun to reset the trigger. When resetting also the full-auto sear moved a bit. Any ideas on this @rocketdogbert?
Im not sure I understand, the trigger bar doesn’t really go up?
The return spring on the bar pushes it back up to allow the hammer to reset, does it look correct inside, like this?
View attachment 48182
- Thread starter
- #34
Sorry for mine late reply, was a couple days out of town. If it does not fire i have to push the trigger bar (red circle) to reset the trigger.
View attachment 48417
View attachment 48417
G
Guest
Guest
Sorry for mine late reply, was a couple days out of town. If it does not fire i have to push the trigger bar (red circle) to reset the trigger.
View attachment 48417
Have you disassembled the trigger group?
I’ve never had the issue, but it sounds like your trigger spring (the thin, U-shaped bar) is not returning, so it’s either bent or lost its springiness
- Thread starter
- #36
Some time ago i disassembled it. Was also thinking of a bad return spring. But then again it is weird that a first few shots (or burst or full-auto) are fine.
I will disassemble it again and make some photo’s. Can compare the spring with a spare one i have.
I will disassemble it again and make some photo’s. Can compare the spring with a spare one i have.
- Thread starter
- #37
G
Guest
Guest
Work through it logically. If manually pushing the primary sear (trigger bar) up resets it, either:-
Return spring isn’t working properly
Primary Sear is sticking
First, if you know the replacement spring is good, try that.
If that doesn’t work, either the primary sear is sticking in its guide, or its sticking on the primary hammer
Return spring isn’t working properly
Primary Sear is sticking
First, if you know the replacement spring is good, try that.
If that doesn’t work, either the primary sear is sticking in its guide, or its sticking on the primary hammer
- Thread starter
- #40
Replaced the spring but problem still occurs. Made a vid. of the problem.
Here you can see that after i push the trigger bar it all resets.
View attachment 48920
Here you can see that after i push the trigger bar it all resets.
View attachment 48920
Similar threads
Share: