M MTW Members Joined Oct 7, 2025 Messages 20 Reaction score 62 Sep 30, 2026 #1 I'm trying to put a bow master valve knocker retention spring in，but can't take the pin out. Would be really grateful if anyone could provide some help and advice Attachments IMG_20260930_214115.webp 24.3 KB · Views: 10
I'm trying to put a bow master valve knocker retention spring in，but can't take the pin out. Would be really grateful if anyone could provide some help and advice
Ronin0033 Members Joined Nov 1, 2020 Messages 356 Reaction score 106 Oct 3, 2026 #2 Can’t say I’ve stripped my ones that far, but it just looks like a friction fit pin? Grab a hammer and appropriately sized punch and knock it through.
Can’t say I’ve stripped my ones that far, but it just looks like a friction fit pin? Grab a hammer and appropriately sized punch and knock it through.
M MTW Members Joined Oct 7, 2025 Messages 20 Reaction score 62 Yesterday at 10:53 PM Thread starter #3 Update: dremeled about 1mm on both sides and removed the pin successfully The areas around the pin was damaged but don't influence the functionality，the vector is working really well now Attachments 1000407891.webp 109.6 KB · Views: 6 1000407893.webp 31.7 KB · Views: 4 1000407892.webp 114 KB · Views: 4 1000407975.webp 140.4 KB · Views: 4
Update: dremeled about 1mm on both sides and removed the pin successfully The areas around the pin was damaged but don't influence the functionality，the vector is working really well now
