Krytac Kriss Vector Mag

[RAM]

Hi I just purchased a Krytac kriss vector and I have to press the mag release to get the mag to load. Is this normal or do I need to check that something is not binding up ? 

 

[Guest]

If you bought it used, chances are somebody left bb’s in the mag.

These mags are prone to spring compression issues if you do that, which in turn might lead to your issue

 

[RAM]

which in turn might lead to your issue

Click to shrink...

Sorry I think my explanation might be misleading. I cant get the mags to lock into the magwell unless I press the mag release as where on my other AEG'S which are M4 platforms I can just push the mags into the magwell and they click into place and lock without having to press the mag release button. Hope this makes a bit more sense.

 

[Guest]

Is the gun new, or are the mags or the mag catch worn?

Try tipping the mags forward slightly as you push them home.

Does the gun have a standard mag catch?

 

[RAM]

Is the gun new, or are the mags or the mag catch worn?

Try tipping the mags forward slightly as you push them home.

Does the gun have a standard mag catch?

Click to shrink...

Hi the gun is not new it is used. I tried tipping the mags forward as I was loading them and backwards nothing seems to allow them to lock home unless I press the mag release slightly, It only needs to be pressed about 1mm for it to allow the mags to then slip into place, Every mag looks OK to me with now signs of damage or wear.

The mag catch looks standard to me but having never owned a Vector before I can't be 100% sure.

I have tried to get some pictures to help with this. 

View attachment 74082

View attachment 74083

View attachment 74084

View attachment 74085

 

[RAM]

Just had a look at the parts diagram and it looks like the mag release is stock.

View attachment 74087

 

[Guest]

It does look standard, it’s plastic I take it?

Is it damaged? New, undamaged Krytac catch on the right here

View attachment 74089

View attachment 74090

 

[RAM]

I thought it was metal i will double check tomorrow. Thanks for the pictures. 

 

[RAM]

Well I just checked it and it all looks fine to me. But on a good note I figured out how to get the mags to load without pressing the mag release button. I have to twist the mags slightly for them to slide home. Now I just have to wait for the new nozzle and cylinder head to hope I it solves the low FPS as I don't want to have to buy a new inner barrel to get it back to stock length.