-
Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.
The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here
If you have any issues please post about them in the Forum Feedback thread: Go Here
Help with SR25 dmr ?
- Thread starter ashlots
- Start date
Sitting Duck
Supporters
- May 11, 2014
- 4,894
- 1,735
G&G's use normal v2
A&K use extended v2 or 2.5 gearbox
Difference - air volume
The extended v2 has 19 tooth sector to give a longer piston stroke to create more air required for longer barrels
Though length doesn't equate to accuracy - but if you try and fit a 550mm+ barrel to a G&G SR25....
good luck getting the oomph required - even with a bore up cylinder
You can turn almost any decent normal M4 into a dmr without having to go down the must have SR25 route
most sites aren't that picky on proper DMR's as long as they are locked to semi
or go for cyma m14 - CM032 that seems to be a popular dmr gun
A&K use extended v2 or 2.5 gearbox
Difference - air volume
The extended v2 has 19 tooth sector to give a longer piston stroke to create more air required for longer barrels
Though length doesn't equate to accuracy - but if you try and fit a 550mm+ barrel to a G&G SR25....
good luck getting the oomph required - even with a bore up cylinder
You can turn almost any decent normal M4 into a dmr without having to go down the must have SR25 route
most sites aren't that picky on proper DMR's as long as they are locked to semi
or go for cyma m14 - CM032 that seems to be a popular dmr gun
Baz JJ
Members
- May 23, 2013
- 2,349
- 502
Last edited by a moderator:
......Similar threads
