Help with sons xmas gun please..bulldog

A

asadunkley

Members
Joined
Dec 25, 2016
Messages
10
Reaction score
0
My son has just got a bulldog sr47 rifel hes tried to fire it but no bbs come out ...ive tried turning gun upside down and fire to pre charhe with bbs and it fires ?

What are we missing ?

 
Make sure you have wound the mag up a lot

Keep winding n winding way after the bb's appear

At least 10 or a dozen more winds

You may hear a click saying it's fully wound

 
Is the wheel supposed to be raised out?..as this one seems recessed?

 
Last edited by a moderator:
Not likely. As long as you can turn it its fine. Feel free to post s pic and we will confirm for you.

 
If it's a normal high capacity mag

Then fill with bbs then wind wheel until bbs appear

AND KEEP WINDING to increase tension

You need a good/lot of tension to feed

Should say this in manual if you got one

Keep winding mag a good dozen or so

It should make a funny click when it reaches full tension

Then it should fire say 20 bbs or so

After that 20 bbs you will need to wind again

As gun will cease to feed once more

 
asadunkley said:
Is the wheel supposed to be raised out?..as this one seems recessed?
Click to expand...
Click to shrink...
It doesn't stick out a great deal, I have a few mags

Exactly same mag n model some wheels stick out a tiny bit more than others

You are probably only got say 5 o'clock to 7 o'clock showing

If gun is turning over, or cycling as we say

If mag is fully wound it should just work

Keep us updated, please ffs test outside not inside

Bb's bounce a lot remember eyepro and tons of common sense

Gun's hop could be fully on or a jam

But I am assuming this is guns first outing so should just work

Please please please remember safety

Eye protection, common sense, remove mag and fire gun a few times to clear gun of bbs's

There is nearly always a bb left in gun

This HAS to be cleared ALWAYS !!!!

Seriously, safety is above everything else

Stay safe not just Xmas but always

 
It has no pronounse wheel on mag to wind if anything is sunken in mag...other end were bbs are loaded it looks like bottom should come off but dont want to break it for him...tried to upload pics but its saying file too big!

 
asadunkley said:
It has no pronounse wheel on mag to wind if anything is sunken in mag...other end were bbs are loaded it looks like bottom should come off but dont want to break it for him...tried to upload pics but its saying file too big!
Click to expand...
Click to shrink...
use photobucket or imgur. AFUK has weird file size limitations

 
Ok, I just looked up the gun and the wheel is on the bottom of the mag and doesn't seem to protrude very much at all.

 
Or is it that i have to pull bottom off mag?..but carnt work out how it pulls off?

 
If it has a wheel it should need winding

Not being funny what does manual or website say ?

Old chubby JamWow normally gives a review

And demonstrates in his professional way how to load the mag with 75% of bbs dropping on the floor

The wheel should have slight teeth on it

To help with winding

Think M4's wind forward

&

AK's wind back but this depends which way you view the magazine itself so to speak

You fill the mag or at least half full

BB's won't appear at top until you wind

Keep winding ratching up the tension

Until it clicks

This is common user error an understanding of how mags work

Wind it up, place in gun, wind a bit more

 
just goodled this gun to see just what mag you get out of the box, and it looks like you dont get a high cap mag as standard, just a mid cap one so there won't be a winder to wind.

let us know if you bought an extra mag or not.

can you post a pic of the top of the mag as well?

 
Last edited by a moderator:
You must log in or register to reply here.

Similar threads

F
Well pro we23 mini upgrade help.
Replies
0
Views
8
frazer900
F
Back
Top