Gun picture thread
- Thread starter M_P
- Start date
Mack
Members
- Jun 24, 2012
- 1,155
- 1,030
Id love a dusted paint job on it I just dont have the cajones to do it
Not badjust needs a dirty paint job
Monty
Retired Moderator
- Apr 22, 2012
- 2,846
- 1,407
My Marui's. M16's a bit creaky, but it works.
View attachment 7604View attachment 7605
View attachment 7606View attachment 7607
View attachment 7604View attachment 7605
View attachment 7606View attachment 7607
Last edited by a moderator:
AirsoftTed
AF-UK patch owner
- Sep 30, 2012
- 1,004
- 664
G&P M16A3
G&G CM16 carbine
Ragemelon
Members
- Mar 2, 2013
- 40
- 12
TheFull9
Supporters
- Dec 17, 2011
- 3,581
- 2,353
So here's the LM4 I picked up last December, finally managed to get 95% of the parts I wanted together along with all the necessary tools.
Took this just as I finished rethreading the upper in order to fit the Midwest Industries tube.
Just need to get a light mount and finish work on the bolt catch to fit the BAD and it'll be 100%.
Took this just as I finished rethreading the upper in order to fit the Midwest Industries tube.
Just need to get a light mount and finish work on the bolt catch to fit the BAD and it'll be 100%.
jcheeseright
Supporters
- Jun 14, 2012
- 4,280
- 2,261
oooh, going down the GBB route, let me know how it does for general skirmishing; I'm completely in love with my MP7 GBB but reticent to pick up a larger rifle for reasons unknown to even myself!
TheFull9
Supporters
- Dec 17, 2011
- 3,581
- 2,353
Well I've owned the LM4 for about 6 months now, not really used it apart from a bit of plinking but the magazines have no issues at all staying gas tight. Unlike the 11 x G&P WOC mags I owned for about 2 years before switching over to the KWA platform, which were nothing but an enormous splooging of money down the drain, every single one.
The good thing KWA did with their rifle is look at the various systems already on the market and properly think about which areas need to be beefed up/altered and parts made of decent steel. I believe It's the newest of all the GBB AR-15s (possibly excluding the weird new G&G that's rather unrealistic), and it really shows. Soon as I take it to a game I'll let you know how it performs.
The good thing KWA did with their rifle is look at the various systems already on the market and properly think about which areas need to be beefed up/altered and parts made of decent steel. I believe It's the newest of all the GBB AR-15s (possibly excluding the weird new G&G that's rather unrealistic), and it really shows. Soon as I take it to a game I'll let you know how it performs.
SheriffHD
Members
- May 27, 2011
- 814
- 100
Well, new pistol came yesterday, and new paints came today. So as I started to sand down the slide, I noticed how fucking awesome it made the gun look. Half tempted to just keep it like this.
Edit:
Repainted it all now, I think the worn look was nice. But the black/gray two tone is better.
Edit:
Repainted it all now, I think the worn look was nice. But the black/gray two tone is better.
Last edited by a moderator:
Black Death
Members
- Jun 5, 2012
- 209
- 202
me likey very muchWell, new pistol came yesterday, and new paints came today. So as I started to sand down the slide, I noticed how fucking awesome it made the gun look. Half tempted to just keep it like this.
Edit:
Repainted it all now, I think the worn look was nice. But the black/gray two tone is better.
jcheeseright
Supporters
- Jun 14, 2012
- 4,280
- 2,261
seconded, would remove the need for that lonely MBUS you've got up front there too!
TPI
Supporters
- Apr 23, 2011
- 2,138
- 40
My ICS L85A2 & KWA Glock 19
I Didn't want the L85 to look too British Military, You may Remember that Brief Chat Ed:
so i Stuck the wrong FH on (From an M4 i think?)
Avoided the Grip Pod (Regretably I'm considering getting one
)
said no Thanks to the Light/Laser Block and stuck an Ultrafire on (It's second hand & Obviously a Clone of something but i cannot put my finger on what for just now)
Next Steps are:
Machine a Couple of Mounts to put a Dr Red dot on the Elcan (Variable Zoom i may Add!)
some of those Fancy looking MagPul XTM's (Black & OD)
Obviously a new Torch Mount
Grip pod (OD if i can find one if not Black will do)
The Glock 19 is Painted By our Very Own Junior in a Green Multicam,
It's Rocking a Standard Glock Front sight and a Fi Dragon Green Rear Sight
Next Steps Are:
+1 Mag to make 3
Crye Precision Gun Clip (Tan)
Streamlight TLR1 (i think their called?)
Custom Machined Muzzle Break attachment (Like the Zombat but for a Glock and allowing the TLR to still mount on)
and then it will go back to Sam to be repainted in a Green MC again
and yes It IS Engineered to be Different for now.. (I can hear Optimus Prime doing the speech at the end of Transformers1 in my head and i've only seen it 3 times!)
I Didn't want the L85 to look too British Military, You may Remember that Brief Chat Ed:
so i Stuck the wrong FH on (From an M4 i think?)
Avoided the Grip Pod (Regretably I'm considering getting one
said no Thanks to the Light/Laser Block and stuck an Ultrafire on (It's second hand & Obviously a Clone of something but i cannot put my finger on what for just now)
Next Steps are:
Machine a Couple of Mounts to put a Dr Red dot on the Elcan (Variable Zoom i may Add!)
some of those Fancy looking MagPul XTM's (Black & OD)
Obviously a new Torch Mount
Grip pod (OD if i can find one if not Black will do)
The Glock 19 is Painted By our Very Own Junior in a Green Multicam,
It's Rocking a Standard Glock Front sight and a Fi Dragon Green Rear Sight
Next Steps Are:
+1 Mag to make 3
Crye Precision Gun Clip (Tan)
Streamlight TLR1 (i think their called?)
Custom Machined Muzzle Break attachment (Like the Zombat but for a Glock and allowing the TLR to still mount on)
and then it will go back to Sam to be repainted in a Green MC again
and yes It IS Engineered to be Different for now.. (I can hear Optimus Prime doing the speech at the end of Transformers1 in my head and i've only seen it 3 times!)
Last edited by a moderator:
SimonQuigley
Members
- Mar 20, 2013
- 386
- 151
Just finished pimping my Dboys M4. pics to come
Zak Da Mack
Members
- Nov 30, 2012
- 926
- 406
So, now that school has finally finished, I decided to get off my arse and tape the stock of my rifle in Flecktarn. It looks sooo much better now. (note: I sheared off the front screw by accident a while ago, so the paracord at the front is holding it at the front.) The scope also needs redoing.
View attachment 7914
View attachment 7914
Last edited by a moderator:
Similar threads
