Gun picture thread

[TacMaster]

Sliding stock is the best on the MP5. It's one of the main advantages of the MP5 for CQB, as well as looking damn good.

 

[airsoftwarrior147]

Ok, as I've got an mp5sd6? Full stock at the moment but only use it for cqb anyway, it alters between that and my m4 so I figured might be best. Just got to learn how to rewirw it.

Final question- how the hell do you a) take the fire selector off and mp5 B) get the gearbox out

 

[TacMaster]

There should be a hex bolt on one of the fire selectors, probably on the bottom of it. Undo that and you can take that one off, and pull the other (with the connecting bar) out.

As for the gearbox removal:

1. Remove the motor plate
2. Disconnect the motor
3. There should be 2 screws on the inside on the plastic dividing wall between the gearbox and the motor cavity. These need to be undone
4. Lift the gearbox out

There may be a couple of other screws you need to remove before taking the GB out and it could vary per model- I was used to my old CYMA MP5A5 and I haven't had that for a while.

 

[THE FNG]

'The negotiator'

View attachment 13351

And the rest of my current arsenal...

View attachment 13352

SCAR-L CQC w/EGLM

MP9A3

FN 5-7 x2

 

[airsoftwarrior147]

Thanks tac, will have a look tommorow

 

[joshcowin]

Cheers chap, a couple more....

that m14 though

 

[Lozart]

Ok, as I've got an mp5sd6? Full stock at the moment but only use it for cqb anyway, it alters between that and my m4 so I figured might be best. Just got to learn how to rewirw it.

Final question- how the hell do you a) take the fire selector off and mp5 B) get the gearbox out

If it's a fixed stock, it's not an SD6. Fixed stocks are either SD2 (SEF trigger group) or SD5 (ambi trigger group). The SD6 is a sliding stock and ambi trigger group version.

 

[JamesAirsofterAgent]

Why you make me so jealous with more!!!!!!!!!!!!!

 

[airsoftwarrior147]

Lozart thanks

 

[airsoftwarrior147]

Just took delivery of my 11" troy ras, will try and fit it then out tm some pictures up

 

[snoopholy]

Pft, counting the failed attempt at one <_< probably near £1000 the one pictured was around £500 on it's own, not got the Diemaco body, just the stock ca metal one, hence paintjob to cover the m15a4 trades

Sorry, bit off topic, were can i get some of the netting that the gun is laying on, wanting some to camo my scope up.

Cheers Dave

 

[GiantKiwi]

Continuation of the work on the WE -

Stock WE bolt works better than the RAT PoS in the UK, however I decided, it 1) is Ugly as sin, 2) could be a whole load better.

So, tonight I started the process of polishing it -

1st Stage -

And in situ -

Already cycles considerably better, and SHINY.

 

[Qlimax]

Don't know which to have on my SMP. ICS QD Silencer or Diablo flash hider.....

 

[Airsoft_Mr B]

Don't know which to have on my SMP. ICS QD Silencer or Diablo flash hider.....

I'd say the suppressor

 

[Qlimax]

I'd say the suppressor

was thinking that as well. The diablo does look good though

 

[Monty]

Qlimax your M4 looks insane, how did you do the Shock & Awe engraving on the side? Or is it a decal?

 

[Josh95]

I would personally prefer just a normal M4 style flash hider, I have to say however the gun does look very impressive

 

[Qlimax]

I would personally prefer just a normal M4 style flash hider, I have to say however the gun does look very impressive

Qlimax your M4 looks insane, how did you do the Shock & Awe engraving on the side? Or is it a decal?

Take the silencer off and its a standard flash hider but on an SMP the silencer makes it even more quite.

the SAA on the side is a vinyl I've made as a test to see how it looks.

 

[joshcowin]

Don't know which to have on my SMP. ICS QD Silencer or Diablo flash hider.....

very nice build mate kudos

 

[Qlimax]

very nice build mate kudos

Thanks man, cost a pretty penny in the end. It has been worth it just a shame it's two colours lol so had to try even it out