• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Gun picture thread

18airsoft were extremely lovely about the fact that my E&C SAI G34 wasn't working out of the box and sent a replacement hammer assembly free of charge. Threw on a 'we have a RMR cut at home' special and this thing's looking sweet and shooting good all the same. Looking forward to playing with the inner barrel and hop stuff when funds permit

JoATlhy.png


 
Well it's not going to win any beauty contests, or shooting contests but it works reasonably well now.

All it needed was...

New Gearbox (complete)

New motor

New grip

New ejection port cover(still doesn't bloody close tho)

New receiver pin (tbf I found the catch for the original pin when I removed the old gear box)

I forgot to add... a new hop unit too.

Still want a gas tube for it (rarer than hens teeth apparently)

View attachment 150761

View attachment 150762

View attachment 150763

 
Last edited by a moderator:
ButcherBill said:
Well it's not going to win any beauty contests, or shooting contests but it works reasonably well now.

All it needed was...

New Gearbox (complete)

New motor

New grip

New ejection port cover(still doesn't bloody close tho)

New receiver pin (tbf I found the catch for the original pin when I removed the old gear box)

Still want a gas tube for it (rarer than hens teeth apparently)

View attachment 150761

View attachment 150762

View attachment 150763
Click to expand...
I'm the opposite I want the cover open with a real looking catch ? , I'm sure I have a cyma a1 full upper and it has a gas tube I will try and dig it out 

 
ButcherBill said:
Is this the AR57 I sold you?
Click to expand...
It is. I had to drop the spring down to a M110 to get it inside the limits. No idea what it came stock with. The hop unit is a bit strange, it's like a M4 and P90 hop put together and the inner barrel has a fair bit of movement even when assembled so I pushed an O-ring into the space between the hop unit and the inner barrel to hold it a bit more secure. I had to glue the nub to the hop arm as it kept getting stuck in place when winding the hop off. Gearbox looks to be a standard V2 but without a quick change spring and all the internals appear pretty much standard except the nozzle which is a long brass thing. Really should have measured it. Not sure what's going on with the rails on this - I had to really force the angled grip on and my KAC style rail covers just will not fit at all - it's like the rails are ever so slightly wider than all my other RIFs.

The mock charging handle is a bit loose because the spring is about 3-5mm too short so it has some play. I have no idea how to take that apart so it's staying as is for now.

 
Last edited by a moderator:
MrTea said:
It is. I had to drop the spring down to a M110 to get it inside the limits. No idea what it came stock with. The hop unit is a bit strange, it's like a M4 and P90 hop put together and the inner barrel has a fair bit of movement even when assembled so I pushed an O-ring into the space between the hop unit and the inner barrel to hold it a bit more secure. I had to glue the nub to the hop arm as it kept getting stuck in place when winding the hop off. Gearbox looks to be a standard V2 but without a quick change spring and all the internals appear pretty much standard except the nozzle which is a long brass thing. Really should have measured it. Not sure what's going on with the rails on this - I had to really force the angled grip on and my KAC style rail covers just will not fit at all - it's like the rails are ever so slightly wider than all my other RIFs.

The mock charging handle is a bit loose because the spring is about 3-5mm too short so it has some play. I have no idea how to take that apart so it's staying as is for now.
Click to expand...
It was shooting hot for me but I'd only ever chrono'd it so assumed it was a tight spring due to zero use. Hope you're happy with it, looks great with the changes, did you empty the Pmag for the battery or reroute the wiring?

Think I'd only ever fitted an RDS to the top rail so can't comment on the rest of them.

I remember watching Forgotten weapons vids about his AR57 & apparently the RS charging handle was dodgy... I should have charged more for the realism ?

 
Last edited by a moderator:
ButcherBill said:
It was shooting hot for me but I'd only ever chrono'd it so assumed it was a tight spring due to zero use. Hope you're happy with it, looks great with the changes, did you empty the Pmag for the battery or reroute the wiring?

Think I'd only ever fitted an RDS to the top rail so can't comment on the rest.
Click to expand...
Yeah was shooting at 400fps when I first tested it.

The mag was just a spare high cap I had laying around so I pulled the internals out and superglued the pin back in to give some rigidity to the top of the mag. Wiring is still into the mag as it's just the better place for it tbh. If I wanted to make the profile smaller, I could get a short mag and put a peq box size battery in there.

 
You must log in or register to reply here.

Similar threads

andersson
G&G L85a2 upper receiver jumps out of alignment
Replies
1
Views
237
ButcherBill
ButcherBill
S
VFC BCM MCMR GBBR and VFC PRO FORCE Sig MCX
Replies
0
Views
491
StayOnTarget
S
Zarrin
Asian retailer Checkout w/ over 50% of RIF externals
Replies
5
Views
1K
Bnjemann
Bnjemann
Dogsbody100
Upgrading a Well MB 01
Replies
3
Views
645
Rogerborg
Rogerborg
sam_91
Hey All , new to this forums but not new to Airsoft
Replies
1
Views
925
ButcherBill
ButcherBill
Back
Top