Gun picture thread

[Enid_Puceflange]

TM Desert Warrior now with added clone XC1.

Vorsk VX-9  Grips en route to pimp it up a bit.

Looking to change the sights next ......

Specna Arms SA-C02. As externally pimped as I want it .... for now. ?

View attachment 139112

View attachment 139113

Cut bike inner tubes make good Ranger bands, and free from your local bike store if you ask for an old bust one ?

 

[Hellfish]

Cut bike inner tubes make good Ranger bands, and free from your local bike store if you ask for an old bust one ?

I'm a commuter cyclist ... acquiring bust inner tubes is not a problem ?

 

[Barry Sayer]

KWA qrf mod 1.......

With tracer unit and double mag clip.

Bit of a overkill with the holo and magnifier....thoughts ?

View attachment 139179View attachment 139180View attachment 139181View attachment 139183

 

[TheFull9]

Bit of a overkill with the holo and magnifier....thoughts ?

Doesn't matter what shape the mag is there's always a 6mm coming out, so if it works then crack on.  As a speccy-four-eyes I say stick a massive 20x scope on an MP5k if you like.

 

[Barry Sayer]

Doesn't matter what shape the mag is there's always a 6mm coming out, so if it works then crack on.  As a speccy-four-eyes I say stick a massive 20x scope on an MP5k if you like.

? yep I'm a speccy-four-eyes too. I don't wear my specs when shooting so the 3x magnifier works a treat ?

 

[Anonymoose]

Bit of a overkill with the holo and magnifier....thoughts ?

All that matters is it works for you. I have a 4x sight and a red dot mounted at 45° on mine.

View attachment 139208

 

[BigAl]

WADSN X300U arrived today alongside a CO2 mag with the cool baseplates, so I took a few neat pictures.


 ​

Just need to cough up the pennies to send the slide & frame off to West Laser to get engraved and cerakoted and it'll be pretty much done aethestics-wise. 

What make is that mate, is it the SRC?  Thats the only CO2 one i'm aware of.  If it is is it compatible with any other makes?

 

[pyromancer6]

What make is that mate, is it the SRC?  Thats the only CO2 one i'm aware of.  If it is is it compatible with any other makes?

Yup bud, the SRC - it's just a TM clone with a metal slide & support for CO2 mags. It's really fun to shoot but the QC is a little iffy because the second one I got in for a friend doesn't reliably lock back (and the co2 mag's threads are made of cheese and got fucked the first time I tried putting a bulb in, so I just bought him a gas mag because I felt bad)

I tried to return it but the retailer went 'nope it's your fault' because of the mag (which was my fault tbh) even though there's something actually wrong with the slide catch getting stuck and not locking back, so just be a little precious with it just in case you lose the QC lottery so you can return it properly lol

Currently waiting on a H/I key & ML barrel to be back in stock on empire and I'll pop that in to see if it's a little more performant - the USP9 unfortunately doesn't get much love with regards to aftermarket and finding any info on them is a pain in the ass (which is why my poor VFC lays broken in a pistol case, zero info online about it apart from retailer listings of them)

 

[bladerunner168]

VFC Glocks

View attachment 139273

View attachment 139274

View attachment 139275

View attachment 139276

 

[Impulse]

Not quite finished, but it'll do for now. I need to do a Brownells order to get a magpul angle grip, bipod and QD sling point, all m-lok direct mounts, but for now a few picatinny segments and the accessories from my mk12 MWS will do the job.

At a glance it doesn't even look like an HPA gun. Alas, the 3d printed tournament lock on the "buffer tube" and the MTW markings are what gives it away  

View attachment 139479

 

[The_Lord_Poncho]

View attachment 139479

Given the amount of airsoft gubbins under that bed, it looks like you would be able to remove the bed frame without the mattress moving!

 

[Impulse]

Given the amount of airsoft gubbins under that bed, it looks like you would be able to remove the bed frame without the mattress moving!

If there weren't weird legs because it's a futon, I probably could! Under there is... a Cyma SR-25, a TM VSR, an Evolution m40a3, a TM NGRS 416D and a Cyma springer breacher shotgun, as well as the empty box for my SRS and a bunch of spare VSR parts. I live in a very small room with way too much airsoft stuff and no space for it all   

 

[mightyjebus]

Tokyo Marui Hk417 redone as a G27K. This took a bit of work but happy with the result.

View attachment 139605

View attachment 139606

Parts list:

TM HK417 NGRS with Titan, madbull inner barrel and 4uantum friction pro hop rubber and nub.

Airsoft Artisan G27K handguard

some random front sling loop thing

Ultima industries HLOK side rails (74mm)

2 inch barrel extension as the Airsoft Artisan extension doesn't like the TM threads on the flash hider

TM HK fat grip (I've got a real one here, just need to find it!)

HAO HK curved trigger guard (need to paint)

Ares HK flip up rear sight

Freedom Art Hk417 sling mount

VFC GBB Slim 417 stock heavily modified to fit the TM stock tube and take a lipo.

 

[Barry Sayer]

Thought I'd tidy the case up, it's got the wave foam so flipped the bottom layer upside down and start hacking away at it to suit my smg, mags, couple of batteries & pistol, job done.View attachment 139737View attachment 139738

 

[TheFull9]

Took me hours of work to get from the top to the bottom.

View attachment 139745

 

[Anonymoose]

Took me hours of work to get from the top to the bottom.

View attachment 139745

Got it - you rotated the sling loop. ?

 

[Hellfish]

TM Desert Warrior with XC1 Clone and Vorsk VX-9 Grips 

View attachment 139810

 

[KacperQQ]

??

View attachment 139871

 

[JinxDuh]

??

View attachment 139871

Snap! Kind of ?

 

 

[Lofty]

Marushin Nambu Type 14

View attachment 139912

View attachment 139913

View attachment 139914

View attachment 139915