• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Gun picture thread

I bought a Krytac Alpine Vector from a fellow in these forums about a month back. Since then I've taken the gun, gutted it out and upgraded almost everything internally myself. Now shoots like a total beast and sounds great too! It was the first time I teched a gun, can't wait to take it to a game next weekend.

I... hope this scope doesn't look too big?

View attachment 114785

 
Last edited by a moderator:
@Lozart i need to keep that on for now until i can get a HK PDW folding stock mate and an 11.1 lipo ak battery to run in it to fit inside the body not the stock

 
Last edited by a moderator:
Adenley said:
After years of searching I somehow managed to stumble upon this wonderful TM Aug A1 with the steel HBAR kit with the correct bipod and flash hider. Not sure how rare these kits are but I’ve only come across a small hand-full of these.
Click to expand...


They are rare. I've only ever seen one for sale; I bought it and had it modified to 14mm CCW to fit my GHK. Incidentally, I still have the original, unmodified 16mm CW barrel stub from mine - if you want that as a spare, or to put on another AUG or something, just drop me a PM.

​



It was done by cutting a Hephaestus steel outer barrel down - each bit is full steel, including the gas block.

 ​

​

S, M, XXL​



Not sure why I insist on waiting until I'm selling something to take decent pictures of it, but all three bits (the pistol, the light, the holster) of this slice of 2000s Navy SEAL life are sadly for sale.

CKj7Ak3.jpg

 ​

k8xkNBj.jpg

 ​

T5RBUIR.jpg
 
Last edited by a moderator:
MWS mostly done. Will eventually replace the repro CTR stock with a real-steel Magpul one and will probably get a Visionking scope for it to replace the Strike Systems one on it at the moment. Might get a 45 degree mount for a red dot for close shooting, but we'll see.

Also, with the suppressor off and the stock all the way in, it fits in the smaller rifle pouch of my larger gun bag, so I can take both it and one of my (many) bolt actions in one bag now :D

View attachment 115349View attachment 115348View attachment 115347

 
Valken ASL are the standard rental at NTAC, my local outdoors site, and what played my first three games with to get my UKARA. They're half-decent and run well. They really need a bucking/nub upgrade to be competitive.

 
Last edited by a moderator:
@MrTea funnily enough,being a rental gun is how i got mine! The site i play at use them and i was asking questions about it as it seemed like a good starter rif. Turns out one of the otheres there had bought s mew one but not used it a lot, so a deal was done. ?

I did strip it down a couple of nights ago and saw that there is only a flimsy ring between the barrel and hopper. Its been added to the top of my shopping list! Lol

 
Duff Beer said:
Now with the RDS on the Elcan, and proper Grip Pod System grip.  C’est fin!
Click to expand...
Question about your flash hider, I have one of those Airsoft Artisan ones and only just got around to putting it on the G&G L85... where the outer barrel isn't threaded. The standard flash hider just slides on and there's a pin that secures into a groove on the outer barrel.

Are G&G doing strange things with their L85A2 and do the ICS ones have a threaded barrel?

 
Last edited by a moderator:
Hobbnob said:
A couple of my MWS's, top is a colt 723 with a Nova receiver, VFC Ops Inc suppressor and a few other bits and pieces for a 90's delta build, and the second is an M16A4 as seen in its transitional era during the Iraq war
Click to expand...


Open dust covers ?

Seriously though, love them. Especially the longboi! Not enough people run long MWS builds

 
Impulse said:
Open dust covers ?

Seriously though, love them. Especially the longboi! Not enough people run long MWS builds
Click to expand...
Thanks! They used to be unicorns but there was actually a point a year or two ago that it was possible to build one, I'm very lucky to be benefitting from that :)

(Edit: unless you use angry gun, but everyone should know how that will go :P  )

I'm thinking of doing a C7 or MK12 Mod 0 build at some point in future but it'll be a while before parts availability and budget lines up

 
Last edited by a moderator:
Hobbnob said:
A couple of my MWS's, top is a colt 723 with a Nova receiver, VFC Ops Inc suppressor and a few other bits and pieces for a 90's delta build, and the second is an M16A4 as seen in its transitional era during the Iraq war

View attachment 115522
Click to expand...
That M16 is a dream, I have to build one ? Do you happen to have a parts list floating about? Excellent job

 
Hobbnob said:
Thanks! They used to be unicorns but there was actually a point a year or two ago that it was possible to build one, I'm very lucky to be benefitting from that :)

(Edit: unless you use angry gun, but everyone should know how that will go :P  )

I'm thinking of doing a C7 or MK12 Mod 0 build at some point in future but it'll be a while before parts availability and budget lines up
Click to expand...


I try to avoid Angry Gun parts like the plague as I have heard there are... issues :D . I did an m16a4 build with G&P AEG parts, but recently swapped out for MK12 Mod 1 parts (posted it a bit further up) and it has firmly cemented its spot as my go-to non-bolt action rifle. I absolutely love the aesthetic of it!

 
MILITATED said:
That M16 is a dream, I have to build one ? Do you happen to have a parts list floating about? Excellent job
Click to expand...
Thanks! The essentials for the M16 are:

G&P 20" steel WA system outer barrel, with unknown brand WA-MWS adapter

G&P front end furniture (M203 heatshield, M5 RAS, I have a standard A2 handguard too but not sure who that's from)

I believe this is a DNA barrel nut, it's definitely not the normal TM one. The person I bought the nut from among other things mentioned that the 203 won't work with the standard barrel nut, it seems like that screw gets in the way

MWC Stock kit. These are built to MWS spec and have large spacers inside, so you can use a carbine buffer inside rather than having to switch out to a rifle length buffer. No weight difference, just saves a bit of faff when finding parts

The 203 is believed to be a king arms, I have a G&P as well and consider the king arms superior because the tube rails have a detent at the end of travel so it holds open as long as you want it

The ACOG is holy warrior, I'm not sold on it currently compared to the G&P repro I used to have but I also don't have enough time with it to say for certain.

I don't believe the UID is correct for an A4 of this era, but this receiver gets passed around a lot of builds and it links to a google doc with info such as current chrono/npas setting, what the hop is set for, whether it's had any recent issues to keep an eye out for etc

Impulse said:
I try to avoid Angry Gun parts like the plague as I have heard there are... issues :D . I did an m16a4 build with G&P AEG parts, but recently swapped out for MK12 Mod 1 parts (posted it a bit further up) and it has firmly cemented its spot as my go-to non-bolt action rifle. I absolutely love the aesthetic of it!
Click to expand...
I'm a fan of the MK12 but I have a VFC M110 for my quad rail DMR fix, I still want a mod 0 though at some point XD

Angry gun are not that bad but you really have to temper your expectations, if it's something with threads or any precise machining like a bolt then you have to understand they don't have a great sucess rate. Stick to simple things like buffers though and they're fine, and I've seen angry gun bolts that lasted almost a whole day before as well. It was broken by lunchtime but the fact it actually fit in the gun, didn't break itself apart when testing at home, got through chrono and then played a couple hours of games is quite impressive for angry gun.

Fwiw I've heard that their receiver/front end kits can be workable too if you're alright with a dremel, but I wouldn't personally chance it

 
You must log in or register to reply here.

Similar threads

andersson
G&G L85a2 upper receiver jumps out of alignment
Replies
1
Views
236
ButcherBill
ButcherBill
S
VFC BCM MCMR GBBR and VFC PRO FORCE Sig MCX
Replies
0
Views
490
StayOnTarget
S
Zarrin
Asian retailer Checkout w/ over 50% of RIF externals
Replies
5
Views
1K
Bnjemann
Bnjemann
Dogsbody100
Upgrading a Well MB 01
Replies
3
Views
644
Rogerborg
Rogerborg
sam_91
Hey All , new to this forums but not new to Airsoft
Replies
1
Views
924
ButcherBill
ButcherBill
Back
Top