• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Gun picture thread

So I have a how it started Vs how is it going post. 

I recently picked up a sportsline is (thanks @HuttArmouries) so, being a shiny new toy I loaded it up with attachments and took it to a game. Crono was, disappointing coming in lower than expected. No drama I thought and for tacticool reasons I left them on for the first game. Soon discovered that is a lot of extra weight! So at the first break it all comes off in exchange for the hand rail irons. And I folded the stock...

But all is good, once I have figured out how my nonworking on comes apart (well, finding a small enough hex key) get it back together and working, this one will also come apart and I shall "trouble shoot" 

Had a lot of fun with it and I'm even considering taking the stock off all together 

View attachment 107526

View attachment 107527

 
Where it all started in the mid 90's, there were more but I surrendered them all to the police after the Dunblane massacre.

View attachment 107549

& Where my collection is now, replicas, props & airsoft (mainly AEG's) with room for more. Forgot I have a G36, Scar & a Glock 17 packed up for a skirmish in early June. I've also got manequins ktted out with Uniform & Pattern 58 webbing (styled as how I wore it in the TA in the early 90's), one with PLCE etc from the 2000's, one with DDPM from the 2010's & a growing collection of webbing from pattern 58 to modern day including bergens.

View attachment 107550

View attachment 107551

View attachment 107552

View attachment 107553

 
Last edited by a moderator:
Jaylordofwaargh said:
[Snip] Crono was, disappointing coming in

[Snip] Had a lot of fun with it and I'm even considering taking the stock off all together 
Click to expand...


5x ICS M4 owner here. Older CS4-based ICS guns have M90/95 springs and downgraded motors (to prevent over-spin) for the UK market. They were also produced in an era when many sites operated a 328fps limit so sub-300fps was the 'standard' out of the box for them. 

A few of mine needed spring replacements (I use XT M100 or M105 from @ak2m4 depending on barrel length) and replacement of the compression seals. A doddle with the split gearbox - there's a reason I have 5.

I would also suggest replacing the Piston and Piston head at the same time - full metal rack is the way to go with these guns due to AoE - which is a 'thing' with ICS and the stock plastic pistons - AoE correction is trickier compared to a 'normal' GB due to the split design. I just throw in a full-metal rack 14 tooth piston and call it done.

It would also be a good idea to pickup a few tappet plates from @HuttArmouries as they can be a bit weak on the older guns - although i haven't killed one yet. 

Going stock-less of a lot of fun, my CXP-15 was run like that for over a year. You can get a QD receiver end cap from Fire-Support that replaces the stock extension on the receiver (ICS-MA-86).

 
You must log in or register to reply here.

Similar threads

andersson
G&G L85a2 upper receiver jumps out of alignment
Replies
1
Views
240
ButcherBill
ButcherBill
S
VFC BCM MCMR GBBR and VFC PRO FORCE Sig MCX
Replies
0
Views
493
StayOnTarget
S
Zarrin
Asian retailer Checkout w/ over 50% of RIF externals
Replies
5
Views
1K
Bnjemann
Bnjemann
Dogsbody100
Upgrading a Well MB 01
Replies
3
Views
646
Rogerborg
Rogerborg
sam_91
Hey All , new to this forums but not new to Airsoft
Replies
1
Views
927
ButcherBill
ButcherBill
Back
Top