• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Gun picture thread

 Collecting for quite a while now, still happy as a child, when I get my hands on something rare - in this case, the happyness is accompanied by something like awe, as it doesn't get much rarer than this
263a.png


Tanaka Colt SAA Casyopea (which already is rare as hell in and of itself, as these were banned in Japan together with their Casyopea counterpart, the S&W M500)

with a Prime CNC Brass Kit (possibly the only brass kit for Casyopea in existence, either a mod of a Pegasus brass kit, or Prime has begun to build one of these, but stopped when the Casyopeas were banned in Japan).

The loading breach is black, as are the hammer and the trigger. Might be, that Prime stopped production midway... or maybe a modder lost interest to go full monty...

So this might be a real one-off, in this configuration possibly the only one of its kind.

Build quality is extremely high, of course, and it has a very nice, authentic weight of 1.030g. The Casyopea shells are a lot of fun.

Really pretty enthusiastic about this one ?

tanakacoltsaacasyopea10kap.jpg


tanakacoltsaacasyopeaorjsz.jpg


 
It's almost complete.

I need to swap the wilcox for a black one, dremel the BCM gunfighter foregrip to fit on the rail properly (PMM rails), figure out how to get a battery in that stock, get a better torch, and modlite buttons for the torch/dbal. Total cost on this gun so far is around £3k

View attachment 78829

View attachment 78830

With a warhead motor and good shimming it's quite tap tap tappy.

 
Last edited by a moderator:
The new TM NGRS mp5. Had my first game last Sunday with it and as with all TM guns it obviously shoots amazing out the box but with the new MOSFET system, just a huge improvement on trigger response and no lock ups on semi which essentially saves the need for a titan. Trigger pull is short which is nice with good spring tension and the fire selector has a firm click and no play between each setting which is unlike any other AEG mp5 unless your lucky enough to have a TW5.  Converted to a SD straight out the box as that's my preferred mp5 variant. I jubilee clip a lower kac rail with a stubby tango grip and looking at sourcing a eotech for the devgru look. As my user name suggests I love mp5s grew up seeing them in films and TV shows, I normally run a MWS as performance wise it's hard to beat but the build quality and performance of the mp5 is outstanding so I bumped the FPS up out the box so its now up there with the MWS and I personally feel like the MWS will start gathering dust now ha.

View attachment 78917

View attachment 78918

 
The only thing I don't like about this release is I'm now worried they'll update the recoil line of ARs and the ones I already own will suddenly feel quite obsolete lol.  I am stoked to get my MP5 next week though, I think this is TM's best release in a long time and I like a lot of what they do.

My personal preference isn't the SD aesthetic but I'm sure a lot of people out there will want to know what brand SD handguard and suppressor you have on there so they can make their own.

 
TheFull9 said:
The only thing I don't like about this release is I'm now worried they'll update the recoil line of ARs and the ones I already own will suddenly feel quite obsolete lol.  I am stoked to get my MP5 next week though, I think this is TM's best release in a long time and I like a lot of what they do.

My personal preference isn't the SD aesthetic but I'm sure a lot of people out there will want to know what brand SD handguard and suppressor you have on there so they can make their own.
Click to expand...
It would make sense to replace the older NGRS ARs with the new MOSFET and I totally get what you mean too haha.

I already built my own NGRS mp5 before TM announced their own version which I've kept in the original A5 configuration with a magpul guard, Was actually easier to convert the TM version to a SD nothing is made of steel so easy to work with.

Parts wise you need.

SD front sight 

Guard and sleeve 

Suppressor

I used ICS parts but they are discontinued so it was hard sourcing everything. 

Your'll need some 35mm steel bar and a lathe for the adapter I made. Also be confident with a Dremel and tap and dye set. 

 
GothicGhost said:
Now that is sweet.

I love my MTW but this is just so much nicer to look at :D
Click to expand...
The KJ Works base gun will fit in basically any real Ruger 10/22 stock with gentle persuasion so there’s loads you can do with them cosmetically. 
 

It would make the perfect accoutrement to your MTW. Join us 

example- this guy has basically completed KC02ingView attachment 78939

One of the most awesome and unique KC’s was fielded at the NAF a few weeks ago. It’s a lever action, bolt action limit, hogue-stocked and custom electronic’d masterpiece wielded by an OG Saustrich. Hell, it even had its own promo video 



 
Last edited by a moderator:
My AEG....

Specna core, then made a few upgrades which I'm not sure made any difference!:

Shs metal hop up 

Shs nozzle and cylinder

Maple leaf hop up rubber

Eotech replica

View attachment 79206

 
12wdwjv.jpg


inapmXW.jpg


My SCAR-H I'm calling the 'Broadsword'. I just need a new torch, and a couple of unity mod buttons for the dbal/torch and it's finally finished.

 
You must log in or register to reply here.

Similar threads

andersson
G&G L85a2 upper receiver jumps out of alignment
Replies
1
Views
246
ButcherBill
ButcherBill
S
VFC BCM MCMR GBBR and VFC PRO FORCE Sig MCX
Replies
0
Views
500
StayOnTarget
S
Zarrin
Asian retailer Checkout w/ over 50% of RIF externals
Replies
5
Views
1K
Bnjemann
Bnjemann
Dogsbody100
Upgrading a Well MB 01
Replies
3
Views
659
Rogerborg
Rogerborg
sam_91
Hey All , new to this forums but not new to Airsoft
Replies
1
Views
937
ButcherBill
ButcherBill
Back
Top