Gun picture thread

[Optics]

What is that pistol next to the P-09? I really like it

It's the ICS BLE XFG ... got it for £50 from JD airsoft in the xmas sale. Think its still available.

 

[Tec-Spek]

Added a surefire M720v to the WE M4, Wasn't sure at first but its growing on me.

View attachment 52440

 

[Steveocee]

View attachment 52465

 

[EDcase]

OK, Some here are going to hate this but I don't care as I'm happy with it ?

After some surgery... (and a little swearing)

View attachment 52658View attachment 52659

A Double Eagle SPAS joined at the hip with an M870 (CYMA CM352) stock

Amazingly it works very well ?

 

[SSPKali]

The only acceptable short barreled AR

View attachment 52367

Games Workshop called, they want their Bolt pistol back ???

 

[MagpieTactical]

Got its first run out this weekend just gone. Range was OK, and I am obviously spoilt by etus and rof on the arp566 but enjoyed using it. Got some good kills. 

Fitted a zci tight bore barrel and a prommy purple bucking to it this morning View attachment 52780

 

[Guest]

Well, it took all day, but I no longer own an Alpine Krytac AEG Vector.

I now own an Alpine KWA GBB Vector ?

View attachment 52869

View attachment 52868

View attachment 52867

 

[enzo47]

View attachment 52884

View attachment 52886

 

[PopRocket123]

View attachment 52884

That's my kink, phat torches on skinny guns

View attachment 52885

 

[Albiscuit]

Well, it took all day, but I no longer own an Alpine Krytac AEG Vector.

I now own an Alpine KWA GBB Vector ?

View attachment 52869

View attachment 52868

View attachment 52867

Beautiful!! 

 

[Hellfish]

Mmmmmm ..... Swordfishy. 

Modded an SP89 foregrip that I'll fit tomorrow .... Should make the lines a bit more sleek. Not a fan of the MP5K drop grip. 

View attachment 53062

 

[Stevo4345]

Jesus wept, how that G&G GR14 Socom gearbox went back together I do not know! Should be warning on the box '3 people needed for assembly's

Anyway, got the replacement tappet plate from Fire Support yesterday, piston o-rings and shims from AK2M4 and got them installed. Waiting on the battery to charge to see if it will fire and cycle.

Previous owner re-painted the stock Krylon drab olive, I'm thinking of re-doing it with an old skool Tiger Stripe camo pattern, thoughts anyone?

View attachment 53081

View attachment 53082

 

[TheFull9]

Previous owner re-painted the stock Krylon drab olive, I'm thinking of re-doing it with an old skool Tiger Stripe camo pattern, thoughts anyone?

Definitely.

Also get some lipo/life packs instead of that ancient brick ?

 

[Stevo4345]

Also get some lipo/life packs instead of that ancient brick ?

Already done, I'm going to convert it to deans and am thinking of getting a MOSFET in there too. There's another issue going on though, out of the stock it fires fine, install everything in the stock and it fires one shot and locks up, bit of a head scratcher.

 

[Cromulon1994]

Started making headway into my dlt20 inspired rifle.

Couldnt find an agm stg44 l, and even then they're a bit "meh" so base is an ics c15. 

Fore end is home made to the sizes of an m1919 barrel shroud. Got halfway through making a steel one and burnt out that many drill bits I restarted with aluminium. 

Still to be done are side panels, top tube, a sight arrangement more like the film guns, and an inbuilt torch and laser hidden in some of the "greeblie" bits. 

There will be no 3d printed or resin bits on this one. 

I will probably keep the stock original as I like it. 

Everything will then be disassembled, polished and then chemically blackened. 

I'm about 6 hours into this already. 

And it has a tracer hidden in the shroud. 

View attachment 53091

 

[Raytd]

Definitely.

Also get some lipo/life packs instead of that ancient brick ?

I have a black hawk down tan and brown Tiger  stripe colour scheme on my one 

Started making headway into my dlt20 inspired rifle.

Couldnt find an agm stg44 l, and even then they're a bit "meh" so base is an ics c15. 

Fore end is home made to the sizes of an m1919 barrel shroud. Got halfway through making a steel one and burnt out that many drill bits I restarted with aluminium. 

Still to be done are side panels, top tube, a sight arrangement more like the film guns, and an inbuilt torch and laser hidden in some of the "greeblie" bits. 

There will be no 3d printed or resin bits on this one. 

I will probably keep the stock original as I like it. 

Everything will then be disassembled, polished and then chemically blackened. 

I'm about 6 hours into this already. 

And it has a tracer hidden in the shroud. 

View attachment 53091

Someone made conversion kits online for free find someone with a 3d printer

 

[Cromulon1994]

I have a black hawk down tan and brown Tiger  stripe colour scheme on my one 

Someone made conversion kits online for free find someone with a 3d printer

Not after 3d printed parts, after a metal build, and kitbashed the old fashioned way. More fun. 

 

[Robbie10]

WE GBB Mk18

View attachment 53111

 

[TheFull9]

There's another issue going on though, out of the stock it fires fine, install everything in the stock and it fires one shot and locks up, bit of a head scratcher.

That's Mother Airsoft (Nature's annoying great-niece twice removed) testing your resolve to not just yeet stupid shit at a bloody wall.

 

[Cromulon1994]

I'm about 90% done on this now, star wars DLT 20 inspired thing. 

I'll probably change the stock, was going to keep it but it will just finish it off, tomorrow it gets weathered. 

The barrel is chemically blackened, and just needs its heat colouration adding. 

There's a functional laser in the small diameter tube on top of the vented outer barrel, a tracer unit, and a nerf sight maguivered onto the front of a red dot.

Other little greeblies have been added, and there's a couple still to go on. A circuit board from something, the flash moderator is mounted where they put them on the film m16 based guns.

So it's all functional. 

And it's all pretty solid. 

View attachment 53147