SgtTalbert
Members
- Jan 26, 2012
- 871
- 373
-
Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.
The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here
If you have any issues please post about them in the Forum Feedback thread: Go Here
Gun picture thread
- Thread starter M_P
- Start date
View attachment 45076View attachment 45077
LCT AS Val, I've tried to make it look weathered, needs a little more effort before it looks how I want it, but close enough. I used photos of the real Vals to get a realistic wear. By far the best RIF I've ever owned
LCT AS Val, I've tried to make it look weathered, needs a little more effort before it looks how I want it, but close enough. I used photos of the real Vals to get a realistic wear. By far the best RIF I've ever owned
Last edited by a moderator:
sonofsammo
Members
- Feb 3, 2018
- 1,448
- 436
Looks awesome!
What's range and accuracy like?
What was the fps when you got it?
Have you changed anything internally?
Sorry for the quiz - I'm eyeing one up ?
Range and accuracy was pretty good out of the box, fps I can’t remember, but likely between 320-340. Practically nothing is stock, but there’s no need to upgrade it, i just wanted to make a high rof build and then I decided to make a DMR...
I call this my low-crapa. Made mainly out of a worn out WE 1911 I was given to butcher for one of my springer pistol projects but seemed a waste of even a naff gbb seen as it was technically still functioning. Few old junk spares, CJ barrel/hop I got cheap and ended up not using from another project. The only bit I bought was the sights for £20 and the cj barrel £12 so for what's gone into it the results are actually not bad. With the lighter hammer/recoil springs, stock tm 4.3 capa slide it's a hell of a lot more efficient. You'll also notice the lack of recoil guide. I had to make a short plug & guide out the original 1911 one. In all quite pleased with it, just need to raid the kids Lego for rods for the sights.
View attachment 45092
View attachment 45093
View attachment 45094
View attachment 45095
View attachment 45092
View attachment 45093
View attachment 45094
View attachment 45095
Last edited by a moderator:
V
VeniVidiVici
Guest
M
Marauder211
Guest
Hi, i regret to inform you that i took the batteries out and threw it away, i felt that since it was destroyed i felt there was no point to keeping it. Sorry, dude.
G&G GR300 Pro Shorty. It's very old and none of the trades were etched (just screen printed). Trust me these are the magneseum cast lower and upper.
Solid stock rather than the wire one, I have the wire one in a drawer, I just don't like the weight when the battery is in the front.
Solid stock rather than the wire one, I have the wire one in a drawer, I just don't like the weight when the battery is in the front.
Last edited by a moderator:
SgtTalbert
Members
- Jan 26, 2012
- 871
- 373
G&G GR300 Pro Shorty. It's very old and none of the trades were etched (just screen printed). Trust me these are the magneseum cast lower and upper.
Solid stock rather than the wire one, I have the wire one in a drawer, I just don't like the weight when the battery is in the front.
I keep looking out for one of these
Asomodai
AF-UK patch owner
- Jun 14, 2017
- 3,139
- 1,047
G&G GR300 Pro Shorty. It's very old and none of the trades were etched (just screen printed). Trust me these are the magneseum cast lower and upper.
Solid stock rather than the wire one, I have the wire one in a drawer, I just don't like the weight when the battery is in the front.
You know for an M4 type that looks the danglys!
Just had some things come through.
PDRC silencer adapter.
View attachment 45131
And this beast arrived.
View attachment 45132
236 euros, brand new from San Marino softairgames. A&K MK43 M60 Seals. Its blooming heavy and I have a big stupid grin all over my face looking at it!
Last edited by a moderator:
Druid799
Supporters
- Sep 9, 2015
- 4,695
- 2,403
SgtTalbert
Members
- Jan 26, 2012
- 871
- 373
My latest acquisition for a possible Russian Chechen war loadout. External changes smooth dust cover and the front handguards swapped for real steel plum. the gp-30/gp-34 ish grenade launcher. ( the two hand grenades are the TAG rgd-5) Just need some better-looking plum and bakelite/fakerlite mags
View attachment 45176
View attachment 45177
View attachment 45178
View attachment 45179
View attachment 45176
View attachment 45177
View attachment 45178
View attachment 45179
Last edited by a moderator:
C
comrade vinnie
Guest
Sniper780 Where did you get the grenades from mate? Nice looking AK as well.
Airsoft world bit pricy mind, but if looks are important then they are currently the only option for Russian style pyro. https://www.airsoftworld.net/tag-innovation-tag-19-airsoft-bb-shrapnel-grenade-pack-of-6.html
AK47frizzle
Members
- Apr 5, 2013
- 1,453
- 468
Last edited by a moderator:
Nick G
Members
- Mar 18, 2018
- 1,307
- 903
WE Sig 226 E2 Arrived today to compliment my L119, got a game on Sunday so will give it a run out ?
View attachment 45202
View attachment 45202
DarkAssassin
Members
- Dec 23, 2015
- 219
- 195
C
comrade vinnie
Guest
Last edited:
AK47frizzle
Members
- Apr 5, 2013
- 1,453
- 468
oOohh
Was wondering, how many shots do you get out of it? My WE version currently gets around 90 with some mods done to it.
Similar threads
