Gears and motor
- Thread starter Aux
- Start date
Pseudotectonic
Members
- May 7, 2022
- 472
- 307
adjusted motor height?
should explain why it works when you pop'd back the old motor in, the height may be adjusted for the old motor but not the new motor.
should explain why it works when you pop'd back the old motor in, the height may be adjusted for the old motor but not the new motor.
- Thread starter
- #23
Exactly this! The guy at ak2m4 told me to try to find the perfect height with my thumb and found out that the base plate was too thick even when the middle screw was taken out, sanding it down made it work without overheating.
Rogerborg
Supporters
- Aug 22, 2017
- 9,187
- 6,050
Yup, there are no standards in airsoft, only a series of copies of copies. A millimetre sanded off here, or shimmed in there, can be necessary.
- Thread starter
- #25
Absolutely blew my head sanding 2-3mm off base plate made the temp go from 75degrees way down to 35 max.
