Smooth_Operator
AF-UK patch owner
- May 25, 2018
- 187
- 43
I have a Cybergun FAMAS Evo that I've decided to upgrade.
I've replaced the nozzle and piston for uprated ones that match the spec of the stock ones. (Nozzle is the correct length and piston has the correct number of teeth).
Since upgrading it, the nozzle returns to the wrong position after each shot (as if it partially retracted), meaning it double feeds BBs into the hop.
I've disassembled it and checked the position of all the gears, but no luck... I believe the sector gear should have the pin at the one o'clock position during reassembly, so this is what I've been doing.
Does anybody have any ideas/suggestions? I believe the gearbox is a clone of the TM FAMAS gearbox, but with a MOSFET.
I've replaced the nozzle and piston for uprated ones that match the spec of the stock ones. (Nozzle is the correct length and piston has the correct number of teeth).
Since upgrading it, the nozzle returns to the wrong position after each shot (as if it partially retracted), meaning it double feeds BBs into the hop.
I've disassembled it and checked the position of all the gears, but no luck... I believe the sector gear should have the pin at the one o'clock position during reassembly, so this is what I've been doing.
Does anybody have any ideas/suggestions? I believe the gearbox is a clone of the TM FAMAS gearbox, but with a MOSFET.
Last edited by a moderator:
