Boys m89 DE ump45 stock shortening

Egon_247

Egon_247

Members
Joined
Apr 6, 2022
Messages
382
Reaction score
503
My boy has bought himself an m89 ump45 from DE and only being little (he's 12 but a small 12) and the stock on his gnu seems a bit too long.

Anyone ever shortened a stock?

It's the folding type...

 
Egon_247 said:
It's the folding type...
Click to expand...
Click to shrink...


Had the same issue with the G&G UMP I owned a good while back - the length of pull was too much for what is ultimately a CQB gun. Ended up selling it because of the stock.

I know there are 3d-printed buffer tube adapters about - but I have no idea if they are compatible with the Double Eagle version.

 
Krisz said:
I would try to retrofit a shorter UMP stock first something like this: https://www.sixmm.com/en-gb/products/cyma-mp5-ump-foldable-airsoft-stock-for-mp5-mp5k-aeg-series. Ofc it's airsoft who knows if it's compatible.

More expensive solution is selling it and buying a Double Eagle M917C UTR45 which is very similar looking gun. 
Click to expand...
Click to shrink...




I'd say that won't work as the DE one has a battery hatch in the rear of the upper receiver. That said, you might be able to get the hinge pin out and swap the actual stock part over.

Egon_247 said:
My boy has bought himself an m89 ump45 from DE and only being little (he's 12 but a small 12) and the stock on his gnu seems a bit too long.

Anyone ever shortened a stock?

It's the folding type...
Click to expand...
Click to shrink...


Can he not just run it with the stock folded?

 
Lozart said:
Can he not just run it with the stock folded?
Click to expand...
Click to shrink...
I did suggest that, but he likes to pull into his shoulder. 

I'm thinking I might be able to cut the butt plate off and reattach a bit further forward. Hmmm.. I can hear the a team music coming on....??

 
Egon_247 said:
I'm thinking I might be able to cut the butt plate off and reattach a bit further forward. Hmmm.. I can hear the a team music coming on....??
Click to expand...
Click to shrink...


You could certainly try - I mean TommyBuilt G36s and UMPs are made by reworking the plastic of the civilian H&K models - welding new sections of receiver together.

There are quite a few videos on YouTube about using a soldering iron to weld broken plastic pieces together. It would probably look a bit gopping on your first go, but you could use a cheap 2nd hand G36 stock to practice on. Just try it in a well ventilated area.

 
Ahaaaa. Apparently there's a 3d printed doodad that allows you to fit an m4 stock to the hinge....might go looking for one of those.....

 
Well, as i cant stand threads that just die off and no one knows what happened.....this happened....

I bought the M4 conversion piece (aliexpress, was about £8 and is 3d printed) and fitted it. The M4 tube mounting screw was about 10mm too long but an M6 nut and a couple of washers and jobs a good un. 

While i was doing that, i did actually cut his original stock down and with some M4 countersunk bolts, a bit of plate and some swearing, i managed to cut about 12cm off and remount the shoulder part.

I'll get some pics tonight when i get home from work but he's a happy chap again. So happy that he bought an MP5.  KIDS!!!!! 

 
You must log in or register to reply here.
Back
Top