Best lipo battery’s ?
- Thread starter El aston
- Start date
Can't go wrong with Turnigy or Turnigy Nanos...
Surprisingly there's actually only about 4 factories that make Lipos and they're all in China. So many brands are likely to have come from the same factory and been rewrapped. Or a 25% chance anyway... :lol:
Surprisingly there's actually only about 4 factories that make Lipos and they're all in China. So many brands are likely to have come from the same factory and been rewrapped. Or a 25% chance anyway... :lol:
clumpyedge
AF-UK patch owner
- Aug 5, 2013
- 2,216
- 579
Vapex
Kong power
Nuprol (probably the only thing id suggest of nuprol)
Giant power
Turnigy
Kong power
Nuprol (probably the only thing id suggest of nuprol)
Giant power
Turnigy
- Thread starter
- #6
How do you get on with this in the cqb mate. Fits okay in the stock ?
Thank you guys, will look at these batteries turnigy seems popular
Swampysteve
Members
- Dec 28, 2018
- 76
- 13
I'm just about to go lipo to so interesting reading all the replies.
I'd be normally happy to stick with my 9.6 NiMH but new stock has zero space for a nunchuck style so need to go smaller.
Not to hijack the post BUT what lipo chargers do people use/recommend. Most I've seen are quite pricey.
I'd be normally happy to stick with my 9.6 NiMH but new stock has zero space for a nunchuck style so need to go smaller.
Not to hijack the post BUT what lipo chargers do people use/recommend. Most I've seen are quite pricey.
Imax b6ac from hobby king £35.
https://hobbyking.com/en_us/imax-b6ac-v2-professional-balance-charger-discharger-uk-plug.html
You could get the slightly cheaper non ac variant, but then you have to find a power brick for it as well. The AC one runs on mains power so it's all self-contained.
It's not powerful enough for gang charging, but you shouldn't be doing that if you need advice on chargers.
https://hobbyking.com/en_us/imax-b6ac-v2-professional-balance-charger-discharger-uk-plug.html
You could get the slightly cheaper non ac variant, but then you have to find a power brick for it as well. The AC one runs on mains power so it's all self-contained.
It's not powerful enough for gang charging, but you shouldn't be doing that if you need advice on chargers.
Last edited by a moderator:
If I wanted pricey I'd go with the Skyrc Q200.
4 channels and capable of 5 amps on each channel without needing special provision. It'll probably be my next charger TBF unless something new comes along in the meantime.
https://www.hobbyrc.co.uk/skyrc-q200-quatrro-4-channel-200w-ac-balance-charger
4 channels and capable of 5 amps on each channel without needing special provision. It'll probably be my next charger TBF unless something new comes along in the meantime.
https://www.hobbyrc.co.uk/skyrc-q200-quatrro-4-channel-200w-ac-balance-charger
Swampysteve
Members
- Dec 28, 2018
- 76
- 13
Cheers guys, no won't be charging more than one at time so that link should work a treat ?
@Iceni is this the same? Hobbyking out of stock
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F312404387635
@Iceni is this the same? Hobbyking out of stock
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F312404387635
It's a clone of the V1 b6. So use paypal so you can send it back if it's a dud.
Other than that watch it like a hawk for the first couple of charges to make sure it doesn't get too hot and it cuts off at the correct voltage.
There are hundreds of clones out there, a lot of people don't even realise their clones.
I can't advise you to pick it up or avoid tho. You know what it is, and buy it knowing the risks.
It's also the stock B6 and uses a power brick, rather than the inbuilt design.
Other than that watch it like a hawk for the first couple of charges to make sure it doesn't get too hot and it cuts off at the correct voltage.
There are hundreds of clones out there, a lot of people don't even realise their clones.
I can't advise you to pick it up or avoid tho. You know what it is, and buy it knowing the risks.
It's also the stock B6 and uses a power brick, rather than the inbuilt design.
Last edited by a moderator:
- Thread starter
- #14
Swampysteve
Members
- Dec 28, 2018
- 76
- 13
Great advice!! ?
EDcase
AF-UK patch owner
- Jun 24, 2017
- 3,600
- 1,590
I got these as its a very good deal:
https://www.fire-support.co.uk/product/kong-power-74v-1300mah-20c-lipo-rechargeable-battery-stick-packdeans-2-packs
To replace any standard NiMH battery (even 9.6v), get 7.4v LiPo. Do not get 11.1v
The mAh, get highest you can fit.
...and convert to DEANS (Read up on it. Not that hard to do. Reduces resistance so helps battery life while reducing heat build-up)
https://www.fire-support.co.uk/product/kong-power-74v-1300mah-20c-lipo-rechargeable-battery-stick-packdeans-2-packs
To replace any standard NiMH battery (even 9.6v), get 7.4v LiPo. Do not get 11.1v
The mAh, get highest you can fit.
...and convert to DEANS (Read up on it. Not that hard to do. Reduces resistance so helps battery life while reducing heat build-up)
Last edited by a moderator:
Druid799
Supporters
- Sep 9, 2015
- 4,695
- 2,403
Blood Hell ! Fire support having something at a good price ! Not something you see every day ! ?
Think that’s a very good deal .?
- Thread starter
- #20
Top guy thank you, yeah literally just read up about it! Makes sense too. Thank you man
Similar threads
