ARP 9 MOSFET/FUSE decision

W

Wegalaxy

Members
Joined
Apr 8, 2023
Messages
183
Reaction score
37
Hello. 

My ARP 9s MOSFET wire keeps breaking off. I have soldered it back on now twice both sides!!!

There's just no room in the stock for the everything with out bending the wires. EVEN WITH THE STOCK EXTENTION.

Plus the wiring looks terrible. I've noticed tho if I completely removed the MOSFET I would have space for everything. 

What are the dangers of removing the MOSFET and would my gun work without it???

I use a 11.1 lipo and a it has a ETU 

Thanks

Link to a picture of the issue as the image is to big of a file to add.

https://www.reddit.com/r/airsoft/comments/wcb0n9/the_cord_for_my_battery_is_broken_how_do_i_go/

 
Last edited by a moderator:
Use a shorter battery.

My Honeybadger is the same so I use a smaller lipo.

 
If it is a G&G, the mosfet and the ETU are both required for it to work.

Can you post a picture of the mosfet?

 
Wegalaxy said:
@Colin AllenI have put a link to a picture of the problem because the file is too big to post.

Thanks 
Click to expand...
Click to shrink...
The part where the wire has disconnected is the fuse, not a mosfet.  The mosfet part of your ETU is the other item by your little finger.  I would replace the G&G mosfet with the Perun ETU++, which just plugs in; it is a much better unit.  You could just get rid of the fuse, which would give you a bit more space.

Alternatively, bin the lot and install the far superior Perun V2 Hybrid; that would leave you with just wires in the stock tube.

 
Last edited by a moderator:
Hello,

My bad I thought they were the same thing haha. 

If I do remove the fuse what effect will that have on my gun?
Thanks 

@Colin Allen

 
hello,

Great ive removed the fuse and everything fits fine.

thanks

 
Wegalaxy said:
I use a 1,100 mah battery. Thought that was the smallest.

@ButcherBillwhat battery do you use???

Thanks
Click to expand...
Click to shrink...
I use these...

https://www.vapextech.co.uk/airsoft-7-4v-850mah-30c-lipo-battery-with-case-lp007-vapextech

I needed a small battery for my L85A3 so bought 5 of these, I use them in pretty much everything except my AK's & AR15's as they mostly need a narrow stick or nunchuck style. They're ideal for my Honeybadger due to the short butt stock.

 
You must log in or register to reply here.
Back
Top